linux-kernel - [PATCH v5 1/2] PM / devfreq: exynos: Use Use devm_clk_get

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240510094034.12493-1-linux.amoon@gmail.com>
Date: Fri, 10 May 2024 15:10:24 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Chanwoo Choi <cw00.choi@...sung.com>,
	MyungJoo Ham <myungjoo.ham@...sung.com>,
	Kyungmin Park <kyungmin.park@...sung.com>,
	Krzysztof Kozlowski <krzk@...nel.org>,
	Alim Akhtar <alim.akhtar@...sung.com>
Cc: Anand Moon <linux.amoon@...il.com>,
	Christophe JAILLET <christophe.jaillet@...adoo.fr>,
	linux-pm@...r.kernel.org,
	linux-samsung-soc@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v5 1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the calls to clk_disable_unprepare().

While at it, use dev_err_probe consistently, and use its return value
to return the error code.

Signed-off-by: Anand Moon <linux.amoon@...il.com>
---
v5 - No change
V4 - wrap up the error messagee within 80 char
v3 - No change
v2 - No change
---
 drivers/devfreq/exynos-bus.c | 22 +++++-----------------
 1 file changed, 5 insertions(+), 17 deletions(-)

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index 00118580905a..7d06c476d8e9 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -160,7 +160,6 @@ static void exynos_bus_exit(struct device *dev)
 	platform_device_unregister(bus->icc_pdev);
 
 	dev_pm_opp_of_remove_table(dev);
-	clk_disable_unprepare(bus->clk);
 	dev_pm_opp_put_regulators(bus->opp_token);
 }
 
@@ -171,7 +170,6 @@ static void exynos_bus_passive_exit(struct device *dev)
 	platform_device_unregister(bus->icc_pdev);
 
 	dev_pm_opp_of_remove_table(dev);
-	clk_disable_unprepare(bus->clk);
 }
 
 static int exynos_bus_parent_parse_of(struct device_node *np,
@@ -247,23 +245,16 @@ static int exynos_bus_parse_of(struct device_node *np,
 	int ret;
 
 	/* Get the clock to provide each bus with source clock */
-	bus->clk = devm_clk_get(dev, "bus");
-	if (IS_ERR(bus->clk)) {
-		dev_err(dev, "failed to get bus clock\n");
-		return PTR_ERR(bus->clk);
-	}
-
-	ret = clk_prepare_enable(bus->clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to get enable clock\n");
-		return ret;
-	}
+	bus->clk = devm_clk_get_enabled(dev, "bus");
+	if (IS_ERR(bus->clk))
+		return dev_err_probe(dev, PTR_ERR(bus->clk),
+				"failed to get bus clock\n");
 
 	/* Get the freq and voltage from OPP table to scale the bus freq */
 	ret = dev_pm_opp_of_add_table(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to get OPP table\n");
-		goto err_clk;
+		return ret;
 	}
 
 	rate = clk_get_rate(bus->clk);
@@ -281,8 +272,6 @@ static int exynos_bus_parse_of(struct device_node *np,
 
 err_opp:
 	dev_pm_opp_of_remove_table(dev);
-err_clk:
-	clk_disable_unprepare(bus->clk);
 
 	return ret;
 }
@@ -453,7 +442,6 @@ static int exynos_bus_probe(struct platform_device *pdev)
 
 err:
 	dev_pm_opp_of_remove_table(dev);
-	clk_disable_unprepare(bus->clk);
 err_reg:
 	dev_pm_opp_put_regulators(bus->opp_token);
 
-- 
2.44.0