lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240510100730.18805-8-ilpo.jarvinen@linux.intel.com>
Date: Fri, 10 May 2024 13:07:30 +0300
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: linux-pci@...r.kernel.org,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Mahesh J Salgaonkar <mahesh@...ux.ibm.com>,
	Oliver O'Halloran <oohall@...il.com>,
	Lukas Wunner <lukas@...ner.de>,
	linux-kernel@...r.kernel.org,
	linuxppc-dev@...ts.ozlabs.org
Cc: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Subject: [PATCH v4 7/7] PCI: Create helper to print TLP Header and Prefix Log

Add pcie_print_tlp_log() helper to print TLP Header and Prefix Log.
Print End-End Prefixes only if they are non-zero.

Consolidate the few places which currently print TLP using custom
formatting.

The first attempt used pr_cont() instead of building a string first but
it turns out pr_cont() is not compatible with pci_err() and prints on a
separate line. When I asked about this, Andy Shevchenko suggested
pr_cont() should not be used in the first place (to eventually get rid
of it) so pr_cont() is now replaced with building the string first.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
---
 drivers/pci/pci.h      |  2 ++
 drivers/pci/pcie/aer.c | 10 ++--------
 drivers/pci/pcie/dpc.c |  5 +----
 drivers/pci/pcie/tlp.c | 31 +++++++++++++++++++++++++++++++
 4 files changed, 36 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 3d9034d89be8..bf13d2fc4bb7 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -424,6 +424,8 @@ int pcie_read_tlp_log(struct pci_dev *dev, int where, int where2,
 		      unsigned int tlp_len, struct pcie_tlp_log *log);
 unsigned int aer_tlp_log_len(struct pci_dev *dev);
 unsigned int dpc_tlp_log_len(struct pci_dev *dev);
+void pcie_print_tlp_log(const struct pci_dev *dev,
+			const struct pcie_tlp_log *log, const char *pfx);
 #endif	/* CONFIG_PCIEAER */
 
 #ifdef CONFIG_PCIEPORTBUS
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index ecc1dea5a208..efb9e728fe94 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -664,12 +664,6 @@ static void pci_rootport_aer_stats_incr(struct pci_dev *pdev,
 	}
 }
 
-static void __print_tlp_header(struct pci_dev *dev, struct pcie_tlp_log *t)
-{
-	pci_err(dev, "  TLP Header: %08x %08x %08x %08x\n",
-		t->dw[0], t->dw[1], t->dw[2], t->dw[3]);
-}
-
 static void __aer_print_error(struct pci_dev *dev,
 			      struct aer_err_info *info)
 {
@@ -724,7 +718,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
 	__aer_print_error(dev, info);
 
 	if (info->tlp_header_valid)
-		__print_tlp_header(dev, &info->tlp);
+		pcie_print_tlp_log(dev, &info->tlp, "  ");
 
 out:
 	if (info->id && info->error_dev_num > 1 && info->id == id)
@@ -796,7 +790,7 @@ void pci_print_aer(struct pci_dev *dev, int aer_severity,
 			aer->uncor_severity);
 
 	if (tlp_header_valid)
-		__print_tlp_header(dev, &aer->header_log);
+		pcie_print_tlp_log(dev, &aer->header_log, "  ");
 
 	trace_aer_event(dev_name(&dev->dev), (status & ~mask),
 			aer_severity, tlp_header_valid, &aer->header_log);
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 5056cc6961ec..598f74384471 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -220,10 +220,7 @@ static void dpc_process_rp_pio_error(struct pci_dev *pdev)
 	pcie_read_tlp_log(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG,
 			  cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG,
 			  dpc_tlp_log_len(pdev), &tlp_log);
-	pci_err(pdev, "TLP Header: %#010x %#010x %#010x %#010x\n",
-		tlp_log.dw[0], tlp_log.dw[1], tlp_log.dw[2], tlp_log.dw[3]);
-	for (i = 0; i < pdev->dpc_rp_log_size - 5; i++)
-		pci_err(pdev, "TLP Prefix Header: dw%d, %#010x\n", i, tlp_log.prefix[i]);
+	pcie_print_tlp_log(pdev, &tlp_log, "");
 
 	if (pdev->dpc_rp_log_size < 5)
 		goto clear_status;
diff --git a/drivers/pci/pcie/tlp.c b/drivers/pci/pcie/tlp.c
index 3615ca520c9a..59a28485696f 100644
--- a/drivers/pci/pcie/tlp.c
+++ b/drivers/pci/pcie/tlp.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/aer.h>
+#include <linux/array_size.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 
@@ -74,3 +75,33 @@ int pcie_read_tlp_log(struct pci_dev *dev, int where, int where2,
 
 	return 0;
 }
+
+/**
+ * pcie_print_tlp_log - Print TLP Header / Prefix Log contents
+ * @dev: PCIe device
+ * @log: TLP Log structure
+ * @pfx: String prefix (for print out indentation)
+ *
+ * Prints TLP Header and Prefix Log information held by @log.
+ */
+void pcie_print_tlp_log(const struct pci_dev *dev,
+			const struct pcie_tlp_log *log, const char *pfx)
+{
+	char buf[(10 + 1) * (4 + ARRAY_SIZE(log->prefix)) + 14 + 1];
+	unsigned int i;
+	int len;
+
+	len = scnprintf(buf, sizeof(buf), "%#010x %#010x %#010x %#010x",
+			log->dw[0], log->dw[1], log->dw[2], log->dw[3]);
+
+	if (log->prefix[0])
+		len += scnprintf(buf + len, sizeof(buf) - len, " E-E Prefixes:");
+	for (i = 0; i < ARRAY_SIZE(log->prefix); i++) {
+		if (!log->prefix[i])
+			break;
+		len += scnprintf(buf + len, sizeof(buf) - len,
+				 " %#010x", log->prefix[i]);
+	}
+
+	pci_err(dev, "%sTLP Header: %s\n", pfx, buf);
+}
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ