| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240510-topic-msm-polling-cleanup-v2-30-436ca4218da2@linaro.org>
Date: Fri, 10 May 2024 13:59:53 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, cros-qcom-dts-watchers@...omium.org,
Krzysztof Kozlowski <krzk+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH v2 30/31] arm64: dts: qcom: sm8550-*: Remove thermal zone
polling delays
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/pm8010.dtsi | 2 -
arch/arm64/boot/dts/qcom/pm8550.dtsi | 1 -
arch/arm64/boot/dts/qcom/pm8550b.dtsi | 1 -
arch/arm64/boot/dts/qcom/pm8550ve.dtsi | 1 -
arch/arm64/boot/dts/qcom/pm8550vs.dtsi | 4 --
arch/arm64/boot/dts/qcom/pmr735d_a.dtsi | 1 -
arch/arm64/boot/dts/qcom/pmr735d_b.dtsi | 1 -
arch/arm64/boot/dts/qcom/sm8550.dtsi | 82 ++++++---------------------------
8 files changed, 13 insertions(+), 80 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi
index 0ea641e12209..ef330194946b 100644
--- a/arch/arm64/boot/dts/qcom/pm8010.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi
@@ -10,7 +10,6 @@ / {
thermal-zones {
pm8010-m-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8010_m_temp_alarm>;
@@ -31,7 +30,6 @@ trip1 {
pm8010-n-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8010_n_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index 797a18c249a4..896bcacb6490 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -10,7 +10,6 @@ / {
thermal-zones {
pm8550-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8550_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
index 72609f31c890..74d23b8970f4 100644
--- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
@@ -10,7 +10,6 @@ / {
thermal-zones {
pm8550b-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8550b_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
index 4dc1f03ab2c7..9d4734eabf5a 100644
--- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -10,7 +10,6 @@ / {
thermal-zones {
pm8550ve-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8550ve_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
index 97b1c18aa7d8..6426b431616b 100644
--- a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
@@ -10,7 +10,6 @@ / {
thermal-zones {
pm8550vs-c-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8550vs_c_temp_alarm>;
@@ -31,7 +30,6 @@ trip1 {
pm8550vs-d-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8550vs_d_temp_alarm>;
@@ -52,7 +50,6 @@ trip1 {
pm8550vs-e-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8550vs_e_temp_alarm>;
@@ -73,7 +70,6 @@ trip1 {
pm8550vs-g-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8550vs_g_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
index 37daaefe3431..f9f1793d310e 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
@@ -10,7 +10,6 @@ / {
thermal-zones {
pmr735d-k-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pmr735d_k_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
index 3b470f6ac46f..d91fbd3bff10 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
@@ -10,7 +10,6 @@ / {
thermal-zones {
pmr735d-l-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pmr735d_l_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index bc5aeb05ffc3..51c547872438 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -4571,8 +4571,6 @@ compute-cb@8 {
thermal-zones {
aoss0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 0>;
trips {
@@ -4591,8 +4589,6 @@ reset-mon-config {
};
cpuss0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 1>;
trips {
@@ -4611,8 +4607,6 @@ reset-mon-config {
};
cpuss1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 2>;
trips {
@@ -4631,8 +4625,6 @@ reset-mon-config {
};
cpuss2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 3>;
trips {
@@ -4651,8 +4643,6 @@ reset-mon-config {
};
cpuss3-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 4>;
trips {
@@ -4671,8 +4661,6 @@ reset-mon-config {
};
cpu3-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 5>;
trips {
@@ -4697,8 +4685,6 @@ cpu3_top_crit: cpu-critical {
};
cpu3-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 6>;
trips {
@@ -4723,8 +4709,6 @@ cpu3_bottom_crit: cpu-critical {
};
cpu4-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 7>;
trips {
@@ -4749,8 +4733,6 @@ cpu4_top_crit: cpu-critical {
};
cpu4-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 8>;
trips {
@@ -4775,8 +4757,6 @@ cpu4_bottom_crit: cpu-critical {
};
cpu5-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 9>;
trips {
@@ -4801,8 +4781,6 @@ cpu5_top_crit: cpu-critical {
};
cpu5-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 10>;
trips {
@@ -4827,8 +4805,6 @@ cpu5_bottom_crit: cpu-critical {
};
cpu6-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 11>;
trips {
@@ -4853,8 +4829,6 @@ cpu6_top_crit: cpu-critical {
};
cpu6-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 12>;
trips {
@@ -4879,8 +4853,6 @@ cpu6_bottom_crit: cpu-critical {
};
cpu7-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 13>;
trips {
@@ -4905,8 +4877,6 @@ cpu7_top_crit: cpu-critical {
};
cpu7-middle-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 14>;
trips {
@@ -4931,8 +4901,6 @@ cpu7_middle_crit: cpu-critical {
};
cpu7-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 15>;
trips {
@@ -4957,8 +4925,6 @@ cpu7_bottom_crit: cpu-critical {
};
aoss1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 0>;
trips {
@@ -4977,8 +4943,6 @@ reset-mon-config {
};
cpu0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 1>;
trips {
@@ -5003,8 +4967,6 @@ cpu0_crit: cpu-critical {
};
cpu1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 2>;
trips {
@@ -5029,8 +4991,6 @@ cpu1_crit: cpu-critical {
};
cpu2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 3>;
trips {
@@ -5056,7 +5016,7 @@ cpu2_crit: cpu-critical {
cdsp0-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 4>;
trips {
@@ -5088,7 +5048,7 @@ cdsp0_junction_config: junction-config {
cdsp1-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 5>;
trips {
@@ -5120,7 +5080,7 @@ cdsp1_junction_config: junction-config {
cdsp2-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 6>;
trips {
@@ -5152,7 +5112,7 @@ cdsp2_junction_config: junction-config {
cdsp3-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 7>;
trips {
@@ -5183,8 +5143,6 @@ cdsp3_junction_config: junction-config {
};
video-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 8>;
trips {
@@ -5204,7 +5162,7 @@ reset-mon-config {
mem-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens1 9>;
trips {
@@ -5229,8 +5187,6 @@ reset-mon-config {
};
modem0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 10>;
trips {
@@ -5261,8 +5217,6 @@ reset-mon-config {
};
modem1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 11>;
trips {
@@ -5293,8 +5247,6 @@ reset-mon-config {
};
modem2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 12>;
trips {
@@ -5325,8 +5277,6 @@ reset-mon-config {
};
modem3-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 13>;
trips {
@@ -5357,8 +5307,6 @@ reset-mon-config {
};
camera0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 14>;
trips {
@@ -5377,8 +5325,6 @@ reset-mon-config {
};
camera1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 15>;
trips {
@@ -5397,8 +5343,6 @@ reset-mon-config {
};
aoss2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens2 0>;
trips {
@@ -5418,7 +5362,7 @@ reset-mon-config {
gpuss-0-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 1>;
cooling-maps {
@@ -5457,7 +5401,7 @@ gpu0_junction_config: junction-config {
gpuss-1-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 2>;
cooling-maps {
@@ -5496,7 +5440,7 @@ gpu1_junction_config: junction-config {
gpuss-2-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 3>;
cooling-maps {
@@ -5535,7 +5479,7 @@ gpu2_junction_config: junction-config {
gpuss-3-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 4>;
cooling-maps {
@@ -5574,7 +5518,7 @@ gpu3_junction_config: junction-config {
gpuss-4-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 5>;
cooling-maps {
@@ -5613,7 +5557,7 @@ gpu4_junction_config: junction-config {
gpuss-5-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 6>;
cooling-maps {
@@ -5652,7 +5596,7 @@ gpu5_junction_config: junction-config {
gpuss-6-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 7>;
cooling-maps {
@@ -5691,7 +5635,7 @@ gpu6_junction_config: junction-config {
gpuss-7-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 8>;
cooling-maps {
--
2.40.1
Powered by blists - more mailing lists