linux-kernel - [PATCH 3/7] drm/bridge: cdns-dsi: Wait for Clk and Data Lanes to be ready

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240511153051.1355825-4-a-bhatia1@ti.com>
Date: Sat, 11 May 2024 21:00:47 +0530
From: Aradhya Bhatia <a-bhatia1@...com>
To: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
        Andrzej Hajda
	<andrzej.hajda@...el.com>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Robert
 Foss <rfoss@...nel.org>,
        Laurent Pinchart
	<Laurent.pinchart@...asonboard.com>,
        Jonas Karlman <jonas@...boo.se>,
        Jernej
 Skrabec <jernej.skrabec@...il.com>,
        Maarten Lankhorst
	<maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard <mripard@...nel.org>, Jyri
 Sarha <jyri.sarha@....fi>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        David
 Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>
CC: DRI Development List <dri-devel@...ts.freedesktop.org>,
        Linux Kernel List
	<linux-kernel@...r.kernel.org>,
        Sam Ravnborg <sam@...nborg.org>, Thierry
 Reding <treding@...dia.com>,
        Kieran Bingham
	<kieran.bingham+renesas@...asonboard.com>,
        Boris Brezillon
	<boris.brezillon@...tlin.com>,
        Nishanth Menon <nm@...com>, Vignesh
 Raghavendra <vigneshr@...com>,
        Praneeth Bajjuri <praneeth@...com>, Udit Kumar
	<u-kumar1@...com>,
        Devarsh Thakkar <devarsht@...com>,
        Jayesh Choudhary
	<j-choudhary@...com>, Jai Luthra <j-luthra@...com>,
        Aradhya Bhatia
	<a-bhatia1@...com>
Subject: [PATCH 3/7] drm/bridge: cdns-dsi: Wait for Clk and Data Lanes to be ready

Once the DSI Link and DSI Phy are initialized, the code needs to wait
for Clk and Data Lanes to be ready, before continuing configuration.
This is in accordance with the DSI Start-up procedure, found in the
Technical Reference Manual of Texas Instrument's J721E SoC[0] which
houses this DSI TX controller.

If the previous bridge (or crtc/encoder) are configured pre-maturely,
the input signal FIFO gets corrupt. This introduces a color-shift on the
display.

Allow the driver to wait for the clk and data lanes to get ready during
DSI enable.

Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver")
Signed-off-by: Aradhya Bhatia <a-bhatia1@...com>
---
 drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
index 557b037bbc67..05d2f4cc50da 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
@@ -761,7 +761,7 @@ static void cdns_dsi_bridge_enable(struct drm_bridge *bridge)
 	struct phy_configure_opts_mipi_dphy *phy_cfg = &output->phy_opts.mipi_dphy;
 	unsigned long tx_byte_period;
 	struct cdns_dsi_cfg dsi_cfg;
-	u32 tmp, reg_wakeup, div;
+	u32 tmp, reg_wakeup, div, status;
 	int nlanes;
 
 	if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0))
@@ -778,6 +778,17 @@ static void cdns_dsi_bridge_enable(struct drm_bridge *bridge)
 	cdns_dsi_init_link(dsi);
 	cdns_dsi_hs_init(dsi);
 
+	/*
+	 * Now that the DSI Link and DSI Phy are initialized,
+	 * wait for the CLK and Data Lanes to be ready.
+	 */
+	tmp = CLK_LANE_RDY;
+	for (int i = 0; i < nlanes; i++)
+		tmp |= DATA_LANE_RDY(i);
+
+	WARN_ON_ONCE(readl_poll_timeout(dsi->regs + MCTL_MAIN_STS, status,
+					status & tmp, 100, 0));
+
 	writel(HBP_LEN(dsi_cfg.hbp) | HSA_LEN(dsi_cfg.hsa),
 	       dsi->regs + VID_HSIZE1);
 	writel(HFP_LEN(dsi_cfg.hfp) | HACT_LEN(dsi_cfg.hact),
-- 
2.34.1