lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Sat, 11 May 2024 17:25:00 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: David Lechner <dlechner@...libre.com>
Cc: Mariel Tinaco <Mariel.Tinaco@...log.com>, linux-iio@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, Lars-Peter
 Clausen <lars@...afoo.de>, Rob Herring <robh@...nel.org>, Krzysztof
 Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Liam
 Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, Michael
 Hennerich <Michael.Hennerich@...log.com>, Marcelo Schmitt
 <marcelo.schmitt1@...il.com>, Dimitri Fedrau <dima.fedrau@...il.com>,
 Guenter Roeck <linux@...ck-us.net>
Subject: Re: [PATCH 1/2] dt-bindings: iio: dac: add docs for ad8460

On Fri, 10 May 2024 12:28:19 -0500
David Lechner <dlechner@...libre.com> wrote:

> On Fri, May 10, 2024 at 1:42 AM Mariel Tinaco <Mariel.Tinaco@...log.com> wrote:
> >
> > This adds the bindings documentation for the 14-bit
> > High Voltage, High Current, Waveform Generator
> > Digital-to-Analog converter.
> >
> > Signed-off-by: Mariel Tinaco <Mariel.Tinaco@...log.com>
> > ---
> >  .../bindings/iio/dac/adi,ad8460.yaml          | 67 +++++++++++++++++++
> >  MAINTAINERS                                   |  7 ++
> >  2 files changed, 74 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
> > new file mode 100644
> > index 000000000..924f76209
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
> > @@ -0,0 +1,67 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright 2024 Analog Devices Inc.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/dac/adi,ad8460.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices AD8460 DAC
> > +
> > +maintainers:
> > +  - Mariel Tinaco <mariel.tinaco@...log.com>
> > +
> > +description: |
> > +  Analog Devices AD8460 110 V High Voltage, 1 A High Current,
> > +  Arbitrary Waveform Generator with Integrated 14-Bit High Speed DAC
> > +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad8460.pdf
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - adi,ad8460
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  spi-max-frequency:
> > +    maximum: 20000000
> > +
> > +  vref-supply:  
> 
> It would be nice to make the property name match the pin name since
> there is more than one reference voltage input.
> 
> refio-1p2v-supply:
> 
> > +    description: Drive voltage in the range of 1.2V maximum to as low as
> > +      low as 0.12V through the REF_IO pin to adjust full scale output span  
> 
> I don't seen anything in the datasheet named REF_IO. Is this a typo
> and it should be REFIO_1P2V?
> 
> > +
> > +  clocks:
> > +    description: The clock for the DAC. This is the sync clock
> > +
> > +  adi,rset-ohms:
> > +    description: Specify value of external resistor connected to FS_ADJ pin
> > +      to establish internal HVDAC's reference current I_REF
> > +    minimum: 2000
> > +    maximum: 20000
> > +  
> 
> I see lots more pins on the datasheet, many of which should be trivial
> to add bindings for (we prefer to have the bindings as complete as
> possible even if the driver doesn't implement everything). Potential
> candidates:
> 
> sdn-reset-gpios: (active high)
> reset-gpios: (active low)
> sdn-io-gpios: (active high)
> 
> hvcc-supply:
> hvee-supply:
> vcc-5v-supply:
> vref-5v-supply:
> dvdd-3p3v-supply:
> avdd-3p3v-supply:
> 
> It also looks like there is a parallel interface for data, so I would
> expect to see an io-backends property that links to the PHY used for
> handling that.
> 
Ultimately yes, but the parallel interface might require some decisions on 
binding that are non obvious until it's actually implemented. So maybe
don't need that bit from the start.  The rest I agree should be here.


> 
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +
> > +allOf:
> > +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +
> > +    spi {
> > +        dac@0 {
> > +            compatible = "adi,ad8460";
> > +            reg = <0>;
> > +            spi-max-frequency = <8000000>;
> > +            adi,rset-ohms = <2000>;
> > +
> > +            vref-supply = <&vrefio>;
> > +            clocks = <&sync_ext_clk>;
> > +        };
> > +    };
> > +
> > +...
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 758c202ec..dae93df2a 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1234,6 +1234,13 @@ W:       https://ez.analog.com/linux-software-drivers
> >  F:     Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> >  F:     drivers/iio/adc/ad7780.c
> >
> > +ANALOG DEVICES INC AD8460 DRIVER
> > +M:     Mariel Tinaco <Mariel.Tinaco@...log.com>
> > +L:     linux-iio@...r.kernel.org
> > +S:     Supported
> > +W:     https://ez.analog.com/linux-software-drivers
> > +F:     Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
> > +
> >  ANALOG DEVICES INC AD9739a DRIVER
> >  M:     Nuno Sa <nuno.sa@...log.com>
> >  M:     Dragos Bogdan <dragos.bogdan@...log.com>
> > --
> > 2.34.1
> >
> >  


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ