| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240512184845.GB24095@vamoiridPC>
Date: Sun, 12 May 2024 20:48:45 +0200
From: Vasileios Amoiridis <vassilisamir@...il.com>
To: Jonathan Cameron <jic23@...nel.org>
Cc: Vasileios Amoiridis <vassilisamir@...il.com>, lars@...afoo.de,
andriy.shevchenko@...ux.intel.com, ang.iglesiasg@...il.com,
mazziesaccount@...il.com, ak@...klinger.de,
petre.rodan@...dimension.ro, phil@...pberrypi.com, 579lpy@...il.com,
linus.walleij@...aro.org, semen.protsenko@...aro.org,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 8/9] iio: pressure: bmp280: Add SCALE, RAW values in
channels and refactorize them
On Sun, May 12, 2024 at 01:29:14PM +0100, Jonathan Cameron wrote:
> On Wed, 8 May 2024 18:52:06 +0200
> Vasileios Amoiridis <vassilisamir@...il.com> wrote:
>
> > Add extra IIO_CHAN_INFO_SCALE and IIO_CHAN_INFO_RAW channels in order
> > to be able to calculate the processed value with standard userspace
> > IIO tools. Can be used for triggered buffers as well.
> >
> > Even though it is not a good design choice to have SCALE, RAW and
> > PROCESSED together, the PROCESSED channel is kept for ABI compatibility.
> >
> > While at it, separate BMPxxx and BMExxx device channels since BME
> > supports also humidity measurements.
> >
> > Signed-off-by: Vasileios Amoiridis <vassilisamir@...il.com>
> num channels is now ARRAY_SIZE(xxx) for all of these rather than
> the previous trick of using the same array and different numbers of channels.
>
> As such I think you can just replace the 2, 3 with ARRAY_SIZE(bmp280_channels)
> and ARRAY_SIZE(bme280_channels) which will give more obviously correct
> and maintainable code.
>
> Jonathan
>
Hi Jonathan!
Indeed, this is a very good addition!!!
Cheers,
Vasilis
>
> > ---
> > drivers/iio/pressure/bmp280-core.c | 86 +++++++++++++++++++++++++++---
> > 1 file changed, 78 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
> > index 70ce37370ac6..3f8144a0355b 100644
> > --- a/drivers/iio/pressure/bmp280-core.c
> > +++ b/drivers/iio/pressure/bmp280-core.c
> > @@ -137,17 +137,45 @@ enum {
> > static const struct iio_chan_spec bmp280_channels[] = {
> > {
> > .type = IIO_PRESSURE,
> > + /* PROCESSED maintained for ABI backwards compatibility */
> > .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > + BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > },
> > {
> > .type = IIO_TEMP,
> > + /* PROCESSED maintained for ABI backwards compatibility */
> > .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > + BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > + },
> > +};
> > +
> > +static const struct iio_chan_spec bme280_channels[] = {
> > + {
> > + .type = IIO_PRESSURE,
> > + /* PROCESSED maintained for ABI backwards compatibility */
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > + BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > + },
> > + {
> > + .type = IIO_TEMP,
> > + /* PROCESSED maintained for ABI backwards compatibility */
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > + BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > },
> > {
> > .type = IIO_HUMIDITYRELATIVE,
> > + /* PROCESSED maintained for ABI backwards compatibility */
> > .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > + BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > },
> > };
> > @@ -155,21 +183,20 @@ static const struct iio_chan_spec bmp280_channels[] = {
> > static const struct iio_chan_spec bmp380_channels[] = {
> > {
> > .type = IIO_PRESSURE,
> > + /* PROCESSED maintained for ABI backwards compatibility */
> > .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > + BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
> > },
> > {
> > .type = IIO_TEMP,
> > + /* PROCESSED maintained for ABI backwards compatibility */
> > .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > - BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > - BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
> > - },
> > - {
> > - .type = IIO_HUMIDITYRELATIVE,
> > - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > + BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
> > @@ -537,6 +564,49 @@ static int bmp280_read_raw_impl(struct iio_dev *indio_dev,
> > default:
> > return -EINVAL;
> > }
> > + case IIO_CHAN_INFO_RAW:
> > + switch (chan->type) {
> > + case IIO_HUMIDITYRELATIVE:
> > + ret = data->chip_info->read_humid(data, &chan_value);
> > + if (ret)
> > + return ret;
> > +
> > + *val = chan_value;
> > + return IIO_VAL_INT;
> > + case IIO_PRESSURE:
> > + ret = data->chip_info->read_press(data, &chan_value);
> > + if (ret)
> > + return ret;
> > +
> > + *val = chan_value;
> > + return IIO_VAL_INT;
> > + case IIO_TEMP:
> > + ret = data->chip_info->read_temp(data, &chan_value);
> > + if (ret)
> > + return ret;
> > +
> > + *val = chan_value;
> > + return IIO_VAL_INT;
> > + default:
> > + return -EINVAL;
> > + }
> > + case IIO_CHAN_INFO_SCALE:
> > + switch (chan->type) {
> > + case IIO_HUMIDITYRELATIVE:
> > + *val = data->chip_info->humid_coeffs[0];
> > + *val2 = data->chip_info->humid_coeffs[1];
> > + return data->chip_info->humid_coeffs_type;
> > + case IIO_PRESSURE:
> > + *val = data->chip_info->press_coeffs[0];
> > + *val2 = data->chip_info->press_coeffs[1];
> > + return data->chip_info->press_coeffs_type;
> > + case IIO_TEMP:
> > + *val = data->chip_info->temp_coeffs[0];
> > + *val2 = data->chip_info->temp_coeffs[1];
> > + return data->chip_info->temp_coeffs_type;
> > + default:
> > + return -EINVAL;
> > + }
> > case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> > switch (chan->type) {
> > case IIO_HUMIDITYRELATIVE:
> > @@ -903,7 +973,7 @@ const struct bmp280_chip_info bme280_chip_info = {
> > .num_chip_id = ARRAY_SIZE(bme280_chip_ids),
> > .regmap_config = &bmp280_regmap_config,
> > .start_up_time = 2000,
> > - .channels = bmp280_channels,
> > + .channels = bme280_channels,
> > .num_channels = 3,
> >
> > .oversampling_temp_avail = bmp280_oversampling_avail,
>
Powered by blists - more mailing lists