| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<PH0PR18MB4474E1287863A4E773861505DEE22@PH0PR18MB4474.namprd18.prod.outlook.com>
Date: Mon, 13 May 2024 10:20:17 +0000
From: Hariprasad Kelam <hkelam@...vell.com>
To: Romain Gantois <romain.gantois@...tlin.com>,
"David S. Miller"
<davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
<kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Geert Uytterhoeven
<geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Alexandre
Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Russell King
<linux@...linux.org.uk>,
Clément Léger
<clement.leger@...tlin.com>,
Serge Semin <fancer.lancer@...il.com>
CC: Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
"netdev@...r.kernel.org"
<netdev@...r.kernel.org>,
"devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>,
"linux-renesas-soc@...r.kernel.org"
<linux-renesas-soc@...r.kernel.org>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"Russell King (Oracle)"
<rmk+kernel@...linux.org.uk>
Subject: [PATCH net-next v7 3/7] net: stmmac: Make stmmac_xpcs_setup() generic
to all PCS devices
> From: Serge Semin <fancer.lancer@...il.com>
>
> A pcs_init() callback will be introduced to stmmac in a future patch. This new
> function will be called during the hardware initialization phase.
> Instead of separately initializing XPCS and PCS components, let's group all
> PCS-related hardware initialization logic in the current
> stmmac_xpcs_setup() function.
>
> Rename stmmac_xpcs_setup() to stmmac_pcs_setup() and move the
> conditional call to stmmac_xpcs_setup() inside the function itself.
>
> Signed-off-by: Serge Semin <fancer.lancer@...il.com>
> Co-developed-by: Romain Gantois <romain.gantois@...tlin.com>
> Signed-off-by: Romain Gantois <romain.gantois@...tlin.com>
> Reviewed-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +-
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 +++-----
> drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 30 ++++++++++++++-
> --------
> 3 files changed, 23 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> index badfe686a5702..ed38099ca7406 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> @@ -360,7 +360,7 @@ enum stmmac_state {
> int stmmac_mdio_unregister(struct net_device *ndev); int
> stmmac_mdio_register(struct net_device *ndev); int
> stmmac_mdio_reset(struct mii_bus *mii); -int stmmac_xpcs_setup(struct
> mii_bus *mii);
> +int stmmac_pcs_setup(struct net_device *ndev);
> void stmmac_pcs_clean(struct net_device *ndev); void
> stmmac_set_ethtool_ops(struct net_device *netdev);
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 0ac99c132733d..ef285b3c56ab9 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -7754,11 +7754,9 @@ int stmmac_dvr_probe(struct device *device,
> if (priv->plat->speed_mode_2500)
> priv->plat->speed_mode_2500(ndev, priv->plat->bsp_priv);
>
> - if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data-
> >has_xpcs) {
> - ret = stmmac_xpcs_setup(priv->mii);
> - if (ret)
> - goto error_xpcs_setup;
> - }
> + ret = stmmac_pcs_setup(ndev);
> + if (ret)
> + goto error_pcs_setup;
>
> ret = stmmac_phy_setup(priv);
> if (ret) {
> @@ -7791,7 +7789,7 @@ int stmmac_dvr_probe(struct device *device,
> phylink_destroy(priv->phylink);
> error_phy_setup:
> stmmac_pcs_clean(ndev);
> -error_xpcs_setup:
> +error_pcs_setup:
> if (priv->hw->pcs != STMMAC_PCS_TBI &&
> priv->hw->pcs != STMMAC_PCS_RTBI)
> stmmac_mdio_unregister(ndev);
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index 73ba9901a4439..54708440e27b8 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -495,31 +495,37 @@ int stmmac_mdio_reset(struct mii_bus *bus)
> return 0;
> }
>
> -int stmmac_xpcs_setup(struct mii_bus *bus)
> +int stmmac_pcs_setup(struct net_device *ndev)
> {
> - struct net_device *ndev = bus->priv;
> + struct dw_xpcs *xpcs = NULL;
> struct stmmac_priv *priv;
> - struct dw_xpcs *xpcs;
> + int ret = -ENODEV;
> int mode, addr;
>
> priv = netdev_priv(ndev);
> mode = priv->plat->phy_interface;
>
> - /* Try to probe the XPCS by scanning all addresses. */
> - for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
> - xpcs = xpcs_create_mdiodev(bus, addr, mode);
> - if (IS_ERR(xpcs))
> - continue;
> + if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data-
> >has_xpcs) {
> + /* Try to probe the XPCS by scanning all addresses */
> + for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
> + xpcs = xpcs_create_mdiodev(priv->mii, addr, mode);
> + if (IS_ERR(xpcs))
> + continue;
>
> - priv->hw->xpcs = xpcs;
> - break;
> + ret = 0;
> + break;
> + }
> + } else {
> + return 0;
> }
>
> - if (!priv->hw->xpcs) {
> + if (ret) {
> dev_warn(priv->device, "No xPCS found\n");
> - return -ENODEV;
> + return ret;
> }
>
> + priv->hw->xpcs = xpcs;
> +
> return 0;
> }
>
>
> --
> 2.44.0
>
Reviewed-by: Hariprasad Kelam <hkelam@...vell.com>
Powered by blists - more mailing lists