Message-Id: <20240514105822.99986-1-ivitro@gmail.com>
Date: Tue, 14 May 2024 11:58:22 +0100
From: Vitor Soares <ivitro@...il.com>
To: Marc Kleine-Budde <mkl@...gutronix.de>,
	Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
	Thomas Kopp <thomas.kopp@...rochip.com>,
	Vincent Mailhol <mailhol.vincent@...adoo.fr>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>
Cc: Vitor Soares <vitor.soares@...adex.com>,
	linux-can@...r.kernel.org,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	ivitro@...il.com,
	stable@...r.kernel.org
Subject: [PATCH v5] can: mcp251xfd: fix infinite loop when xmit fails

From: Vitor Soares <vitor.soares@...adex.com>

When the mcp251xfd_start_xmit() function fails, the driver stops
processing messages, and the interrupt routine does not return,
running indefinitely even after killing the running application.

Error messages:
[  441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16
[  441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3).
.. and repeat forever.

The issue can be triggered when multiple devices share the same
SPI interface. And there is concurrent access to the bus.

The problem occurs because tx_ring->head increments even if
mcp251xfd_start_xmit() fails. Consequently, the driver skips one
TX package while still expecting a response in
mcp251xfd_handle_tefif_one().

This patch resolves the issue by starting a workqueue to write
the tx obj synchronously if err = -EBUSY. In case of another error,
it decrements tx_ring->head, removes skb from the echo stack, and
drops the message.

Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Cc: stable@...r.kernel.org
Signed-off-by: Vitor Soares <vitor.soares@...adex.com>
---

V4->V5:
  - Start a workqueue to write tx obj with spi_sync() when spi_async() == -EBUSY.

V3->V4:
  - Leave can_put_echo_skb() and stop the queue if needed, before mcp251xfd_tx_obj_write().
  - Re-sync head and remove echo skb if mcp251xfd_tx_obj_write() fails.
  - Revert -> return NETDEV_TX_BUSY if mcp251xfd_tx_obj_write() == -EBUSY.

V2->V3:
  - Add tx_dropped stats.
  - netdev_sent_queue() only if can_put_echo_skb() succeed.

V1->V2:
  - Return NETDEV_TX_BUSY if mcp251xfd_tx_obj_write() == -EBUSY.
  - Rework the commit message to address the change above.
  - Change can_put_echo_skb() to be called after mcp251xfd_tx_obj_write() succeed.
    Otherwise, we get Kernel NULL pointer dereference error.

 .../net/can/spi/mcp251xfd/mcp251xfd-core.c    | 13 ++++-
 drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c  | 51 ++++++++++++++++---
 drivers/net/can/spi/mcp251xfd/mcp251xfd.h     |  5 ++
 3 files changed, 60 insertions(+), 9 deletions(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 1d9057dc44f2..6cca853f2b1e 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2141,15 +2141,25 @@ static int mcp251xfd_probe(struct spi_device *spi)
 	if (err)
 		goto out_free_candev;
 
+	priv->tx_work_obj = NULL;
+	priv->wq = alloc_workqueue("mcp251xfd_wq", WQ_FREEZABLE, 0);
+	if (!priv->wq) {
+		err = -ENOMEM;
+		goto out_can_rx_offload_del;
+	}
+	INIT_WORK(&priv->tx_work, mcp251xfd_tx_obj_write_sync);
+
 	err = mcp251xfd_register(priv);
 	if (err) {
 		dev_err_probe(&spi->dev, err, "Failed to detect %s.\n",
 			      mcp251xfd_get_model_str(priv));
-		goto out_can_rx_offload_del;
+		goto out_can_free_wq;
 	}
 
 	return 0;
 
+ out_can_free_wq:
+	destroy_workqueue(priv->wq);
  out_can_rx_offload_del:
 	can_rx_offload_del(&priv->offload);
  out_free_candev:
@@ -2165,6 +2175,7 @@ static void mcp251xfd_remove(struct spi_device *spi)
 	struct mcp251xfd_priv *priv = spi_get_drvdata(spi);
 	struct net_device *ndev = priv->ndev;
 
+	destroy_workqueue(priv->wq);
 	can_rx_offload_del(&priv->offload);
 	mcp251xfd_unregister(priv);
 	spi->max_speed_hz = priv->spi_max_speed_hz_orig;
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
index 160528d3cc26..1e7ddf316643 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
@@ -131,6 +131,41 @@ mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv,
 	tx_obj->xfer[0].len = len;
 }
 
+static void mcp251xfd_tx_failure_drop(const struct mcp251xfd_priv *priv,
+				      struct mcp251xfd_tx_ring *tx_ring,
+				      int err)
+{
+	struct net_device *ndev = priv->ndev;
+	struct net_device_stats *stats = &ndev->stats;
+	unsigned int frame_len = 0;
+	u8 tx_head;
+
+	tx_ring->head--;
+	stats->tx_dropped++;
+	tx_head = mcp251xfd_get_tx_head(tx_ring);
+	can_free_echo_skb(ndev, tx_head, &frame_len);
+	netdev_completed_queue(ndev, 1, frame_len);
+	netif_wake_queue(ndev);
+
+	if (net_ratelimit())
+		netdev_err(priv->ndev, "ERROR in %s: %d\n", __func__, err);
+}
+
+void mcp251xfd_tx_obj_write_sync(struct work_struct *ws)
+{
+	struct mcp251xfd_priv *priv = container_of(ws, struct mcp251xfd_priv,
+						   tx_work);
+	struct mcp251xfd_tx_obj *tx_obj = priv->tx_work_obj;
+	struct mcp251xfd_tx_ring *tx_ring = priv->tx;
+	int err;
+
+	err = spi_sync(priv->spi, &tx_obj->msg);
+	if (err)
+		mcp251xfd_tx_failure_drop(priv, tx_ring, err);
+
+	priv->tx_work_obj = NULL;
+}
+
 static int mcp251xfd_tx_obj_write(const struct mcp251xfd_priv *priv,
 				  struct mcp251xfd_tx_obj *tx_obj)
 {
@@ -175,7 +210,7 @@ netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb,
 	if (can_dev_dropped_skb(ndev, skb))
 		return NETDEV_TX_OK;
 
-	if (mcp251xfd_tx_busy(priv, tx_ring))
+	if (mcp251xfd_tx_busy(priv, tx_ring) || priv->tx_work_obj)
 		return NETDEV_TX_BUSY;
 
 	tx_obj = mcp251xfd_get_tx_obj_next(tx_ring);
@@ -193,13 +228,13 @@ netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb,
 		netdev_sent_queue(priv->ndev, frame_len);
 
 	err = mcp251xfd_tx_obj_write(priv, tx_obj);
-	if (err)
-		goto out_err;
-
-	return NETDEV_TX_OK;
-
- out_err:
-	netdev_err(priv->ndev, "ERROR in %s: %d\n", __func__, err);
+	if (err == -EBUSY) {
+		priv->tx_work_obj = tx_obj;
+		netif_stop_queue(ndev);
+		queue_work(priv->wq, &priv->tx_work);
+	} else if (err) {
+		mcp251xfd_tx_failure_drop(priv, tx_ring, err);
+	}
 
 	return NETDEV_TX_OK;
 }
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
index 24510b3b8020..4e27a33f4030 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
@@ -633,6 +633,10 @@ struct mcp251xfd_priv {
 	struct mcp251xfd_rx_ring *rx[MCP251XFD_FIFO_RX_NUM];
 	struct mcp251xfd_tx_ring tx[MCP251XFD_FIFO_TX_NUM];
 
+	struct workqueue_struct *wq;
+	struct work_struct tx_work;
+	struct mcp251xfd_tx_obj *tx_work_obj;
+
 	DECLARE_BITMAP(flags, __MCP251XFD_FLAGS_SIZE__);
 
 	u8 rx_ring_num;
@@ -952,6 +956,7 @@ void mcp251xfd_skb_set_timestamp(const struct mcp251xfd_priv *priv,
 void mcp251xfd_timestamp_init(struct mcp251xfd_priv *priv);
 void mcp251xfd_timestamp_stop(struct mcp251xfd_priv *priv);
 
+void mcp251xfd_tx_obj_write_sync(struct work_struct *ws);
 netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb,
 				 struct net_device *ndev);
 
-- 
2.34.1

Powered by blists - more mailing lists