lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 13 May 2024 19:01:30 -0700
From: "Tantilov, Emil S" <emil.s.tantilov@...el.com>
To: Alexander Lobakin <aleksander.lobakin@...el.com>,
	<intel-wired-lan@...ts.osuosl.org>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>, Eric Dumazet
	<edumazet@...gle.com>, Tony Nguyen <anthony.l.nguyen@...el.com>,
	<nex.sw.ncis.osdt.itp.upstreaming@...el.com>, Jakub Kicinski
	<kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, "David S. Miller"
	<davem@...emloft.net>
Subject: Re: [Intel-wired-lan] [PATCH RFC iwl-next 07/12] idpf: compile
 singleq code only under default-n CONFIG_IDPF_SINGLEQ

On 5/10/2024 8:26 AM, Alexander Lobakin wrote:
> Currently, there's no HW supporting idpf in the singleq model. Still,
> this dead code is supported by the driver and often times add hotpath
The driver supports the HW in single queue mode (not the other way 
around), so I would like to point out that all current HW on which idpf 
can load supports this model.

> branches and redundant cacheline accesses.
> While it can't currently be removed, add CONFIG_IDPF_SINGLEQ and build
> the singleq code only when it's enabled manually. This corresponds to
> -10 Kb of object code size and a good bunch of hotpath checks.
> idpf_is_queue_model_split() works as a gate and compiles out to `true`
> when the config option is disabled.
Compiling singleq out does introduce an issue for the users that would 
end up without a netdev if the driver is loaded on a setup where the 
Control Plane is configured for singlq mode. In that scenario the user 
will have to recompile the driver/kernel in order to load the driver 
successfully.

> 
> Signed-off-by: Alexander Lobakin <aleksander.lobakin@...el.com>
> ---
>   drivers/net/ethernet/intel/Kconfig            | 13 +---------
>   drivers/net/ethernet/intel/idpf/Kconfig       | 26 +++++++++++++++++++
>   drivers/net/ethernet/intel/idpf/Makefile      |  3 ++-
>   drivers/net/ethernet/intel/idpf/idpf.h        |  3 ++-
>   drivers/net/ethernet/intel/idpf/idpf_txrx.c   |  2 +-
>   .../net/ethernet/intel/idpf/idpf_virtchnl.c   | 15 ++++++++---
>   6 files changed, 43 insertions(+), 19 deletions(-)
>   create mode 100644 drivers/net/ethernet/intel/idpf/Kconfig
> 
> diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
> index e0287fbd501d..0375c7448a57 100644
> --- a/drivers/net/ethernet/intel/Kconfig
> +++ b/drivers/net/ethernet/intel/Kconfig
> @@ -384,17 +384,6 @@ config IGC_LEDS
>   	  Optional support for controlling the NIC LED's with the netdev
>   	  LED trigger.
>   
> -config IDPF
> -	tristate "Intel(R) Infrastructure Data Path Function Support"
> -	depends on PCI_MSI
> -	select DIMLIB
> -	select PAGE_POOL
> -	select PAGE_POOL_STATS
> -	help
> -	  This driver supports Intel(R) Infrastructure Data Path Function
> -	  devices.
> -
> -	  To compile this driver as a module, choose M here. The module
> -	  will be called idpf.
> +source "drivers/net/ethernet/intel/idpf/Kconfig"
>   
>   endif # NET_VENDOR_INTEL
> diff --git a/drivers/net/ethernet/intel/idpf/Kconfig b/drivers/net/ethernet/intel/idpf/Kconfig
> new file mode 100644
> index 000000000000..bee83a40f218
> --- /dev/null
> +++ b/drivers/net/ethernet/intel/idpf/Kconfig
> @@ -0,0 +1,26 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +# Copyright (C) 2024 Intel Corporation
> +
> +config IDPF
> +	tristate "Intel(R) Infrastructure Data Path Function Support"
> +	depends on PCI_MSI
> +	select DIMLIB
> +	select PAGE_POOL
> +	select PAGE_POOL_STATS
> +	help
> +	  This driver supports Intel(R) Infrastructure Data Path Function
> +	  devices.
> +
> +	  To compile this driver as a module, choose M here. The module
> +	  will be called idpf.
> +
> +if IDPF
> +
> +config IDPF_SINGLEQ
> +	bool "idpf singleq support"
> +	help
> +	  This option enables support for legacy single Rx/Tx queues w/no
> +	  completion and fill queues. Only enable if you have such hardware
This description is not accurate - all HW supports single queue. The 
configuration is done by the Control Plane. Furthermore, without access 
to the Control Plane config, there is no way for the user to know what 
mode is enabled.

Thanks,
Emil

> +	  as it increases the driver size and adds runtme checks on hotpath.
> +
> +endif # IDPF
> diff --git a/drivers/net/ethernet/intel/idpf/Makefile b/drivers/net/ethernet/intel/idpf/Makefile
> index 6844ead2f3ac..2ce01a0b5898 100644
> --- a/drivers/net/ethernet/intel/idpf/Makefile
> +++ b/drivers/net/ethernet/intel/idpf/Makefile
> @@ -12,7 +12,8 @@ idpf-y := \
>   	idpf_ethtool.o		\
>   	idpf_lib.o		\
>   	idpf_main.o		\
> -	idpf_singleq_txrx.o	\
>   	idpf_txrx.o		\
>   	idpf_virtchnl.o 	\
>   	idpf_vf_dev.o
> +
> +idpf-$(CONFIG_IDPF_SINGLEQ)	+= idpf_singleq_txrx.o
> diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h
> index f9e43d171f17..5d9529f5b41b 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf.h
> +++ b/drivers/net/ethernet/intel/idpf/idpf.h
> @@ -599,7 +599,8 @@ struct idpf_adapter {
>    */
>   static inline int idpf_is_queue_model_split(u16 q_model)
>   {
> -	return q_model == VIRTCHNL2_QUEUE_MODEL_SPLIT;
> +	return !IS_ENABLED(CONFIG_IDPF_SINGLEQ) ||
> +	       q_model == VIRTCHNL2_QUEUE_MODEL_SPLIT;
>   }
>   
>   #define idpf_is_cap_ena(adapter, field, flag) \
> diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
> index 4aa5ee781bd7..2bc1a5a0b50f 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c
> +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
> @@ -1306,7 +1306,7 @@ static void idpf_vport_calc_numq_per_grp(struct idpf_vport *vport,
>   static void idpf_rxq_set_descids(const struct idpf_vport *vport,
>   				 struct idpf_rx_queue *q)
>   {
> -	if (vport->rxq_model == VIRTCHNL2_QUEUE_MODEL_SPLIT) {
> +	if (idpf_is_queue_model_split(vport->rxq_model)) {
>   		q->rxdids = VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M;
>   	} else {
>   		if (vport->base_rxd)
> diff --git a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
> index 44602b87cd41..d1705fcb701a 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
> +++ b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
> @@ -1256,12 +1256,12 @@ int idpf_send_create_vport_msg(struct idpf_adapter *adapter,
>   	vport_msg->vport_type = cpu_to_le16(VIRTCHNL2_VPORT_TYPE_DEFAULT);
>   	vport_msg->vport_index = cpu_to_le16(idx);
>   
> -	if (adapter->req_tx_splitq)
> +	if (adapter->req_tx_splitq || !IS_ENABLED(CONFIG_IDPF_SINGLEQ))
>   		vport_msg->txq_model = cpu_to_le16(VIRTCHNL2_QUEUE_MODEL_SPLIT);
>   	else
>   		vport_msg->txq_model = cpu_to_le16(VIRTCHNL2_QUEUE_MODEL_SINGLE);
>   
> -	if (adapter->req_rx_splitq)
> +	if (adapter->req_rx_splitq || !IS_ENABLED(CONFIG_IDPF_SINGLEQ))
>   		vport_msg->rxq_model = cpu_to_le16(VIRTCHNL2_QUEUE_MODEL_SPLIT);
>   	else
>   		vport_msg->rxq_model = cpu_to_le16(VIRTCHNL2_QUEUE_MODEL_SINGLE);
> @@ -1323,10 +1323,17 @@ int idpf_check_supported_desc_ids(struct idpf_vport *vport)
>   
>   	vport_msg = adapter->vport_params_recvd[vport->idx];
>   
> +	if (!IS_ENABLED(CONFIG_IDPF_SINGLEQ) &&
> +	    (vport_msg->rxq_model == VIRTCHNL2_QUEUE_MODEL_SINGLE ||
> +	     vport_msg->txq_model == VIRTCHNL2_QUEUE_MODEL_SINGLE)) {
> +		dev_err(&adapter->pdev->dev, "singleq mode requested, but not compiled-in\n");
> +		return -EOPNOTSUPP;
> +	}
> +
>   	rx_desc_ids = le64_to_cpu(vport_msg->rx_desc_ids);
>   	tx_desc_ids = le64_to_cpu(vport_msg->tx_desc_ids);
>   
> -	if (vport->rxq_model == VIRTCHNL2_QUEUE_MODEL_SPLIT) {
> +	if (idpf_is_queue_model_split(vport->rxq_model)) {
>   		if (!(rx_desc_ids & VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M)) {
>   			dev_info(&adapter->pdev->dev, "Minimum RX descriptor support not provided, using the default\n");
>   			vport_msg->rx_desc_ids = cpu_to_le64(VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M);
> @@ -1336,7 +1343,7 @@ int idpf_check_supported_desc_ids(struct idpf_vport *vport)
>   			vport->base_rxd = true;
>   	}
>   
> -	if (vport->txq_model != VIRTCHNL2_QUEUE_MODEL_SPLIT)
> +	if (!idpf_is_queue_model_split(vport->txq_model))
>   		return 0;
>   
>   	if ((tx_desc_ids & MIN_SUPPORT_TXDID) != MIN_SUPPORT_TXDID) {

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ