| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b34d2038bb6af20946d7ad4cb456cbca0a896cff.camel@HansenPartnership.com>
Date: Tue, 14 May 2024 12:06:41 -0600
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>, Linus Torvalds
<torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>, linux-kernel
<linux-kernel@...r.kernel.org>
Subject: [GIT PULL] SCSI updates for the 6.9+ merge window
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The
major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification.
Note we have a fairly obvious conflict with the block tree: the SCSI
tree is based on a version where blk_queue_required_elevator_features()
still existed (removed in block) and our tree removes an adjacent
function, blk_queue_can_use_dma_map_merging(), leading git to flag the
adjacent removals as a conflict. The fixup is fairly simple (just
remove everything).
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Alice Chao (1):
scsi: ufs: mediatek: Support rtff in PM flow
Andrew Donnellan (1):
scsi: MAINTAINERS: Make cxlflash obsolete
Andrew Halaney (11):
scsi: ufs: core: Remove unnecessary wmb() prior to writing run/stop regs
scsi: ufs: core: Remove unnecessary wmb() after ringing doorbell
scsi: ufs: core: Perform read back after disabling UIC_COMMAND_COMPL
scsi: ufs: core: Perform read back after disabling interrupts
scsi: ufs: core: Perform read back after writing UTP_TASK_REQ_LIST_BASE_H
scsi: ufs: cdns-pltfrm: Perform read back after writing HCLKDIV
scsi: ufs: qcom: Perform read back after writing CGC enable
scsi: ufs: qcom: Perform read back after writing unipro mode
scsi: ufs: qcom: Remove unnecessary mb() after writing testbus config
scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US
scsi: ufs: qcom: Perform read back after writing reset bit
Andy Shevchenko (1):
scsi: core: Don't use "proxy" headers
Arnd Bergmann (1):
scsi: cxlflash: Fix function pointer cast warnings
Avri Altman (5):
scsi: ufs: Remove support for old UFSHCI versions
scsi: ufs: Reuse compose_devman_upiu
scsi: ufs: Reuse compose_dev_cmd
scsi: ufs: core: Reuse exec_dev_cmd
scsi: ufs: core: Reuse device management locking code
Bart Van Assche (3):
scsi: ufs: core: mcq: Fix ufshcd_mcq_sqe_search()
scsi: core: Improve the code for showing commands in debugfs
scsi: core: Introduce scsi_cmd_list_info()
Bikash Hazarika (1):
scsi: qla2xxx: Update manufacturer detail
Bui Quang Minh (2):
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
Christoph Hellwig (24):
scsi: block: Remove now unused queue limits helpers
scsi: uas: Switch to using ->device_configure to configure queue limits
scsi: mpi3mr: Switch to using ->device_configure
scsi: mpi3mr: Switch to using ->device_configure
scsi: libata: Switch to using ->device_configure
scsi: pata_macio: Switch to using ->device_configure
scsi: sata_nv: Switch to using ->device_configure
scsi: usb-storage: Switch to using ->device_configure
scsi: pmcraid: Switch to using ->device_configure
scsi: ipr: Switch to using ->device_configure
scsi: hptiop: Switch to using ->device_configure
scsi: sbp2: Switch to using ->device_configure
scsi: mpt3sas: Switch to using ->device_configure
scsi: megaraid_sas: Switch to using ->device_configure
scsi: core: Add a device_configure method to the host template
scsi: core: Use the atomic queue limits API in scsi_add_lun()
scsi: ufs: ufs-exynos: Move setting the the DMA alignment to the init method
scsi: core: Add a dma_alignment field to the host and host template
scsi: core: Add a no_highmem flag to struct Scsi_Host
scsi: scsi_transport_fc: Add a max_bsg_segments field to struct fc_function_template
scsi: core: Initialize scsi midlayer limits before allocating the queue
scsi: mpi3mr: Pass queue_limits to bsg_setup_queue()
scsi: bsg: Pass queue_limits to bsg_setup_queue()
scsi: block: Add a helper to cancel atomic queue limit updates
Colin Ian King (3):
scsi: bnx2fc: Remove redundant assignment to variable 'i'
scsi: FlashPoint: Remove redundant assignment to pointer currTar_Info
scsi: target: iscsi: Remove unused variable xfer_len
Damien Le Moal (1):
scsi: libsas: Fix declaration of ncq priority attributes
Dmitry Baryshkov (1):
scsi: ufs: qcom: Provide default cycles_in_1us value
Dr. David Alan Gilbert (2):
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
Himanshu Madhani (1):
scsi: qla2xxx: Fix debugfs output for fw_resource_count
Igor Pylypiv (7):
scsi: isci: Add libsas SATA sysfs attributes group
scsi: aic94xx: Add libsas SATA sysfs attributes group
scsi: hisi_sas: Add libsas SATA sysfs attributes group
scsi: mvsas: Add libsas SATA sysfs attributes group
scsi: pm80xx: Add libsas SATA sysfs attributes group
scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices
scsi: ata: libata-sata: Factor out NCQ Priority configuration helpers
John Garry (6):
scsi: isci: Use LIBSAS_SHT_BASE
scsi: mvsas: Use LIBSAS_SHT_BASE
scsi: aic94xx: Use LIBSAS_SHT_BASE
scsi: hisi_sas: Use LIBSAS_SHT_BASE_NO_SLAVE_INIT
scsi: pm8001: Use LIBSAS_SHT_BASE
scsi: libsas: Add LIBSAS_SHT_BASE
John Meneghini (1):
scsi: qedf: Make qedf_execute_tmf() non-preemptible
Justin Stitt (7):
scsi: wd33c93: Replace deprecated strncpy() with strscpy()
scsi: smartpqi: Replace deprecated strncpy() with strscpy()
scsi: devinfo: Replace strncpy() and manual pad
scsi: qla4xxx: Replace deprecated strncpy() with strscpy()
scsi: qedf: Replace deprecated strncpy() with strscpy()
scsi: mpt3sas: Replace deprecated strncpy() with strscpy()
scsi: mpi3mr: Replace deprecated strncpy() with assignments
Justin Tee (20):
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: lpfc: Copyright updates for 14.4.0.1 patches
scsi: lpfc: Update lpfc version to 14.4.0.1
scsi: lpfc: Define types in a union for generic void *context3 ptr
scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
scsi: lpfc: Use a dedicated lock for ras_fwlog state
scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
scsi: lpfc: Remove unnecessary log message in queuecommand path
Krzysztof Kozlowski (9):
scsi: ufs: mediatek: Fix module autoloading
scsi: ufs: core: Drop driver owner initialization
scsi: st: Drop driver owner initialization
scsi: sr: Drop driver owner initialization
scsi: ses: Drop driver owner initialization
scsi: sd: Drop driver owner initialization
scsi: core: Store owner from modules with scsi_register_driver()
scsi: qla2xxx: Drop driver owner assignment
scsi: csiostor: Drop driver owner assignment
Li Zhijian (1):
scsi: snic: Convert sprintf() family to sysfs_emit() family
Manish Rangankar (1):
scsi: qedi: Fix crash while reading debugfs attribute
Manivannan Sadhasivam (1):
scsi: ufs: qcom: Add sanity checks for gear/lane values during ICC scaling
Muhammad Usama Anjum (2):
scsi: lpfc: Correct size for cmdwqe/rspwqe for memset()
scsi: lpfc: Correct size for wqe for memset()
Nilesh Javali (1):
scsi: qla2xxx: Update version to 10.02.09.200-k
Peter Griffin (6):
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
Peter Wang (4):
scsi: ufs: mediatek: Support mphy reset
scsi: ufs: mediatek: TX skew fix
scsi: ufs: mediatek: Fix vsx/vccqx control logic
scsi: ufs: core: Add config_scsi_dev vops comment
Po-Wen Kao (3):
scsi: ufs: mediatek: Rename host power control API
scsi: ufs: mediatek: UFS mtk sip command reconstruct
scsi: ufs: mediatek: Add UFS_MTK_CAP_DISABLE_MCQ
Prasad Pandit (3):
scsi: aic7xxx: Indent kconfig help text
scsi: qla2xxx: Indent help text
scsi: megaraid: Indent Kconfig option help text
Quinn Tran (6):
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Fix command flush on cable pull
scsi: qla2xxx: NVME|FCP prefer flag not being honored
scsi: qla2xxx: Split FCE|EFT trace control
scsi: qla2xxx: Fix N2N stuck connection
scsi: qla2xxx: Prevent command send on chip reset
Randy Dunlap (11):
scsi: mpi3mr: Fix some kernel-doc warnings in scsi_bsg_mpi3mr.h
scsi: ufs: bsg: Fix all kernel-doc warnings
scsi: libfc: Add some kernel-doc comments
scsi: scsi_transport_srp: Fix a couple of kernel-doc warnings
scsi: scsi_transport_fc: Add kernel-doc for function return
scsi: core: Add function return kernel-doc for 2 functions
scsi: libfcoe: Fix a slew of kernel-doc warnings
scsi: iser: Fix @read_stag kernel-doc warning
scsi: core: Add kernel-doc for scsi_msg_to_host_byte()
scsi: documentation: Clean up overview
scsi: documentation: Clean up scsi_mid_low_api.rst
Ranjan Kumar (7):
scsi: mpi3mr: Driver version update to 8.8.1.0.50
scsi: mpi3mr: Update MPI Headers to revision 31
scsi: mpi3mr: Debug ability improvements
scsi: mpi3mr: Set the WriteSame Divert Capability in the IOCInit MPI Request
scsi: mpi3mr: Clear ioctl blocking flag for an unresponsive controller
scsi: mpi3mr: Set MPI request flags appropriately
scsi: mpi3mr: Block devices are not removed even when VDs are offlined
Ricardo B. Marliere (5):
scsi: st: Make st_sysfs_class constant
scsi: ch: Make ch_sysfs_class constant
scsi: cxlflash: Make cxlflash_class constant
scsi: pmcraid: Make pmcraid_class constant
scsi: sg: Make sg_sysfs_class constant
Rohit Ner (1):
scsi: ufs: core: Fix MCQ MAC configuration
SEO HOYOUNG (1):
scsi: ufs: core: Changing the status to check inflight
Saurav Kashyap (3):
scsi: qla2xxx: Change debug message during driver unload
scsi: qla2xxx: Fix double free of fcport
scsi: qla2xxx: Fix double free of the ha->vp_map pointer
Tomas Henzl (1):
scsi: mpi3mr: Sanitise num_phys
Uwe Kleine-König (4):
scsi: mac_scsi: Mark driver struct with __refdata to prevent section mismatch
scsi: atari_scsi: Mark driver struct with __refdata to prevent section mismatch
scsi: a4000t: Mark driver struct with __refdata to prevent section mismatch
scsi: a3000: Mark driver struct with __refdata to prevent section mismatch
Will McVicker (1):
scsi: ufs: exynos: Support module autoloading
Xingui Yang (6):
scsi: libsas: Fix the failure of adding phy with zero-address to port
scsi: libsas: Set port when ex_phy is added or deleted
scsi: libsas: Move sas_add_parent_port() to sas_expander.c
scsi: libsas: Add helper for port add ex_phy
scsi: libsas: Fix disk not being scanned in after being removed
scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type()
Yuri Karpov (1):
scsi: hpsa: Fix allocation size for Scsi_Host private data
And the diffstat:
.../bindings/ufs/samsung,exynos-ufs.yaml | 38 ++-
Documentation/driver-api/scsi.rst | 15 +-
Documentation/scsi/scsi_mid_low_api.rst | 22 +-
MAINTAINERS | 3 +-
block/blk-settings.c | 245 --------------
block/bsg-lib.c | 6 +-
drivers/ata/ahci.h | 2 +-
drivers/ata/libata-sata.c | 171 +++++++---
drivers/ata/libata-scsi.c | 19 +-
drivers/ata/libata.h | 3 +-
drivers/ata/pata_macio.c | 11 +-
drivers/ata/sata_mv.c | 2 +-
drivers/ata/sata_nv.c | 24 +-
drivers/ata/sata_sil24.c | 2 +-
drivers/firewire/sbp2.c | 13 +-
drivers/message/fusion/mptfc.c | 1 +
drivers/message/fusion/mptsas.c | 1 +
drivers/message/fusion/mptscsih.c | 2 -
drivers/message/fusion/mptspi.c | 1 +
drivers/net/ethernet/qlogic/qed/qed_main.c | 2 +-
drivers/s390/block/dasd_eckd.c | 6 +-
drivers/scsi/FlashPoint.c | 1 -
drivers/scsi/Kconfig | 4 +-
drivers/scsi/a3000.c | 8 +-
drivers/scsi/a4000t.c | 8 +-
drivers/scsi/aha152x.c | 8 +-
drivers/scsi/aic7xxx/Kconfig.aic79xx | 75 ++---
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 97 +++---
drivers/scsi/aic94xx/aic94xx_init.c | 29 +-
drivers/scsi/atari_scsi.c | 8 +-
drivers/scsi/bfa/bfad_debugfs.c | 4 +-
drivers/scsi/bnx2fc/bnx2fc_tgt.c | 4 +-
drivers/scsi/ch.c | 20 +-
drivers/scsi/csiostor/csio_init.c | 3 -
drivers/scsi/cxlflash/lunmgt.c | 6 +-
drivers/scsi/cxlflash/main.c | 35 +-
drivers/scsi/cxlflash/superpipe.c | 40 ++-
drivers/scsi/cxlflash/superpipe.h | 11 +-
drivers/scsi/cxlflash/vlun.c | 9 +-
drivers/scsi/hisi_sas/hisi_sas.h | 3 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 7 +-
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 20 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 26 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 31 +-
drivers/scsi/hosts.c | 6 +
drivers/scsi/hpsa.c | 2 +-
drivers/scsi/hptiop.c | 8 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 5 +-
drivers/scsi/imm.c | 12 +-
drivers/scsi/ipr.c | 10 +-
drivers/scsi/isci/init.c | 29 +-
drivers/scsi/iscsi_tcp.c | 2 +-
drivers/scsi/libsas/sas_ata.c | 84 +++++
drivers/scsi/libsas/sas_expander.c | 89 +++--
drivers/scsi/libsas/sas_internal.h | 15 -
drivers/scsi/libsas/sas_scsi_host.c | 7 +-
drivers/scsi/lpfc/lpfc.h | 64 ++--
drivers/scsi/lpfc/lpfc_attr.c | 35 +-
drivers/scsi/lpfc/lpfc_bsg.c | 43 +--
drivers/scsi/lpfc/lpfc_ct.c | 24 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 12 +-
drivers/scsi/lpfc/lpfc_els.c | 88 ++---
drivers/scsi/lpfc/lpfc_hbadisc.c | 166 +++++----
drivers/scsi/lpfc/lpfc_hw4.h | 8 +
drivers/scsi/lpfc/lpfc_init.c | 132 ++++----
drivers/scsi/lpfc/lpfc_mbox.c | 30 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 75 +++--
drivers/scsi/lpfc/lpfc_nvme.c | 31 +-
drivers/scsi/lpfc/lpfc_nvmet.c | 11 +-
drivers/scsi/lpfc/lpfc_scsi.c | 94 +++---
drivers/scsi/lpfc/lpfc_scsi.h | 32 +-
drivers/scsi/lpfc/lpfc_sli.c | 315 +++++++++---------
drivers/scsi/lpfc/lpfc_sli.h | 30 +-
drivers/scsi/lpfc/lpfc_sli4.h | 7 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/lpfc/lpfc_vport.c | 10 +-
drivers/scsi/mac_scsi.c | 8 +-
drivers/scsi/megaraid/Kconfig.megaraid | 113 ++++---
drivers/scsi/megaraid/megaraid_sas.h | 2 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 29 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 3 +-
drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h | 3 +
drivers/scsi/mpi3mr/mpi/mpi30_image.h | 20 +-
drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 20 +-
drivers/scsi/mpi3mr/mpi/mpi30_transport.h | 2 +-
drivers/scsi/mpi3mr/mpi3mr.h | 15 +-
drivers/scsi/mpi3mr/mpi3mr_app.c | 33 +-
drivers/scsi/mpi3mr/mpi3mr_fw.c | 42 ++-
drivers/scsi/mpi3mr/mpi3mr_os.c | 86 ++---
drivers/scsi/mpi3mr/mpi3mr_transport.c | 10 +
drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 18 +-
drivers/scsi/mpt3sas/mpt3sas_transport.c | 18 +-
drivers/scsi/mvsas/mv_init.c | 26 +-
drivers/scsi/pm8001/pm8001_ctl.c | 5 +
drivers/scsi/pm8001/pm8001_init.c | 21 +-
drivers/scsi/pm8001/pm8001_sas.h | 1 +
drivers/scsi/pmcraid.c | 31 +-
drivers/scsi/ppa.c | 8 +-
drivers/scsi/qedf/qedf_debugfs.c | 2 +-
drivers/scsi/qedf/qedf_io.c | 6 +-
drivers/scsi/qedf/qedf_main.c | 2 +-
drivers/scsi/qedi/qedi_debugfs.c | 12 +-
drivers/scsi/qla2xxx/Kconfig | 42 +--
drivers/scsi/qla2xxx/qla_attr.c | 14 +-
drivers/scsi/qla2xxx/qla_def.h | 2 +-
drivers/scsi/qla2xxx/qla_dfs.c | 2 +-
drivers/scsi/qla2xxx/qla_gbl.h | 2 +-
drivers/scsi/qla2xxx/qla_init.c | 128 +++----
drivers/scsi/qla2xxx/qla_iocb.c | 68 ++--
drivers/scsi/qla2xxx/qla_mbx.c | 2 +-
drivers/scsi/qla2xxx/qla_os.c | 12 +-
drivers/scsi/qla2xxx/qla_target.c | 10 +
drivers/scsi/qla2xxx/qla_version.h | 4 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 17 +-
drivers/scsi/qla4xxx/ql4_os.c | 14 +-
drivers/scsi/scsi_debugfs.c | 56 ++--
drivers/scsi/scsi_devinfo.c | 18 +-
drivers/scsi/scsi_lib.c | 40 +--
drivers/scsi/scsi_scan.c | 74 +++--
drivers/scsi/scsi_sysfs.c | 5 +-
drivers/scsi/scsi_transport_fc.c | 15 +-
drivers/scsi/scsi_transport_iscsi.c | 7 +-
drivers/scsi/scsi_transport_sas.c | 4 +-
drivers/scsi/sd.c | 1 -
drivers/scsi/ses.c | 1 -
drivers/scsi/sg.c | 18 +-
drivers/scsi/smartpqi/smartpqi_init.c | 5 +-
drivers/scsi/snic/snic_attrs.c | 11 +-
drivers/scsi/sr.c | 1 -
drivers/scsi/st.c | 5 +-
drivers/scsi/wd33c93.c | 4 +-
drivers/staging/rts5208/rtsx.c | 24 +-
drivers/target/iscsi/iscsi_target_erl1.c | 3 +-
drivers/target/target_core_device.c | 1 -
drivers/ufs/core/ufs-mcq.c | 5 +-
drivers/ufs/core/ufs_bsg.c | 3 +-
drivers/ufs/core/ufshcd.c | 370 +++++----------------
drivers/ufs/host/cdns-pltfrm.c | 2 +-
drivers/ufs/host/ufs-exynos.c | 205 ++++++++++--
drivers/ufs/host/ufs-exynos.h | 24 +-
drivers/ufs/host/ufs-mediatek-sip.h | 94 ++++++
drivers/ufs/host/ufs-mediatek.c | 131 +++++++-
drivers/ufs/host/ufs-mediatek.h | 90 +----
drivers/ufs/host/ufs-qcom.c | 31 +-
drivers/ufs/host/ufs-qcom.h | 12 +-
drivers/usb/image/microtek.c | 8 +-
drivers/usb/storage/scsiglue.c | 57 ++--
drivers/usb/storage/uas.c | 29 +-
drivers/usb/storage/usb.c | 10 +
include/linux/blkdev.h | 26 +-
include/linux/bsg-lib.h | 3 +-
include/linux/libata.h | 16 +-
include/linux/mmc/host.h | 4 +-
include/scsi/iser.h | 2 +-
include/scsi/libfc.h | 18 +-
include/scsi/libfcoe.h | 25 +-
include/scsi/libsas.h | 32 +-
include/scsi/sas_ata.h | 6 +
include/scsi/scsi.h | 12 +-
include/scsi/scsi_cmnd.h | 2 +
include/scsi/scsi_driver.h | 4 +-
include/scsi/scsi_host.h | 9 +
include/scsi/scsi_transport.h | 2 +-
include/scsi/scsi_transport_fc.h | 6 +-
include/scsi/scsi_transport_srp.h | 4 +-
include/uapi/scsi/scsi_bsg_mpi3mr.h | 8 +-
include/uapi/scsi/scsi_bsg_ufs.h | 4 +-
include/ufs/ufshcd.h | 4 +-
include/ufs/ufshci.h | 13 +-
170 files changed, 2567 insertions(+), 2376 deletions(-)
create mode 100644 drivers/ufs/host/ufs-mediatek-sip.h
James
Powered by blists - more mailing lists