linux-kernel - [PATCH RESEND v5 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240515105446.3944629-1-sumit.garg@linaro.org>
Date: Wed, 15 May 2024 16:24:43 +0530
From: Sumit Garg <sumit.garg@...aro.org>
To: andersson@...nel.org,
	konrad.dybcio@...aro.org,
	linux-arm-msm@...r.kernel.org,
	devicetree@...r.kernel.org
Cc: robh+dt@...nel.org,
	krzysztof.kozlowski+dt@...aro.org,
	conor+dt@...nel.org,
	stephan@...hold.net,
	caleb.connolly@...aro.org,
	neil.armstrong@...aro.org,
	dmitry.baryshkov@...aro.org,
	laetitia.mariottini@...com,
	pascal.eberhard@...com,
	abdou.saker@...com,
	jimmy.lalande@...com,
	benjamin.missey@....se.com,
	daniel.thompson@...aro.org,
	linux-kernel@...r.kernel.org,
	Sumit Garg <sumit.garg@...aro.org>
Subject: [PATCH RESEND v5 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS

Add Schneider Electric HMIBSC board DTS. The HMIBSC board is an IIoT Edge
Box Core board based on the Qualcomm APQ8016E SoC. For more information
refer to the product page [1].

One of the major difference from db410c is serial port where HMIBSC board
uses UART1 as the debug console with a default RS232 mode (UART1 mode mux
configured via gpio99 and gpio100).

Support for Schneider Electric HMIBSC. Features:
- Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
- 1GiB RAM
- 8GiB eMMC, SD slot
- WiFi and Bluetooth
- 2x Host, 1x Device USB port
- HDMI
- Discrete TPM2 chip over SPI
- USB ethernet adaptors (soldered)

This series is a v2 since v1 of this DTS file has been reviewed on the
U-Boot mailing list [2].

Changes in v5:
- Addressed another nitpick from Stephen.
- Collected Stephen's review tag.
- Warnings reported by Rob's DT check bot aren't related to HMIBSC
  board DTS but rather they are due to msm8916.dtsi or extcon-usb-gpio.txt
  still not converted to YAML format.

Changes in v4:
- Dropped IRQ_TYPE_EDGE_FALLING for pm8916_resin given the expectations
  of Linux kernel driver. Instead depend on systemd workaround suggested
  by Caleb to get expected HMIBSC reset behaviour.
- Incorporated further DT coding style comments from Stephen.
- Warnings reported by Rob's DT check bot aren't related to HMIBSC
  board DTS but rather they are due to msm8916.dtsi or extcon-usb-gpio.txt
  still not converted to YAML format.

Changes in v3:
- Picked up tags.
- Fixed further DT schema warnings.
- Configure resin/power button interrupt as falling edge.
- Incorporate DTS coding style comments from Krzysztof and Konrad.

Changes in v2:
- Fix DT schema warnings.
- Incorporate suggestions from Stephan.
- Document UART1 mode GPIOs based mux.

[1] https://www.se.com/us/en/product/HMIBSCEA53D1L0T/iiot-edge-box-core-harmony-ipc-emmc-dc-linux-tpm/
[2] https://patchwork.ozlabs.org/project/uboot/patch/20240311111027.44577-6-sumit.garg@linaro.org/

Sumit Garg (3):
  dt-bindings: vendor-prefixes: Add Schneider Electric
  dt-bindings: arm: qcom: Add Schneider Electric HMIBSC board
  arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../dts/qcom/apq8016-schneider-hmibsc.dts     | 491 ++++++++++++++++++
 4 files changed, 495 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts

-- 
2.34.1