| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240517224323.10045-4-lsanche@lyndeno.ca>
Date: Fri, 17 May 2024 16:42:36 -0600
From: Lyndon Sanche <lsanche@...deno.ca>
To: lsanche@...deno.ca
Cc: mario.limonciello@....com,
pali@...nel.org,
W_Armin@....de,
srinivas.pandruvada@...ux.intel.com,
ilpo.jarvinen@...ux.intel.com,
lkp@...el.com,
hdegoede@...hat.com,
Yijun.Shen@...l.com,
Matthew Garrett <mjg59@...f.ucam.org>,
Vegard Nossum <vegard.nossum@...cle.com>,
Jonathan Corbet <corbet@....net>,
Heiner Kallweit <hkallweit1@...il.com>,
linux-kernel@...r.kernel.org,
platform-driver-x86@...r.kernel.org,
Dell.Client.Kernel@...l.com
Subject: [PATCH v7 3/3] platform/x86: dell-pc: Implement platform_profile
Some Dell laptops support configuration of preset fan modes through
smbios tables.
If the platform supports these fan modes, set up platform_profile to
change these modes. If not supported, skip enabling platform_profile.
Signed-off-by: Lyndon Sanche <lsanche@...deno.ca>
---
MAINTAINERS | 6 +
drivers/platform/x86/dell/Kconfig | 13 +
drivers/platform/x86/dell/Makefile | 1 +
drivers/platform/x86/dell/dell-pc.c | 310 +++++++++++++++++++
drivers/platform/x86/dell/dell-smbios-base.c | 1 +
drivers/platform/x86/dell/dell-smbios.h | 1 +
6 files changed, 332 insertions(+)
create mode 100644 drivers/platform/x86/dell/dell-pc.c
diff --git a/MAINTAINERS b/MAINTAINERS
index ebf03f5f0619..69c582b72a08 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5961,6 +5961,12 @@ F: Documentation/ABI/obsolete/procfs-i8k
F: drivers/hwmon/dell-smm-hwmon.c
F: include/uapi/linux/i8k.h
+DELL PC DRIVER
+M: Lyndon Sanche <lsanche@...deno.ca>
+L: platform-driver-x86@...r.kernel.org
+S: Maintained
+F: drivers/platform/x86/dell/dell-pc.c
+
DELL REMOTE BIOS UPDATE DRIVER
M: Stuart Hayes <stuart.w.hayes@...il.com>
L: platform-driver-x86@...r.kernel.org
diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
index bd9f445974cc..0732850a3dd6 100644
--- a/drivers/platform/x86/dell/Kconfig
+++ b/drivers/platform/x86/dell/Kconfig
@@ -91,6 +91,19 @@ config DELL_RBTN
To compile this driver as a module, choose M here: the module will
be called dell-rbtn.
+config DELL_PC
+ tristate "Dell PC Extras"
+ default m
+ depends on ACPI
+ depends on DMI
+ depends on DELL_SMBIOS
+ select ACPI_PLATFORM_PROFILE
+ help
+ This driver adds support for controlling the fan modes via platform_profile
+ on supported Dell systems regardless of formfactor.
+ Module will simply do nothing if thermal management commands are not
+ supported.
+
#
# The DELL_SMBIOS driver depends on ACPI_WMI and/or DCDBAS if those
# backends are selected. The "depends" line prevents a configuration
diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
index 1b8942426622..9b0094fafcce 100644
--- a/drivers/platform/x86/dell/Makefile
+++ b/drivers/platform/x86/dell/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_DCDBAS) += dcdbas.o
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_RBTN) += dell-rbtn.o
obj-$(CONFIG_DELL_RBU) += dell_rbu.o
+obj-$(CONFIG_DELL_PC) += dell-pc.o
obj-$(CONFIG_DELL_SMBIOS) += dell-smbios.o
dell-smbios-objs := dell-smbios-base.o
dell-smbios-$(CONFIG_DELL_SMBIOS_WMI) += dell-smbios-wmi.o
diff --git a/drivers/platform/x86/dell/dell-pc.c b/drivers/platform/x86/dell/dell-pc.c
new file mode 100644
index 000000000000..3dd762e39f45
--- /dev/null
+++ b/drivers/platform/x86/dell/dell-pc.c
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Dell laptop extras
+ *
+ * Copyright (c) Lyndon Sanche <lsanche@...deno.ca>
+ *
+ * Based on documentation in the libsmbios package:
+ * Copyright (C) 2005-2014 Dell Inc.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/dmi.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/platform_profile.h>
+#include <linux/slab.h>
+#include "dell-smbios.h"
+
+
+static const struct dmi_system_id dell_device_table[] __initconst = {
+ {
+ .ident = "Dell Inc.",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ },
+ },
+ {
+ .ident = "Dell Computer Corporation",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ },
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(dmi, dell_device_table);
+
+/* Derived from smbios-thermal-ctl
+ *
+ * cbClass 17
+ * cbSelect 19
+ * User Selectable Thermal Tables(USTT)
+ * cbArg1 determines the function to be performed
+ * cbArg1 0x0 = Get Thermal Information
+ * cbRES1 Standard return codes (0, -1, -2)
+ * cbRES2, byte 0 Bitmap of supported thermal modes. A mode is supported if
+ * its bit is set to 1
+ * Bit 0 Balanced
+ * Bit 1 Cool Bottom
+ * Bit 2 Quiet
+ * Bit 3 Performance
+ * cbRES2, byte 1 Bitmap of supported Active Acoustic Controller (AAC) modes.
+ * Each mode corresponds to the supported thermal modes in
+ * byte 0. A mode is supported if its bit is set to 1.
+ * Bit 0 AAC (Balanced)
+ * Bit 1 AAC (Cool Bottom
+ * Bit 2 AAC (Quiet)
+ * Bit 3 AAC (Performance)
+ * cbRes3, byte 0 Current Thermal Mode
+ * Bit 0 Balanced
+ * Bit 1 Cool Bottom
+ * Bit 2 Quiet
+ * Bit 3 Performanc
+ * cbRes3, byte 1 AAC Configuration type
+ * 0 Global (AAC enable/disable applies to all supported USTT modes)
+ * 1 USTT mode specific
+ * cbRes3, byte 2 Current Active Acoustic Controller (AAC) Mode
+ * If AAC Configuration Type is Global,
+ * 0 AAC mode disabled
+ * 1 AAC mode enabled
+ * If AAC Configuration Type is USTT mode specific (multiple bits may be set),
+ * Bit 0 AAC (Balanced)
+ * Bit 1 AAC (Cool Bottom
+ * Bit 2 AAC (Quiet)
+ * Bit 3 AAC (Performance)
+ * cbRes3, byte 3 Current Fan Failure Mode
+ * Bit 0 Minimal Fan Failure (at least one fan has failed, one fan working)
+ * Bit 1 Catastrophic Fan Failure (all fans have failed)
+ *
+ * cbArg1 0x1 (Set Thermal Information), both desired thermal mode and
+ * desired AAC mode shall be applied
+ * cbArg2, byte 0 Desired Thermal Mode to set
+ * (only one bit may be set for this parameter)
+ * Bit 0 Balanced
+ * Bit 1 Cool Bottom
+ * Bit 2 Quiet
+ * Bit 3 Performance
+ * cbArg2, byte 1 Desired Active Acoustic Controller (AAC) Mode to set
+ * If AAC Configuration Type is Global,
+ * 0 AAC mode disabled
+ * 1 AAC mode enabled
+ * If AAC Configuration Type is USTT mode specific
+ * (multiple bits may be set for this parameter),
+ * Bit 0 AAC (Balanced)
+ * Bit 1 AAC (Cool Bottom
+ * Bit 2 AAC (Quiet)
+ * Bit 3 AAC (Performance)
+ */
+
+#define DELL_ACC_GET_FIELD GENMASK(19, 16)
+#define DELL_ACC_SET_FIELD GENMASK(11, 8)
+#define DELL_THERMAL_SUPPORTED GENMASK(3, 0)
+
+static struct platform_profile_handler *thermal_handler;
+
+enum thermal_mode_bits {
+ DELL_BALANCED = BIT(0),
+ DELL_COOL_BOTTOM = BIT(1),
+ DELL_QUIET = BIT(2),
+ DELL_PERFORMANCE = BIT(3),
+};
+
+static int thermal_get_mode(void)
+{
+ struct calling_interface_buffer buffer;
+ int state;
+ int ret;
+
+ dell_fill_request(&buffer, 0x0, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT);
+ if (ret)
+ return ret;
+ state = buffer.output[2];
+ if (state & DELL_BALANCED)
+ return DELL_BALANCED;
+ else if (state & DELL_COOL_BOTTOM)
+ return DELL_COOL_BOTTOM;
+ else if (state & DELL_QUIET)
+ return DELL_QUIET;
+ else if (state & DELL_PERFORMANCE)
+ return DELL_PERFORMANCE;
+ else
+ return -ENXIO;
+}
+
+static int thermal_get_supported_modes(int *supported_bits)
+{
+ struct calling_interface_buffer buffer;
+ int ret;
+
+ dell_fill_request(&buffer, 0x0, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT);
+ if (ret) {
+ /* Thermal function not supported */
+ if (ret == -ENXIO) {
+ *supported_bits = 0;
+ return 0;
+ } else {
+ return ret;
+ }
+ }
+ *supported_bits = FIELD_GET(DELL_THERMAL_SUPPORTED, buffer.output[1]);
+ return 0;
+}
+
+static int thermal_get_acc_mode(int *acc_mode)
+{
+ struct calling_interface_buffer buffer;
+ int ret;
+
+ dell_fill_request(&buffer, 0x0, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT);
+ if (ret)
+ return ret;
+ *acc_mode = FIELD_GET(DELL_ACC_GET_FIELD, buffer.output[3]);
+ return 0;
+}
+
+static int thermal_set_mode(enum thermal_mode_bits state)
+{
+ struct calling_interface_buffer buffer;
+ int ret;
+ int acc_mode;
+
+ ret = thermal_get_acc_mode(&acc_mode);
+ if (ret)
+ return ret;
+
+ dell_fill_request(&buffer, 0x1, FIELD_PREP(DELL_ACC_SET_FIELD, acc_mode) | state, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT);
+ return ret;
+}
+
+static int thermal_platform_profile_set(struct platform_profile_handler *pprof,
+ enum platform_profile_option profile)
+{
+ switch (profile) {
+ case PLATFORM_PROFILE_BALANCED:
+ return thermal_set_mode(DELL_BALANCED);
+ case PLATFORM_PROFILE_PERFORMANCE:
+ return thermal_set_mode(DELL_PERFORMANCE);
+ case PLATFORM_PROFILE_QUIET:
+ return thermal_set_mode(DELL_QUIET);
+ case PLATFORM_PROFILE_COOL:
+ return thermal_set_mode(DELL_COOL_BOTTOM);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int thermal_platform_profile_get(struct platform_profile_handler *pprof,
+ enum platform_profile_option *profile)
+{
+ int ret;
+
+ ret = thermal_get_mode();
+ if (ret < 0)
+ return ret;
+
+ switch (ret) {
+ case DELL_BALANCED:
+ *profile = PLATFORM_PROFILE_BALANCED;
+ break;
+ case DELL_PERFORMANCE:
+ *profile = PLATFORM_PROFILE_PERFORMANCE;
+ break;
+ case DELL_COOL_BOTTOM:
+ *profile = PLATFORM_PROFILE_COOL;
+ break;
+ case DELL_QUIET:
+ *profile = PLATFORM_PROFILE_QUIET;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int thermal_init(void)
+{
+ int ret;
+ int supported_modes;
+
+ /* If thermal commands not supported, exit without error */
+ if (!dell_smbios_class_is_supported(CLASS_INFO))
+ return 0;
+
+ /* If thermal modes not supported, exit without error */
+ ret = thermal_get_supported_modes(&supported_modes);
+ if (ret < 0)
+ return ret;
+ if (!supported_modes)
+ return 0;
+
+ thermal_handler = kzalloc(sizeof(*thermal_handler), GFP_KERNEL);
+ if (!thermal_handler)
+ return -ENOMEM;
+ thermal_handler->profile_get = thermal_platform_profile_get;
+ thermal_handler->profile_set = thermal_platform_profile_set;
+
+ if (supported_modes & DELL_QUIET)
+ set_bit(PLATFORM_PROFILE_QUIET, thermal_handler->choices);
+ if (supported_modes & DELL_COOL_BOTTOM)
+ set_bit(PLATFORM_PROFILE_COOL, thermal_handler->choices);
+ if (supported_modes & DELL_BALANCED)
+ set_bit(PLATFORM_PROFILE_BALANCED, thermal_handler->choices);
+ if (supported_modes & DELL_PERFORMANCE)
+ set_bit(PLATFORM_PROFILE_PERFORMANCE, thermal_handler->choices);
+
+ /* Clean up if failed */
+ ret = platform_profile_register(thermal_handler);
+ if (ret)
+ kfree(thermal_handler);
+
+ return ret;
+}
+
+static void thermal_cleanup(void)
+{
+ if (thermal_handler) {
+ platform_profile_remove();
+ kfree(thermal_handler);
+ }
+}
+
+static int __init dell_init(void)
+{
+ int ret;
+
+ if (!dmi_check_system(dell_device_table))
+ return -ENODEV;
+
+ /* Do not fail module if thermal modes not supported, just skip */
+ ret = thermal_init();
+ if (ret)
+ goto fail_thermal;
+
+ return 0;
+
+fail_thermal:
+ thermal_cleanup();
+ return ret;
+}
+
+static void __exit dell_exit(void)
+{
+ thermal_cleanup();
+}
+
+module_init(dell_init);
+module_exit(dell_exit);
+
+MODULE_AUTHOR("Lyndon Sanche <lsanche@...deno.ca>");
+MODULE_DESCRIPTION("Dell PC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/dell/dell-smbios-base.c b/drivers/platform/x86/dell/dell-smbios-base.c
index 515c454acfe6..d61b33d5af95 100644
--- a/drivers/platform/x86/dell/dell-smbios-base.c
+++ b/drivers/platform/x86/dell/dell-smbios-base.c
@@ -71,6 +71,7 @@ static struct smbios_call call_blacklist[] = {
/* handled by kernel: dell-laptop */
{0x0000, CLASS_INFO, SELECT_RFKILL},
{0x0000, CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT},
+ {0x0000, CLASS_INFO, SELECT_THERMAL_MANAGEMENT},
};
struct token_range {
diff --git a/drivers/platform/x86/dell/dell-smbios.h b/drivers/platform/x86/dell/dell-smbios.h
index 1d6463cca12a..ea0cc38642a2 100644
--- a/drivers/platform/x86/dell/dell-smbios.h
+++ b/drivers/platform/x86/dell/dell-smbios.h
@@ -19,6 +19,7 @@
/* Classes and selects used only in kernel drivers */
#define CLASS_KBD_BACKLIGHT 4
#define SELECT_KBD_BACKLIGHT 11
+#define SELECT_THERMAL_MANAGEMENT 19
/* Tokens used in kernel drivers, any of these
* should be filtered from userspace access
--
2.42.0
Powered by blists - more mailing lists