| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZkcD9H0P8O7Me5Do@xpf.sh.intel.com>
Date: Fri, 17 May 2024 15:15:00 +0800
From: Pengfei Xu <pengfei.xu@...el.com>
To: syzbot <syzbot+a7f061d2d16154538c58@...kaller.appspotmail.com>,
<ytcoode@...il.com>
CC: <andrii@...nel.org>, <ast@...nel.org>, <bpf@...r.kernel.org>,
<daniel@...earbox.net>, <eddyz87@...il.com>, <haoluo@...gle.com>,
<john.fastabend@...il.com>, <jolsa@...nel.org>, <kpsingh@...nel.org>,
<linux-kernel@...r.kernel.org>, <martin.lau@...ux.dev>, <sdf@...gle.com>,
<song@...nel.org>, <syzkaller-bugs@...glegroups.com>,
<yonghong.song@...ux.dev>, <akpm@...ux-foundation.org>
Subject: Re: [syzbot] [bpf?] possible deadlock in get_page_from_freelist
Hi Yuntao,
Greeting!
On 2024-04-14 at 19:28:16 -0700, syzbot wrote:
> Hello,
>
> syzbot found the following issue on:
>
> HEAD commit: 7efd0a74039f Merge tag 'ata-6.9-rc4' of git://git.kernel.o..
> git tree: upstream
> console output: https://syzkaller.appspot.com/x/log.txt?x=1358aeed180000
> kernel config: https://syzkaller.appspot.com/x/.config?x=285be8dd6baeb438
> dashboard link: https://syzkaller.appspot.com/bug?extid=a7f061d2d16154538c58
> compiler: gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40
>
> Unfortunately, I don't have any reproducer for this issue yet.
>
I used syzkaller and could reproduce the similar issue "WARNING in
get_page_from_freelist" in v6.9 mainline kernel.
Bisected and found first bad commit:
"
816d334afa85 kexec: modify the meaning of the end parameter in kimage_is_destination_range()
"
Revert above commit on top of v6.9 kernel this issue was gone.
All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/240517_085953_get_page_from_freelist
mount_*.gz are in above link.
Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/240517_085953_get_page_from_freelist/rep.c
Syzkaller syscall repro steps: https://github.com/xupengfe/syzkaller_logs/blob/main/240517_085953_get_page_from_freelist/repro.prog
Syzkaller report: https://github.com/xupengfe/syzkaller_logs/blob/main/240517_085953_get_page_from_freelist/repro.report
Kconfig(make olddefconfig): https://github.com/xupengfe/syzkaller_logs/blob/main/240517_085953_get_page_from_freelist/kconfig_origin
Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/240517_085953_get_page_from_freelist/bisect_info.log
v6.9 dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/240517_085953_get_page_from_freelist/a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6_dmesg.log
v6.9 bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/240517_085953_get_page_from_freelist/bzImage_a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6.tar.gz
[ 17.436013] loop0: detected capacity change from 0 to 1024
[ 17.456160] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 17.456746] loop0: detected capacity change from 0 to 1024
[ 17.456809] I/O error, dev loop0, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 17.457548] EXT4-fs: Invalid want_extra_isize 0
[ 17.575984] repro: page allocation failure: order:1, mode:0x10cc0(GFP_KERNEL|__GFP_NORETRY), nodemask=(null),cpuset=/,mems_allowed=0
[ 17.576621] CPU: 1 PID: 726 Comm: repro Not tainted 6.9.0-a38297e3fb01+ #1
[ 17.576930] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 17.577412] Call Trace:
[ 17.577526] <TASK>
[ 17.577626] dump_stack_lvl+0x121/0x150
[ 17.577813] dump_stack+0x19/0x20
[ 17.577969] warn_alloc+0x218/0x350
[ 17.578133] ? __pfx_warn_alloc+0x10/0x10
[ 17.578317] ? __alloc_pages_direct_compact+0x130/0xa00
[ 17.578552] ? __pfx___alloc_pages_direct_compact+0x10/0x10
[ 17.578803] ? __drain_all_pages+0x27b/0x480
[ 17.579021] __alloc_pages_slowpath.constprop.0+0x1b62/0x2160
[ 17.579291] ? __pfx___alloc_pages_slowpath.constprop.0+0x10/0x10
[ 17.579569] ? __pfx_get_page_from_freelist+0x10/0x10
[ 17.579802] ? prepare_alloc_pages.constprop.0+0x15b/0x4f0
[ 17.580032] __alloc_pages+0x48f/0x580
[ 17.580212] ? __pfx___alloc_pages+0x10/0x10
[ 17.580392] ? kasan_save_stack+0x40/0x60
[ 17.580583] ? kasan_save_stack+0x2c/0x60
[ 17.580772] ? kasan_save_track+0x18/0x40
[ 17.580946] ? _find_first_bit+0x95/0xc0
[ 17.581114] ? policy_nodemask+0xf9/0x450
[ 17.581300] alloc_pages_mpol+0x296/0x590
[ 17.581487] ? __pfx_alloc_pages_mpol+0x10/0x10
[ 17.581695] ? arch_kexec_post_alloc_pages+0x37/0x70
[ 17.581924] ? __pfx_write_comp_data+0x10/0x10
[ 17.582133] alloc_pages+0x13f/0x160
[ 17.582302] kimage_alloc_pages+0x79/0x240
[ 17.582498] kimage_alloc_control_pages+0x1cb/0xa60
[ 17.582727] ? __pfx_kimage_alloc_control_pages+0x10/0x10
[ 17.582973] ? __sanitizer_cov_trace_const_cmp1+0x1e/0x30
[ 17.583224] do_kexec_load+0x337/0x750
[ 17.583406] __x64_sys_kexec_load+0x1cc/0x240
[ 17.583619] x64_sys_call+0x1aa2/0x20c0
[ 17.583807] do_syscall_64+0x6f/0x150
[ 17.583988] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 17.584217] RIP: 0033:0x7f4f2ec3ee5d
[ 17.584382] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 af 1b 00 f7 d8 64 89 01 48
[ 17.585171] RSP: 002b:00007ffd101da888 EFLAGS: 00000246 ORIG_RAX: 00000000000000f6
[ 17.585500] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4f2ec3ee5d
[ 17.585985] RDX: 00000000200003c0 RSI: 0000000000000002 RDI: 0000000000000000
[ 17.586346] RBP: 00007ffd101da8a0 R08: 0000000000000800 R09: 0000000000000800
[ 17.586656] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd101da9b8
[ 17.587001] R13: 0000000000402862 R14: 0000000000412e08 R15: 00007f4f2ef30000
[ 17.587381] </TASK>
[ 17.587559] Mem-Info:
[ 17.587667] active_anon:117 inactive_anon:14235 isolated_anon:0
[ 17.587667] active_file:25278 inactive_file:25394 isolated_file:0
[ 17.587667] unevictable:0 dirty:82 writeback:189
[ 17.587667] slab_reclaimable:14774 slab_unreclaimable:23678
[ 17.587667] mapped:13500 shmem:1187 pagetables:846
[ 17.587667] sec_pagetables:0 bounce:0
[ 17.587667] kernel_misc_reclaimable:0
[ 17.587667] free:13396 free_pcp:37 free_cma:0
[ 17.589349] Node 0 active_anon:468kB inactive_anon:56940kB active_file:101112kB inactive_file:101576kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:54000kB dirty:328kB writeback:756kB shmem:4748kB shmem_thp:0kB shmem_pmdmapped:0kB anon_thp:0kB writeback_tmp:0kB kernel_stack:5504kB pagetables:3384kB sec_pagetables:0kB all_unreclaimable? no
[ 17.590712] Node 0 DMA free:6664kB boost:0kB min:424kB low:528kB high:632kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
[ 17.591848] lowmem_reserve[]: 0 1564 1564 1564 1564
[ 17.592075] Node 0 DMA32 free:46920kB boost:0kB min:44628kB low:55784kB high:66940kB reserved_highatomic:0KB active_anon:468kB inactive_anon:56940kB active_file:101072kB inactive_file:101568kB unevictable:0kB writepending:1504kB present:2080640kB managed:1620324kB mlocked:0kB bounce:0kB free_pcp:468kB local_pcp:0kB free_cma:0kB
[ 17.593443] lowmem_reserve[]: 0 0 0 0 0
[ 17.593624] Node 0 DMA: 0*4kB 2*8kB (UM) 1*16kB (M) 1*32kB (M) 1*64kB (M) 1*128kB (M) 1*256kB (M) 2*512kB (UM) 1*1024kB (M) 0*2048kB 1*4096kB (M) = 6656kB
[ 17.594261] Node 0 DMA32: 770*4kB (UME) 193*8kB (UME) 121*16kB (UME) 72*32kB (UME) 39*64kB (UME) 15*128kB (ME) 7*256kB (UM) 4*512kB (ME) 2*1024kB (UM) 4*2048kB (UME) 5*4096kB (M) = 47840kB
[ 17.595020] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
[ 17.595399] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[ 17.595774] 51855 total pagecache pages
[ 17.595949] 0 pages in swap cache
[ 17.596170] Free swap = 0kB
[ 17.596304] Total swap = 0kB
[ 17.596440] 524158 pages RAM
[ 17.596589] 0 pages HighMem/MovableOnly
[ 17.596767] 115237 pages reserved
[ 17.596934] 0 pages cma reserved
[ 17.597149] 0 pages hwpoisoned
[ 17.645660] kexec: Could not allocate control_code_buffer
[ 17.785654] loop0: detected capacity change from 0 to 65536
[ 17.787652] =======================================================
[ 17.787652] WARNING: The mand mount option has been deprecated and
[ 17.787652] and is ignored by this kernel. Remove the mand
[ 17.787652] option from the mount to silence this warning.
[ 17.787652] =======================================================
[ 17.801532] XFS (loop0): cannot change alignment: superblock does not support data alignment
[ 17.878479] loop0: detected capacity change from 0 to 1024
[ 17.888666] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 17.894988] loop0: detected capacity change from 0 to 1024
[ 17.895613] EXT4-fs: Invalid want_extra_isize 0
[ 17.909948] loop0: detected capacity change from 0 to 128
[ 18.105190] kexec: Could not allocate control_code_buffer
Hope it's helpful.
Thanks!
---
If you don't need the following environment to reproduce the problem or if you
already have one reproduced environment, please ignore the following information.
How to reproduce:
git clone https://gitlab.com/xupengfe/repro_vm_env.git
cd repro_vm_env
tar -xvf repro_vm_env.tar.gz
cd repro_vm_env; ./start3.sh // it needs qemu-system-x86_64 and I used v7.1.0
// start3.sh will load bzImage_2241ab53cbb5cdb08a6b2d4688feb13971058f65 v6.2-rc5 kernel
// You could change the bzImage_xxx as you want
// Maybe you need to remove line "-drive if=pflash,format=raw,readonly=on,file=./OVMF_CODE.fd \" for different qemu version
You could use below command to log in, there is no password for root.
ssh -p 10023 root@...alhost
After login vm(virtual machine) successfully, you could transfer reproduced
binary to the vm by below way, and reproduce the problem in vm:
gcc -pthread -o repro repro.c
scp -P 10023 repro root@...alhost:/root/
Get the bzImage for target kernel:
Please use target kconfig and copy it to kernel_src/.config
make olddefconfig
make -jx bzImage //x should equal or less than cpu num your pc has
Fill the bzImage file into above start3.sh to load the target kernel in vm.
Tips:
If you already have qemu-system-x86_64, please ignore below info.
If you want to install qemu v7.1.0 version:
git clone https://github.com/qemu/qemu.git
cd qemu
git checkout -f v7.1.0
mkdir build
cd build
yum install -y ninja-build.x86_64
yum -y install libslirp-devel.x86_64
./configure --target-list=x86_64-softmmu --enable-kvm --enable-vnc --enable-gtk --enable-sdl --enable-usb-redir --enable-slirp
make
make install
Best Regards,
Thanks!
> Downloadable assets:
> disk image (non-bootable): https://storage.googleapis.com/syzbot-assets/7bc7510fe41f/non_bootable_disk-7efd0a74.raw.xz
> vmlinux: https://storage.googleapis.com/syzbot-assets/39eb4e17e7f0/vmlinux-7efd0a74.xz
> kernel image: https://storage.googleapis.com/syzbot-assets/b9a08c36e0ca/bzImage-7efd0a74.xz
>
> IMPORTANT: if you fix the issue, please add the following tag to the commit:
> Reported-by: syzbot+a7f061d2d16154538c58@...kaller.appspotmail.com
>
> ======================================================
> WARNING: possible circular locking dependency detected
> 6.9.0-rc3-syzkaller-00355-g7efd0a74039f #0 Not tainted
> ------------------------------------------------------
> syz-executor.2/7645 is trying to acquire lock:
> ffff88807ffd7d58 (&zone->lock){-.-.}-{2:2}, at: rmqueue_buddy mm/page_alloc.c:2730 [inline]
> ffff88807ffd7d58 (&zone->lock){-.-.}-{2:2}, at: rmqueue mm/page_alloc.c:2911 [inline]
> ffff88807ffd7d58 (&zone->lock){-.-.}-{2:2}, at: get_page_from_freelist+0x4b9/0x3780 mm/page_alloc.c:3314
>
> but task is already holding lock:
> ffff88802c8739f8 (&trie->lock){-.-.}-{2:2}, at: trie_update_elem+0xc8/0xdd0 kernel/bpf/lpm_trie.c:324
>
> which lock already depends on the new lock.
>
>
> the existing dependency chain (in reverse order) is:
>
> -> #1 (&trie->lock){-.-.}-{2:2}:
> __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
> _raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162
> trie_delete_elem+0xb0/0x7e0 kernel/bpf/lpm_trie.c:451
> ___bpf_prog_run+0x3e51/0xabd0 kernel/bpf/core.c:1997
> __bpf_prog_run32+0xc1/0x100 kernel/bpf/core.c:2236
> bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline]
> __bpf_prog_run include/linux/filter.h:657 [inline]
> bpf_prog_run include/linux/filter.h:664 [inline]
> __bpf_trace_run kernel/trace/bpf_trace.c:2381 [inline]
> bpf_trace_run2+0x151/0x420 kernel/trace/bpf_trace.c:2420
> __bpf_trace_contention_end+0xca/0x110 include/trace/events/lock.h:122
> trace_contention_end.constprop.0+0xea/0x170 include/trace/events/lock.h:122
> __pv_queued_spin_lock_slowpath+0x266/0xc80 kernel/locking/qspinlock.c:560
> pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:584 [inline]
> queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline]
> queued_spin_lock include/asm-generic/qspinlock.h:114 [inline]
> do_raw_spin_lock+0x210/0x2c0 kernel/locking/spinlock_debug.c:116
> __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:111 [inline]
> _raw_spin_lock_irqsave+0x42/0x60 kernel/locking/spinlock.c:162
> rmqueue_bulk mm/page_alloc.c:2131 [inline]
> __rmqueue_pcplist+0x5a8/0x1b00 mm/page_alloc.c:2826
> rmqueue_pcplist mm/page_alloc.c:2868 [inline]
> rmqueue mm/page_alloc.c:2905 [inline]
> get_page_from_freelist+0xbaa/0x3780 mm/page_alloc.c:3314
> __alloc_pages+0x22b/0x2460 mm/page_alloc.c:4575
> __alloc_pages_node include/linux/gfp.h:238 [inline]
> alloc_pages_node include/linux/gfp.h:261 [inline]
> alloc_slab_page mm/slub.c:2175 [inline]
> allocate_slab mm/slub.c:2338 [inline]
> new_slab+0xcc/0x3a0 mm/slub.c:2391
> ___slab_alloc+0x66d/0x1790 mm/slub.c:3525
> __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3610
> __slab_alloc_node mm/slub.c:3663 [inline]
> slab_alloc_node mm/slub.c:3835 [inline]
> __do_kmalloc_node mm/slub.c:3965 [inline]
> __kmalloc_node_track_caller+0x367/0x470 mm/slub.c:3986
> kmalloc_reserve+0xef/0x2c0 net/core/skbuff.c:599
> __alloc_skb+0x164/0x380 net/core/skbuff.c:668
> alloc_skb include/linux/skbuff.h:1313 [inline]
> nsim_dev_trap_skb_build drivers/net/netdevsim/dev.c:748 [inline]
> nsim_dev_trap_report drivers/net/netdevsim/dev.c:805 [inline]
> nsim_dev_trap_report_work+0x2a4/0xc80 drivers/net/netdevsim/dev.c:850
> process_one_work+0x9a9/0x1ac0 kernel/workqueue.c:3254
> process_scheduled_works kernel/workqueue.c:3335 [inline]
> worker_thread+0x6c8/0xf70 kernel/workqueue.c:3416
> kthread+0x2c1/0x3a0 kernel/kthread.c:388
> ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
> ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
>
> -> #0 (&zone->lock){-.-.}-{2:2}:
> check_prev_add kernel/locking/lockdep.c:3134 [inline]
> check_prevs_add kernel/locking/lockdep.c:3253 [inline]
> validate_chain kernel/locking/lockdep.c:3869 [inline]
> __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
> lock_acquire kernel/locking/lockdep.c:5754 [inline]
> lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
> __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
> _raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162
> rmqueue_buddy mm/page_alloc.c:2730 [inline]
> rmqueue mm/page_alloc.c:2911 [inline]
> get_page_from_freelist+0x4b9/0x3780 mm/page_alloc.c:3314
> __alloc_pages+0x22b/0x2460 mm/page_alloc.c:4575
> __alloc_pages_node include/linux/gfp.h:238 [inline]
> alloc_pages_node include/linux/gfp.h:261 [inline]
> __kmalloc_large_node+0x7f/0x1a0 mm/slub.c:3911
> __do_kmalloc_node mm/slub.c:3954 [inline]
> __kmalloc_node.cold+0x5/0x5f mm/slub.c:3973
> kmalloc_node include/linux/slab.h:648 [inline]
> bpf_map_kmalloc_node+0x98/0x4a0 kernel/bpf/syscall.c:422
> lpm_trie_node_alloc kernel/bpf/lpm_trie.c:291 [inline]
> trie_update_elem+0x1ef/0xdd0 kernel/bpf/lpm_trie.c:333
> bpf_map_update_value+0x2c1/0x6c0 kernel/bpf/syscall.c:203
> map_update_elem+0x623/0x910 kernel/bpf/syscall.c:1641
> __sys_bpf+0xab9/0x4b40 kernel/bpf/syscall.c:5648
> __do_sys_bpf kernel/bpf/syscall.c:5767 [inline]
> __se_sys_bpf kernel/bpf/syscall.c:5765 [inline]
> __x64_sys_bpf+0x78/0xc0 kernel/bpf/syscall.c:5765
> do_syscall_x64 arch/x86/entry/common.c:52 [inline]
> do_syscall_64+0xcf/0x260 arch/x86/entry/common.c:83
> entry_SYSCALL_64_after_hwframe+0x77/0x7f
>
> other info that might help us debug this:
>
> Possible unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(&trie->lock);
> lock(&zone->lock);
> lock(&trie->lock);
> lock(&zone->lock);
>
> *** DEADLOCK ***
>
> 2 locks held by syz-executor.2/7645:
> #0: ffffffff8d7b0e20 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline]
> #0: ffffffff8d7b0e20 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline]
> #0: ffffffff8d7b0e20 (rcu_read_lock){....}-{1:2}, at: bpf_map_update_value+0x24b/0x6c0 kernel/bpf/syscall.c:202
> #1: ffff88802c8739f8 (&trie->lock){-.-.}-{2:2}, at: trie_update_elem+0xc8/0xdd0 kernel/bpf/lpm_trie.c:324
>
> stack backtrace:
> CPU: 1 PID: 7645 Comm: syz-executor.2 Not tainted 6.9.0-rc3-syzkaller-00355-g7efd0a74039f #0
> Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
> Call Trace:
> <TASK>
> __dump_stack lib/dump_stack.c:88 [inline]
> dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
> check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187
> check_prev_add kernel/locking/lockdep.c:3134 [inline]
> check_prevs_add kernel/locking/lockdep.c:3253 [inline]
> validate_chain kernel/locking/lockdep.c:3869 [inline]
> __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
> lock_acquire kernel/locking/lockdep.c:5754 [inline]
> lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
> __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
> _raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162
> rmqueue_buddy mm/page_alloc.c:2730 [inline]
> rmqueue mm/page_alloc.c:2911 [inline]
> get_page_from_freelist+0x4b9/0x3780 mm/page_alloc.c:3314
> __alloc_pages+0x22b/0x2460 mm/page_alloc.c:4575
> __alloc_pages_node include/linux/gfp.h:238 [inline]
> alloc_pages_node include/linux/gfp.h:261 [inline]
> __kmalloc_large_node+0x7f/0x1a0 mm/slub.c:3911
> __do_kmalloc_node mm/slub.c:3954 [inline]
> __kmalloc_node.cold+0x5/0x5f mm/slub.c:3973
> kmalloc_node include/linux/slab.h:648 [inline]
> bpf_map_kmalloc_node+0x98/0x4a0 kernel/bpf/syscall.c:422
> lpm_trie_node_alloc kernel/bpf/lpm_trie.c:291 [inline]
> trie_update_elem+0x1ef/0xdd0 kernel/bpf/lpm_trie.c:333
> bpf_map_update_value+0x2c1/0x6c0 kernel/bpf/syscall.c:203
> map_update_elem+0x623/0x910 kernel/bpf/syscall.c:1641
> __sys_bpf+0xab9/0x4b40 kernel/bpf/syscall.c:5648
> __do_sys_bpf kernel/bpf/syscall.c:5767 [inline]
> __se_sys_bpf kernel/bpf/syscall.c:5765 [inline]
> __x64_sys_bpf+0x78/0xc0 kernel/bpf/syscall.c:5765
> do_syscall_x64 arch/x86/entry/common.c:52 [inline]
> do_syscall_64+0xcf/0x260 arch/x86/entry/common.c:83
> entry_SYSCALL_64_after_hwframe+0x77/0x7f
> RIP: 0033:0x7fdb1c27de69
> Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
> RSP: 002b:00007fdb1d0210c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
> RAX: ffffffffffffffda RBX: 00007fdb1c3abf80 RCX: 00007fdb1c27de69
> RDX: 0000000000000020 RSI: 0000000020001400 RDI: 0000000000000002
> RBP: 00007fdb1c2ca47a R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
> R13: 000000000000000b R14: 00007fdb1c3abf80 R15: 00007ffe7cd30f08
> </TASK>
> loop2: detected capacity change from 0 to 512
> ext4: Unknown parameter '���������������3;�{\C _r���f�gD.Z*��ג�Md�;�s�8)V.�Z�-#��S%.�SY�E`1t.AS�>�>���.d]�x��h'
>
>
> ---
> This report is generated by a bot. It may contain errors.
> See https://goo.gl/tpsmEJ for more information about syzbot.
> syzbot engineers can be reached at syzkaller@...glegroups.com.
>
> syzbot will keep track of this issue. See:
> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>
> If the report is already addressed, let syzbot know by replying with:
> #syz fix: exact-commit-title
>
> If you want to overwrite report's subsystems, reply with:
> #syz set subsystems: new-subsystem
> (See the list of subsystem names on the web dashboard)
>
> If the report is a duplicate of another one, reply with:
> #syz dup: exact-subject-of-another-report
>
> If you want to undo deduplication, reply with:
> #syz undup
Powered by blists - more mailing lists