[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240519181349.0209271c@jic23-huawei>
Date: Sun, 19 May 2024 18:13:49 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Dumitru Ceclan via B4 Relay
<devnull+dumitru.ceclan.analog.com@...nel.org>
Cc: dumitru.ceclan@...log.com, Lars-Peter Clausen <lars@...afoo.de>, Michael
Hennerich <Michael.Hennerich@...log.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley
<conor+dt@...nel.org>, David Lechner <dlechner@...libre.com>,
linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Dumitru Ceclan <mitrutzceclan@...il.com>
Subject: Re: [PATCH v2 8/9] iio: adc: ad7173: Add support for AD411x devices
On Tue, 14 May 2024 10:22:53 +0300
Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@...nel.org> wrote:
> From: Dumitru Ceclan <dumitru.ceclan@...log.com>
>
> Add support for AD4111/AD4112/AD4114/AD4115/AD4116.
>
> The AD411X family encompasses a series of low power, low noise, 24-bit,
> sigma-delta analog-to-digital converters that offer a versatile range of
> specifications.
>
> This family of ADCs integrates an analog front end suitable for processing
> both fully differential and single-ended, bipolar voltage inputs
> addressing a wide array of industrial and instrumentation requirements.
>
> - All ADCs have inputs with a precision voltage divider with a division
> ratio of 10.
> - AD4116 has 5 low level inputs without a voltage divider.
> - AD4111 and AD4112 support current inputs (0 mA to 20 mA) using a 50ohm
> shunt resistor.
>
> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@...log.com>
A couple of trivial things inline. Otherwise lgtm
> @@ -1058,17 +1296,26 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
> chan->scan_index = chan_index;
> chan->channel = ain[0];
> chan->channel2 = ain[1];
> - chan->differential = true;
> -
> chan_st_priv->ain = AD7173_CH_ADDRESS(ain[0], ain[1]);
> chan_st_priv->chan_reg = chan_index;
> - chan_st_priv->cfg.input_buf = st->info->has_input_buf;
> chan_st_priv->cfg.odr = 0;
> -
> chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar");
> +
> if (chan_st_priv->cfg.bipolar)
> chan->info_mask_separate |= BIT(IIO_CHAN_INFO_OFFSET);
>
> + if (is_current_chan)
> + chan->type = IIO_CURRENT;
> + else
> + chan_st_priv->cfg.input_buf = st->info->has_input_buf;
> +
> + ret = fwnode_property_match_property_string(child,
> + "adi,channel-type",
> + ad7173_channel_types,
> + ARRAY_SIZE(ad7173_channel_types));
> + chan->differential = (ret < 0 || ret == AD7173_CHAN_DIFFERENTIAL)
> + ? true : false;
That's not a boolean. So better to set 1 or 0.
> +MODULE_DESCRIPTION("Analog Devices AD717x and AD411x ADC driver");
I'm scared of wildcards even in descriptive fields as they often end up covering
something unintended. I'd just go with 'and similar'.
> MODULE_LICENSE("GPL");
>
Powered by blists - more mailing lists