| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240520110630.2568767-1-vattunuru@marvell.com>
Date: Mon, 20 May 2024 04:06:30 -0700
From: Vamsi Attunuru <vattunuru@...vell.com>
To: <gregkh@...uxfoundation.org>
CC: <vattunuru@...vell.com>, <jerinj@...vell.com>, <schalla@...vell.com>,
<arnd@...db.de>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v7 1/1] misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical
function which initializes DPI DMA hardware's global configuration and
enables hardware mailbox channels between physical function (PF) and
it's virtual functions (VF). VF device drivers (User space drivers) use
this hw mailbox to communicate any required device configuration on it's
respective VF device. Accordingly, this DPI PF driver provisions the
VF device resources.
At the hardware level, the DPI physical function (PF) acts as a management
interface to setup the VF device resources, VF devices are only provisioned
to handle or control the actual DMA Engine's data transfer capabilities.
Signed-off-by: Vamsi Attunuru <vattunuru@...vell.com>
Reviewed-by: Srujana Challa <schalla@...vell.com>
---
Changes V6 -> V7:
- Updated documentation with required references
- Addressed V6 review comments
Changes V5 -> V6:
- Updated documentation
- Fixed data types in uapi file
Changes V4 -> V5:
- Fixed license and data types in uapi file
Changes V3 -> V4:
- Moved ioctl definations to .h file
- Fixed structure alignements which are passed in ioctl
Changes V2 -> V3:
- Added ioctl operation to the fops
- Used managed version of kzalloc & request_irq
- Addressed miscellaneous comments
Changes V1 -> V2:
- Fixed return values and busy-wait loops
- Merged .h file into .c file
- Fixed directory structure
- Removed module params
- Registered the device as misc device
Documentation/misc-devices/index.rst | 1 +
Documentation/misc-devices/mrvl_cn10k_dpi.rst | 53 ++
.../userspace-api/ioctl/ioctl-number.rst | 1 +
MAINTAINERS | 5 +
drivers/misc/Kconfig | 14 +
drivers/misc/Makefile | 1 +
drivers/misc/mrvl_cn10k_dpi.c | 698 ++++++++++++++++++
include/uapi/misc/mrvl_cn10k_dpi.h | 37 +
8 files changed, 810 insertions(+)
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index 2d0ce9138588..8c5b226d8313 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -21,6 +21,7 @@ fit into other categories.
isl29003
lis3lv02d
max6875
+ mrvl_cn10k_dpi
oxsemi-tornado
pci-endpoint-test
spear-pcie-gadget
diff --git a/Documentation/misc-devices/mrvl_cn10k_dpi.rst b/Documentation/misc-devices/mrvl_cn10k_dpi.rst
new file mode 100644
index 000000000000..ff59560a25cf
--- /dev/null
+++ b/Documentation/misc-devices/mrvl_cn10k_dpi.rst
@@ -0,0 +1,53 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+Marvell CN10K DMA packet interface (DPI) driver
+===============================================
+
+Overview
+========
+
+DPI is a DMA packet interface hardware block in Marvell's CN10K silicon.
+DPI hardware comprises a physical function (PF), its virtual functions,
+mailbox logic, and a set of DMA engines & DMA command queues.
+
+DPI PF function is an administrative function which services the mailbox
+requests from its VF functions and provisions DMA engine resources to
+it's VF functions.
+
+mrvl_cn10k_dpi.ko misc driver loads on DPI PF device and services the
+mailbox commands submitted by the VF devices and accordingly initializes
+the DMA engines and VF device's DMA command queues. Also, driver creates
+/dev/mrvl-cn10k-dpi node to set DMA engine and PEM (PCIe interface) port
+attributes like fifo length, molr, mps & mrrs.
+
+DPI PF driver is just an administrative driver to setup its VF device's
+queues and provisions the hardware resources, it cannot initiate any
+DMA operations. Only VF devices are provisioned with DMA capabilities.
+
+Driver location
+===============
+
+drivers/misc/mrvl_cn10k_dpi.c
+
+Driver IOCTLs
+=============
+
+:c:macro::`DPI_MPS_MRRS_CFG`
+ioctl that sets max payload size & max read request size parameters of
+a pem port to which DMA engines are wired.
+
+
+:c:macro::`DPI_ENGINE_CFG`
+ioctl that sets DMA engine's fifo sizes & max outstanding load request
+thresholds.
+
+User space code example
+=======================
+
+DPI VF devices are probed and accessed from user space applications using
+vfio-pci driver. Below is a sample dpi dma application to demonstrate on
+how applications use mailbox and ioctl services from DPI PF kernel driver.
+
+https://github.com/MarvellEmbeddedProcessors/dpi-sample-app
+
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index a141e8e65c5d..def539770439 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -362,6 +362,7 @@ Code Seq# Include File Comments
0xB6 all linux/fpga-dfl.h
0xB7 all uapi/linux/remoteproc_cdev.h <mailto:linux-remoteproc@...r.kernel.org>
0xB7 all uapi/linux/nsfs.h <mailto:Andrei Vagin <avagin@...nvz.org>>
+0xB8 01-02 uapi/misc/mrvl_cn10k_dpi.h Marvell CN10K DPI driver
0xC0 00-0F linux/usb/iowarrior.h
0xCA 00-0F uapi/misc/cxl.h
0xCA 10-2F uapi/misc/ocxl.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 758c202ec712..091660ae2758 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13238,6 +13238,11 @@ S: Supported
F: Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
F: drivers/mmc/host/sdhci-xenon*
+MARVELL OCTEON CN10K DPI DRIVER
+M: Vamsi Attunuru <vattunuru@...vell.com>
+S: Supported
+F: drivers/misc/mrvl_cn10k_dpi.c
+
MATROX FRAMEBUFFER DRIVER
L: linux-fbdev@...r.kernel.org
S: Orphan
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 2907b5c23368..68dcbb76bd4e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -584,6 +584,20 @@ config NSM
To compile this driver as a module, choose M here.
The module will be called nsm.
+config MARVELL_CN10K_DPI
+ tristate "Octeon CN10K DPI driver"
+ depends on ARM64 && PCI
+ help
+ Enables Octeon CN10K DMA packet interface (DPI) driver which
+ intializes DPI hardware's physical function (PF) device's
+ global configuration and its virtual function (VFs) resource
+ configuration to enable DMA transfers. DPI PF device does not
+ have any data movement functionality, it only serves VF's
+ resource configuration requests.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mrvl_cn10k_dpi.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 153a3f4837e8..852a7e3a5472 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -69,3 +69,4 @@ obj-$(CONFIG_TMR_INJECT) += xilinx_tmr_inject.o
obj-$(CONFIG_TPS6594_ESM) += tps6594-esm.o
obj-$(CONFIG_TPS6594_PFSM) += tps6594-pfsm.o
obj-$(CONFIG_NSM) += nsm.o
+obj-$(CONFIG_MARVELL_CN10K_DPI) += mrvl_cn10k_dpi.o
diff --git a/drivers/misc/mrvl_cn10k_dpi.c b/drivers/misc/mrvl_cn10k_dpi.c
new file mode 100644
index 000000000000..33337873afde
--- /dev/null
+++ b/drivers/misc/mrvl_cn10k_dpi.c
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon CN10K DPI driver
+ *
+ * Copyright (C) 2024 Marvell.
+ *
+ */
+
+#include <linux/compat.h>
+#include <linux/delay.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <uapi/misc/mrvl_cn10k_dpi.h>
+
+/* PCI device IDs */
+#define PCI_DEVID_MRVL_CN10K_DPI_PF 0xA080
+#define PCI_SUBDEVID_MRVL_CN10K_DPI_PF 0xB900
+
+/* PCI BAR Number */
+#define PCI_DPI_CFG_BAR 0
+
+/* MSI-X interrupts */
+#define DPI_MAX_REQQ_INT 0x20
+#define DPI_MAX_CC_INT 0x40
+
+/* MBOX MSI-X interrupt vector index */
+#define DPI_MBOX_PF_VF_INT_IDX 0x75
+
+#define DPI_MAX_IRQS (DPI_MBOX_PF_VF_INT_IDX + 1)
+
+#define DPI_MAX_VFS 0x20
+
+#define DPI_MAX_ENG_FIFO_SZ 0x20
+#define DPI_MAX_ENG_MOLR 0x400
+
+#define DPI_DMA_IDS_DMA_NPA_PF_FUNC(x) (((x) & GENMASK_ULL(15, 0)) << 16)
+#define DPI_DMA_IDS_INST_STRM(x) (((x) & GENMASK_ULL(7, 0)) << 40)
+#define DPI_DMA_IDS_DMA_STRM(x) (((x) & GENMASK_ULL(7, 0)) << 32)
+#define DPI_DMA_ENG_EN_MOLR(x) (((x) & GENMASK_ULL(9, 0)) << 32)
+#define DPI_EBUS_PORTX_CFG_MPS(x) (((x) & GENMASK(2, 0)) << 4)
+#define DPI_DMA_IDS_DMA_SSO_PF_FUNC(x) ((x) & GENMASK(15, 0))
+#define DPI_DMA_IDS2_INST_AURA(x) ((x) & GENMASK(19, 0))
+#define DPI_DMA_IBUFF_CSIZE_CSIZE(x) ((x) & GENMASK(13, 0))
+#define DPI_EBUS_PORTX_CFG_MRRS(x) ((x) & GENMASK(2, 0))
+#define DPI_ENG_BUF_BLKS(x) ((x) & GENMASK(5, 0))
+#define DPI_DMA_CONTROL_DMA_ENB GENMASK_ULL(53, 48)
+
+#define DPI_DMA_CONTROL_O_MODE BIT_ULL(14)
+#define DPI_DMA_CONTROL_LDWB BIT_ULL(32)
+#define DPI_DMA_CONTROL_WQECSMODE1 BIT_ULL(37)
+#define DPI_DMA_CONTROL_ZBWCSEN BIT_ULL(39)
+#define DPI_DMA_CONTROL_WQECSOFF(offset) (((u64)offset) << 40)
+#define DPI_DMA_CONTROL_WQECSDIS BIT_ULL(47)
+#define DPI_DMA_CONTROL_PKT_EN BIT_ULL(56)
+#define DPI_DMA_IBUFF_CSIZE_NPA_FREE BIT(16)
+
+#define DPI_CTL_EN BIT_ULL(0)
+#define DPI_DMA_CC_INT BIT_ULL(0)
+#define DPI_DMA_QRST BIT_ULL(0)
+
+#define DPI_REQQ_INT_INSTRFLT BIT_ULL(0)
+#define DPI_REQQ_INT_RDFLT BIT_ULL(1)
+#define DPI_REQQ_INT_WRFLT BIT_ULL(2)
+#define DPI_REQQ_INT_CSFLT BIT_ULL(3)
+#define DPI_REQQ_INT_INST_DBO BIT_ULL(4)
+#define DPI_REQQ_INT_INST_ADDR_NULL BIT_ULL(5)
+#define DPI_REQQ_INT_INST_FILL_INVAL BIT_ULL(6)
+#define DPI_REQQ_INT_INSTR_PSN BIT_ULL(7)
+
+#define DPI_REQQ_INT \
+ (DPI_REQQ_INT_INSTRFLT | \
+ DPI_REQQ_INT_RDFLT | \
+ DPI_REQQ_INT_WRFLT | \
+ DPI_REQQ_INT_CSFLT | \
+ DPI_REQQ_INT_INST_DBO | \
+ DPI_REQQ_INT_INST_ADDR_NULL | \
+ DPI_REQQ_INT_INST_FILL_INVAL | \
+ DPI_REQQ_INT_INSTR_PSN)
+
+#define DPI_PF_RAS_EBI_DAT_PSN BIT_ULL(0)
+#define DPI_PF_RAS_NCB_DAT_PSN BIT_ULL(1)
+#define DPI_PF_RAS_NCB_CMD_PSN BIT_ULL(2)
+
+#define DPI_PF_RAS_INT \
+ (DPI_PF_RAS_EBI_DAT_PSN | \
+ DPI_PF_RAS_NCB_DAT_PSN | \
+ DPI_PF_RAS_NCB_CMD_PSN)
+
+#define DPI_DMAX_IBUFF_CSIZE(x) (0x0ULL | ((x) << 11))
+#define DPI_DMAX_IDS(x) (0x18ULL | ((x) << 11))
+#define DPI_DMAX_IDS2(x) (0x20ULL | ((x) << 11))
+#define DPI_DMAX_QRST(x) (0x30ULL | ((x) << 11))
+
+#define DPI_CTL 0x10010ULL
+#define DPI_DMA_CONTROL 0x10018ULL
+#define DPI_PF_RAS 0x10308ULL
+#define DPI_PF_RAS_ENA_W1C 0x10318ULL
+#define DPI_MBOX_VF_PF_INT 0x16300ULL
+#define DPI_MBOX_VF_PF_INT_W1S 0x16308ULL
+#define DPI_MBOX_VF_PF_INT_ENA_W1C 0x16310ULL
+#define DPI_MBOX_VF_PF_INT_ENA_W1S 0x16318ULL
+
+#define DPI_DMA_ENGX_EN(x) (0x10040ULL | ((x) << 3))
+#define DPI_ENGX_BUF(x) (0x100C0ULL | ((x) << 3))
+#define DPI_EBUS_PORTX_CFG(x) (0x10100ULL | ((x) << 3))
+#define DPI_DMA_CCX_INT(x) (0x11000ULL | ((x) << 3))
+#define DPI_DMA_CCX_INT_ENA_W1C(x) (0x11800ULL | ((x) << 3))
+#define DPI_REQQX_INT(x) (0x12C00ULL | ((x) << 5))
+#define DPI_REQQX_INT_ENA_W1C(x) (0x13800ULL | ((x) << 5))
+#define DPI_MBOX_PF_VF_DATA0(x) (0x16000ULL | ((x) << 4))
+#define DPI_MBOX_PF_VF_DATA1(x) (0x16008ULL | ((x) << 4))
+
+#define DPI_WCTL_FIF_THR 0x17008ULL
+
+#define DPI_EBUS_MAX_PORTS 2
+
+#define DPI_EBUS_MRRS_MIN 128
+#define DPI_EBUS_MRRS_MAX 1024
+#define DPI_EBUS_MPS_MIN 128
+#define DPI_EBUS_MPS_MAX 1024
+#define DPI_WCTL_FIFO_THRESHOLD 0x30
+
+#define DPI_QUEUE_OPEN 0x1
+#define DPI_QUEUE_CLOSE 0x2
+#define DPI_REG_DUMP 0x3
+#define DPI_GET_REG_CFG 0x4
+#define DPI_QUEUE_OPEN_V2 0x5
+
+enum dpi_mbox_rsp_type {
+ DPI_MBOX_TYPE_CMD,
+ DPI_MBOX_TYPE_RSP_ACK,
+ DPI_MBOX_TYPE_RSP_NACK,
+};
+
+struct dpivf_config {
+ u32 aura;
+ u16 csize;
+ u16 sso_pf_func;
+ u16 npa_pf_func;
+};
+
+struct dpipf_vf {
+ struct dpivf_config vf_config;
+ bool setup_done;
+ u8 this_vfid;
+};
+
+/* DPI device mailbox */
+struct dpi_mbox {
+ struct work_struct work;
+ /* lock to serialize mbox requests */
+ struct mutex lock;
+ struct dpipf *pf;
+ u8 __iomem *pf_vf_data_reg;
+ u8 __iomem *vf_pf_data_reg;
+};
+
+struct dpipf {
+ struct miscdevice miscdev;
+ void __iomem *reg_base;
+ struct pci_dev *pdev;
+ struct dpipf_vf vf[DPI_MAX_VFS];
+ /* Mailbox to talk to VFs */
+ struct dpi_mbox *mbox[DPI_MAX_VFS];
+};
+
+union dpi_mbox_message {
+ u64 word[2];
+ struct {
+#if defined(__BIG_ENDIAN_BITFIELD)
+ /* SSO PF function */
+ u64 sso_pf_func :16;
+ /* Aura of the command buffer */
+ u64 aura :20;
+ /* Command buffer size in 8-byte words */
+ u64 csize :16;
+ /* Command code */
+ u64 cmd :4;
+ /* VF ID to configure */
+ u64 vfid :8;
+ /* Reserved for future use */
+ u64 rsvd_85_127 :40;
+ /* Work queue completion status byte offset */
+ u64 wqecsoff :7;
+ /* Work queue completion status enable */
+ u64 wqecs :1;
+ /* NPA PF function */
+ u64 npa_pf_func :16;
+#else
+ /* VF ID to configure */
+ u64 vfid :8;
+ /* Command code */
+ u64 cmd :4;
+ /* Command buffer size in 8-byte words */
+ u64 csize :16;
+ /* Aura of the command buffer */
+ u64 aura :20;
+ /* SSO PF function */
+ u64 sso_pf_func :16;
+ /* NPA PF function */
+ u64 npa_pf_func :16;
+ /* Work queue completion status enable */
+ u64 wqecs :1;
+ /* Work queue completion status byte offset */
+ u64 wqecsoff :7;
+ /* Reserved for future use */
+ u64 rsvd_85_127 :40;
+#endif
+ };
+};
+
+static inline void dpi_reg_write(struct dpipf *dpi, u64 offset, u64 val)
+{
+ writeq(val, dpi->reg_base + offset);
+}
+
+static inline u64 dpi_reg_read(struct dpipf *dpi, u64 offset)
+{
+ return readq(dpi->reg_base + offset);
+}
+
+static void dpi_wqe_cs_offset(struct dpipf *dpi, u8 offset)
+{
+ u64 reg;
+
+ reg = dpi_reg_read(dpi, DPI_DMA_CONTROL);
+ reg &= ~DPI_DMA_CONTROL_WQECSDIS;
+ reg |= DPI_DMA_CONTROL_ZBWCSEN | DPI_DMA_CONTROL_WQECSMODE1;
+ reg |= DPI_DMA_CONTROL_WQECSOFF(offset);
+ dpi_reg_write(dpi, DPI_DMA_CONTROL, reg);
+}
+
+static int dpi_queue_init(struct dpipf *dpi, struct dpipf_vf *dpivf, u8 vf)
+{
+ u16 sso_pf_func = dpivf->vf_config.sso_pf_func;
+ u16 npa_pf_func = dpivf->vf_config.npa_pf_func;
+ u16 csize = dpivf->vf_config.csize;
+ u32 aura = dpivf->vf_config.aura;
+ unsigned long timeout;
+ u64 reg;
+
+ dpi_reg_write(dpi, DPI_DMAX_QRST(vf), DPI_DMA_QRST);
+
+ /* Wait for a maximum of 3 sec */
+ timeout = jiffies + msecs_to_jiffies(3000);
+ while (!time_after(jiffies, timeout)) {
+ reg = dpi_reg_read(dpi, DPI_DMAX_QRST(vf));
+ if (!(reg & DPI_DMA_QRST))
+ break;
+
+ /* Reset would take time for the request cache to drain */
+ usleep_range(500, 1000);
+ }
+
+ if (reg & DPI_DMA_QRST) {
+ dev_err(&dpi->pdev->dev, "Queue reset failed\n");
+ return -EBUSY;
+ }
+
+ dpi_reg_write(dpi, DPI_DMAX_IDS2(vf), 0);
+ dpi_reg_write(dpi, DPI_DMAX_IDS(vf), 0);
+
+ reg = DPI_DMA_IBUFF_CSIZE_CSIZE(csize) | DPI_DMA_IBUFF_CSIZE_NPA_FREE;
+ dpi_reg_write(dpi, DPI_DMAX_IBUFF_CSIZE(vf), reg);
+
+ reg = dpi_reg_read(dpi, DPI_DMAX_IDS2(vf));
+ reg |= DPI_DMA_IDS2_INST_AURA(aura);
+ dpi_reg_write(dpi, DPI_DMAX_IDS2(vf), reg);
+
+ reg = dpi_reg_read(dpi, DPI_DMAX_IDS(vf));
+ reg |= DPI_DMA_IDS_DMA_NPA_PF_FUNC(npa_pf_func);
+ reg |= DPI_DMA_IDS_DMA_SSO_PF_FUNC(sso_pf_func);
+ reg |= DPI_DMA_IDS_DMA_STRM(vf + 1);
+ reg |= DPI_DMA_IDS_INST_STRM(vf + 1);
+ dpi_reg_write(dpi, DPI_DMAX_IDS(vf), reg);
+
+ return 0;
+}
+
+static void dpi_queue_fini(struct dpipf *dpi, struct dpipf_vf *dpivf, u8 vf)
+{
+ dpi_reg_write(dpi, DPI_DMAX_QRST(vf), DPI_DMA_QRST);
+
+ /* Reset IDS and IDS2 registers */
+ dpi_reg_write(dpi, DPI_DMAX_IDS2(vf), 0);
+ dpi_reg_write(dpi, DPI_DMAX_IDS(vf), 0);
+}
+
+static void dpi_poll_pfvf_mbox(struct dpipf *dpi)
+{
+ u64 reg;
+ u32 vf;
+
+ reg = dpi_reg_read(dpi, DPI_MBOX_VF_PF_INT);
+ if (reg) {
+ for (vf = 0; vf < pci_num_vf(dpi->pdev); vf++) {
+ if (reg & BIT_ULL(vf))
+ schedule_work(&dpi->mbox[vf]->work);
+ }
+ dpi_reg_write(dpi, DPI_MBOX_VF_PF_INT, reg);
+ }
+}
+
+static irqreturn_t dpi_mbox_intr_handler(int irq, void *data)
+{
+ struct dpipf *dpi = data;
+
+ dpi_poll_pfvf_mbox(dpi);
+
+ return IRQ_HANDLED;
+}
+
+static int queue_config(struct dpipf *dpi, struct dpipf_vf *dpivf, union dpi_mbox_message *msg)
+{
+ int ret = 0;
+
+ switch (msg->cmd) {
+ case DPI_QUEUE_OPEN:
+ case DPI_QUEUE_OPEN_V2:
+ dpivf->vf_config.aura = msg->aura;
+ dpivf->vf_config.csize = msg->cmd == DPI_QUEUE_OPEN ? msg->csize / 8 :
+ msg->csize;
+ dpivf->vf_config.sso_pf_func = msg->sso_pf_func;
+ dpivf->vf_config.npa_pf_func = msg->npa_pf_func;
+ ret = dpi_queue_init(dpi, dpivf, msg->vfid);
+ if (!ret) {
+ if (msg->wqecs)
+ dpi_wqe_cs_offset(dpi, msg->wqecsoff);
+ dpivf->setup_done = true;
+ }
+ break;
+ case DPI_QUEUE_CLOSE:
+ dpivf->vf_config.aura = 0;
+ dpivf->vf_config.csize = 0;
+ dpivf->vf_config.sso_pf_func = 0;
+ dpivf->vf_config.npa_pf_func = 0;
+ dpi_queue_fini(dpi, dpivf, msg->vfid);
+ dpivf->setup_done = false;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static void dpi_pfvf_mbox_work(struct work_struct *work)
+{
+ struct dpi_mbox *mbox = container_of(work, struct dpi_mbox, work);
+ union dpi_mbox_message msg;
+ struct dpipf_vf *dpivf;
+ struct dpipf *dpi;
+ int ret;
+
+ dpi = mbox->pf;
+ memset(&msg, 0, sizeof(msg));
+
+ mutex_lock(&mbox->lock);
+ msg.word[0] = readq(mbox->vf_pf_data_reg);
+ if (msg.word[0] == (u64)-1)
+ goto exit;
+
+ if (msg.vfid >= pci_num_vf(dpi->pdev))
+ goto exit;
+
+ dpivf = &dpi->vf[msg.vfid];
+ msg.word[1] = readq(mbox->pf_vf_data_reg);
+
+ ret = queue_config(dpi, dpivf, &msg);
+ if (ret < 0)
+ writeq(DPI_MBOX_TYPE_RSP_NACK, mbox->pf_vf_data_reg);
+ else
+ writeq(DPI_MBOX_TYPE_RSP_ACK, mbox->pf_vf_data_reg);
+exit:
+ mutex_unlock(&mbox->lock);
+}
+
+/* Setup registers for a PF mailbox */
+static void dpi_setup_mbox_regs(struct dpipf *dpi, int vf)
+{
+ struct dpi_mbox *mbox = dpi->mbox[vf];
+
+ mbox->pf_vf_data_reg = dpi->reg_base + DPI_MBOX_PF_VF_DATA0(vf);
+ mbox->vf_pf_data_reg = dpi->reg_base + DPI_MBOX_PF_VF_DATA1(vf);
+}
+
+static int dpi_pfvf_mbox_setup(struct dpipf *dpi)
+{
+ int vf;
+
+ for (vf = 0; vf < DPI_MAX_VFS; vf++) {
+ dpi->mbox[vf] = devm_kzalloc(&dpi->pdev->dev, sizeof(*dpi->mbox[vf]), GFP_KERNEL);
+
+ if (!dpi->mbox[vf])
+ return -ENOMEM;
+
+ mutex_init(&dpi->mbox[vf]->lock);
+ INIT_WORK(&dpi->mbox[vf]->work, dpi_pfvf_mbox_work);
+ dpi->mbox[vf]->pf = dpi;
+ dpi_setup_mbox_regs(dpi, vf);
+ }
+
+ return 0;
+}
+
+static void dpi_pfvf_mbox_destroy(struct dpipf *dpi)
+{
+ unsigned int vf;
+
+ for (vf = 0; vf < DPI_MAX_VFS; vf++) {
+ if (work_pending(&dpi->mbox[vf]->work))
+ cancel_work_sync(&dpi->mbox[vf]->work);
+
+ dpi->mbox[vf] = NULL;
+ }
+}
+
+static void dpi_init(struct dpipf *dpi)
+{
+ unsigned int engine, port;
+ u8 mrrs_val, mps_val;
+ u64 reg;
+
+ for (engine = 0; engine < DPI_MAX_ENGINES; engine++) {
+ if (engine == 4 || engine == 5)
+ reg = DPI_ENG_BUF_BLKS(16);
+ else
+ reg = DPI_ENG_BUF_BLKS(8);
+
+ dpi_reg_write(dpi, DPI_ENGX_BUF(engine), reg);
+ }
+
+ reg = DPI_DMA_CONTROL_ZBWCSEN | DPI_DMA_CONTROL_PKT_EN | DPI_DMA_CONTROL_LDWB |
+ DPI_DMA_CONTROL_O_MODE | DPI_DMA_CONTROL_DMA_ENB;
+
+ dpi_reg_write(dpi, DPI_DMA_CONTROL, reg);
+ dpi_reg_write(dpi, DPI_CTL, DPI_CTL_EN);
+
+ mrrs_val = 2; /* 512B */
+ mps_val = 1; /* 256B */
+
+ for (port = 0; port < DPI_EBUS_MAX_PORTS; port++) {
+ reg = dpi_reg_read(dpi, DPI_EBUS_PORTX_CFG(port));
+ reg &= ~(DPI_EBUS_PORTX_CFG_MRRS(7) | DPI_EBUS_PORTX_CFG_MPS(7));
+ reg |= DPI_EBUS_PORTX_CFG_MPS(mps_val) | DPI_EBUS_PORTX_CFG_MRRS(mrrs_val);
+ dpi_reg_write(dpi, DPI_EBUS_PORTX_CFG(port), reg);
+ }
+
+ dpi_reg_write(dpi, DPI_WCTL_FIF_THR, DPI_WCTL_FIFO_THRESHOLD);
+}
+
+static void dpi_fini(struct dpipf *dpi)
+{
+ unsigned int engine;
+
+ for (engine = 0; engine < DPI_MAX_ENGINES; engine++)
+ dpi_reg_write(dpi, DPI_ENGX_BUF(engine), 0);
+
+ dpi_reg_write(dpi, DPI_DMA_CONTROL, 0);
+ dpi_reg_write(dpi, DPI_CTL, 0);
+}
+
+static void dpi_free_irq_vectors(void *pdev)
+{
+ pci_free_irq_vectors((struct pci_dev *)pdev);
+}
+
+static int dpi_irq_init(struct dpipf *dpi)
+{
+ struct pci_dev *pdev = dpi->pdev;
+ struct device *dev = &pdev->dev;
+ int i, ret;
+
+ /* Clear all RAS interrupts */
+ dpi_reg_write(dpi, DPI_PF_RAS, DPI_PF_RAS_INT);
+
+ /* Clear all RAS interrupt enable bits */
+ dpi_reg_write(dpi, DPI_PF_RAS_ENA_W1C, DPI_PF_RAS_INT);
+
+ for (i = 0; i < DPI_MAX_REQQ_INT; i++) {
+ dpi_reg_write(dpi, DPI_REQQX_INT(i), DPI_REQQ_INT);
+ dpi_reg_write(dpi, DPI_REQQX_INT_ENA_W1C(i), DPI_REQQ_INT);
+ }
+
+ for (i = 0; i < DPI_MAX_CC_INT; i++) {
+ dpi_reg_write(dpi, DPI_DMA_CCX_INT(i), DPI_DMA_CC_INT);
+ dpi_reg_write(dpi, DPI_DMA_CCX_INT_ENA_W1C(i), DPI_DMA_CC_INT);
+ }
+
+ ret = pci_alloc_irq_vectors(pdev, DPI_MAX_IRQS, DPI_MAX_IRQS, PCI_IRQ_MSIX);
+ if (ret != DPI_MAX_IRQS) {
+ dev_err(dev, "DPI: Failed to alloc %d msix irqs\n", DPI_MAX_IRQS);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, dpi_free_irq_vectors, pdev);
+ if (ret) {
+ dev_err(dev, "DPI: Failed to add irq free action\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(dev, pci_irq_vector(pdev, DPI_MBOX_PF_VF_INT_IDX),
+ dpi_mbox_intr_handler, 0, "dpi-mbox", dpi);
+ if (ret) {
+ dev_err(dev, "DPI: request_irq failed for mbox; err=%d\n", ret);
+ return ret;
+ }
+
+ dpi_reg_write(dpi, DPI_MBOX_VF_PF_INT_ENA_W1S, GENMASK_ULL(31, 0));
+
+ return 0;
+}
+
+static int dpi_mps_mrrs_config(struct dpipf *dpi, void __user *arg)
+{
+ struct dpi_mps_mrrs_cfg cfg;
+ u8 mrrs_val, mps_val;
+ u64 reg;
+
+ if (copy_from_user(&cfg, arg, sizeof(struct dpi_mps_mrrs_cfg)))
+ return -EFAULT;
+
+ if (cfg.max_read_req_sz < DPI_EBUS_MRRS_MIN || cfg.max_read_req_sz > DPI_EBUS_MRRS_MAX ||
+ !is_power_of_2(cfg.max_read_req_sz))
+ return -EINVAL;
+
+ if (cfg.max_payload_sz < DPI_EBUS_MPS_MIN || cfg.max_payload_sz > DPI_EBUS_MPS_MAX ||
+ !is_power_of_2(cfg.max_payload_sz))
+ return -EINVAL;
+
+ if (cfg.port >= DPI_EBUS_MAX_PORTS)
+ return -EINVAL;
+
+ mrrs_val = fls(cfg.max_read_req_sz >> 8);
+ mps_val = fls(cfg.max_payload_sz >> 8);
+
+ reg = dpi_reg_read(dpi, DPI_EBUS_PORTX_CFG(cfg.port));
+ reg &= ~(DPI_EBUS_PORTX_CFG_MRRS(0x7) | DPI_EBUS_PORTX_CFG_MPS(0x7));
+ reg |= DPI_EBUS_PORTX_CFG_MPS(mps_val) | DPI_EBUS_PORTX_CFG_MRRS(mrrs_val);
+ dpi_reg_write(dpi, DPI_EBUS_PORTX_CFG(cfg.port), reg);
+
+ return 0;
+}
+
+static int dpi_engine_config(struct dpipf *dpi, void __user *arg)
+{
+ struct dpi_engine_cfg cfg;
+ unsigned int engine;
+ u8 *eng_buf;
+ u64 reg;
+
+ if (copy_from_user(&cfg, arg, sizeof(struct dpi_engine_cfg)))
+ return -EFAULT;
+
+ eng_buf = (u8 *)&cfg.fifo_mask;
+
+ for (engine = 0; engine < DPI_MAX_ENGINES; engine++) {
+ if (eng_buf[engine] > DPI_MAX_ENG_FIFO_SZ)
+ return -EINVAL;
+ dpi_reg_write(dpi, DPI_ENGX_BUF(engine), eng_buf[engine]);
+
+ if (cfg.update_molr) {
+ if (cfg.molr[engine] > DPI_MAX_ENG_MOLR)
+ return -EINVAL;
+ reg = DPI_DMA_ENG_EN_MOLR(cfg.molr[engine]);
+ dpi_reg_write(dpi, DPI_DMA_ENGX_EN(engine), reg);
+ }
+ }
+
+ return 0;
+}
+
+static long dpi_dev_ioctl(struct file *fptr, unsigned int cmd, unsigned long data)
+{
+ void __user *arg = (void __user *)data;
+ struct dpipf *dpi;
+ int ret;
+
+ dpi = container_of(fptr->private_data, struct dpipf, miscdev);
+
+ switch (cmd) {
+ case DPI_MPS_MRRS_CFG:
+ ret = dpi_mps_mrrs_config(dpi, arg);
+ break;
+ case DPI_ENGINE_CFG:
+ ret = dpi_engine_config(dpi, arg);
+ break;
+ default:
+ ret = -ENOTTY;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct file_operations dpi_device_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = dpi_dev_ioctl,
+ .compat_ioctl = compat_ptr_ioctl,
+};
+
+static int dpi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct device *dev = &pdev->dev;
+ struct dpipf *dpi;
+ int ret;
+
+ dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL);
+ if (!dpi)
+ return -ENOMEM;
+
+ dpi->pdev = pdev;
+
+ ret = pcim_enable_device(pdev);
+ if (ret) {
+ dev_err(dev, "DPI: Failed to enable PCI device\n");
+ return ret;
+ }
+
+ ret = pcim_iomap_regions(pdev, BIT(0) | BIT(4), KBUILD_MODNAME);
+ if (ret) {
+ dev_err(dev, "DPI: Failed to request MMIO region\n");
+ return ret;
+ }
+
+ dpi->reg_base = pcim_iomap_table(pdev)[PCI_DPI_CFG_BAR];
+
+ /* Initialize global PF registers */
+ dpi_init(dpi);
+
+ /* Setup PF-VF mailbox */
+ ret = dpi_pfvf_mbox_setup(dpi);
+ if (ret) {
+ dev_err(dev, "DPI: Failed to setup pf-vf mbox\n");
+ goto err_dpi_fini;
+ }
+
+ /* Register interrupts */
+ ret = dpi_irq_init(dpi);
+ if (ret) {
+ dev_err(dev, "DPI: Failed to initialize irq vectors\n");
+ goto err_dpi_mbox_free;
+ }
+
+ pci_set_drvdata(pdev, dpi);
+ dpi->miscdev.minor = MISC_DYNAMIC_MINOR;
+ dpi->miscdev.name = KBUILD_MODNAME;
+ dpi->miscdev.fops = &dpi_device_fops;
+ dpi->miscdev.parent = dev;
+
+ ret = misc_register(&dpi->miscdev);
+ if (ret) {
+ dev_err(dev, "DPI: Failed to register misc device\n");
+ goto err_dpi_mbox_free;
+ }
+
+ return 0;
+
+err_dpi_mbox_free:
+ dpi_pfvf_mbox_destroy(dpi);
+err_dpi_fini:
+ dpi_fini(dpi);
+ return ret;
+}
+
+static void dpi_remove(struct pci_dev *pdev)
+{
+ struct dpipf *dpi = pci_get_drvdata(pdev);
+
+ misc_deregister(&dpi->miscdev);
+ pci_sriov_configure_simple(pdev, 0);
+ dpi_pfvf_mbox_destroy(dpi);
+ dpi_fini(dpi);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static const struct pci_device_id dpi_id_table[] = {
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_MRVL_CN10K_DPI_PF,
+ PCI_VENDOR_ID_CAVIUM, PCI_SUBDEVID_MRVL_CN10K_DPI_PF) },
+ { 0, } /* end of table */
+};
+
+static struct pci_driver dpi_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = dpi_id_table,
+ .probe = dpi_probe,
+ .remove = dpi_remove,
+ .sriov_configure = pci_sriov_configure_simple,
+};
+
+module_pci_driver(dpi_driver);
+MODULE_DEVICE_TABLE(pci, dpi_id_table);
+MODULE_AUTHOR("Marvell.");
+MODULE_DESCRIPTION("Marvell Octeon CN10K DPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/uapi/misc/mrvl_cn10k_dpi.h b/include/uapi/misc/mrvl_cn10k_dpi.h
new file mode 100644
index 000000000000..d27b1bd8cd8d
--- /dev/null
+++ b/include/uapi/misc/mrvl_cn10k_dpi.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Marvell Octeon CN10K DPI driver
+ *
+ * Copyright (C) 2024 Marvell.
+ *
+ */
+
+#ifndef __MRVL_CN10K_DPI_H__
+#define __MRVL_CN10K_DPI_H__
+
+#include <linux/types.h>
+
+#define DPI_MAX_ENGINES 6
+
+struct dpi_mps_mrrs_cfg {
+ __u16 max_read_req_sz; /* Max read request size */
+ __u16 max_payload_sz; /* Max payload size */
+ __u8 port; /* Ebus port */
+};
+
+struct dpi_engine_cfg {
+ __u64 fifo_mask; /* FIFO size mask in KBytes */
+ __u16 molr[DPI_MAX_ENGINES]; /* Max outstanding load requests */
+ __u8 update_molr; /* '1' to update engine MOLR */
+};
+
+/* DPI ioctl numbers */
+#define DPI_MAGIC_NUM 0xB8
+
+/* Set MPS & MRRS parameters */
+#define DPI_MPS_MRRS_CFG _IOW(DPI_MAGIC_NUM, 1, struct dpi_mps_mrrs_cfg)
+
+/* Set Engine FIFO configuration */
+#define DPI_ENGINE_CFG _IOW(DPI_MAGIC_NUM, 2, struct dpi_engine_cfg)
+
+#endif /* __MRVL_CN10K_DPI_H__ */
--
2.25.1
Powered by blists - more mailing lists