linux-kernel - [PATCH] dt-bindings: clock: milbeaut: Drop providers and consumers from example

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240520222646.1741958-1-robh@kernel.org>
Date: Mon, 20 May 2024 17:26:45 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Taichi Sugaya <sugaya.taichi@...ionext.com>,
	Takao Orito <orito.takao@...ionext.com>
Cc: linux-clk@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH] dt-bindings: clock: milbeaut: Drop providers and consumers from example

Convention for examples is to only show what's covered by the binding,
so drop the consumer "socionext,milbeaut-usio-uart" and input clock
provider "fixed-clock" from the example. "socionext,milbeaut-usio-uart"
is also not documented by a schema which caused a warning.

Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
 .../bindings/clock/milbeaut-clock.yaml        | 29 +------------------
 1 file changed, 1 insertion(+), 28 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
index 0af1c569eb32..d786f1e2d007 100644
--- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -40,38 +40,11 @@ required:
 additionalProperties: false
 
 examples:
-  # Clock controller node:
   - |
-    m10v-clk-ctrl@...21000 {
+    clock-controller@...21000 {
         compatible = "socionext,milbeaut-m10v-ccu";
         reg = <0x1d021000 0x4000>;
         #clock-cells = <1>;
         clocks = <&clki40mhz>;
     };
-
-  # Required an external clock for Clock controller node:
-  - |
-    clocks {
-        clki40mhz: clki40mhz {
-            compatible = "fixed-clock";
-            #clock-cells = <0>;
-            clock-frequency = <40000000>;
-        };
-        /* other clocks */
-    };
-
-  # The clock consumer shall specify the desired clock-output of the clock
-  # controller as below by specifying output-id in its "clk" phandle cell.
-  # 2: uart
-  # 4: 32-bit timer
-  # 7: UHS-I/II
-  - |
-    serial@...00010 {
-        compatible = "socionext,milbeaut-usio-uart";
-        reg = <0x1e700010 0x10>;
-        interrupts = <0 141 0x4>, <0 149 0x4>;
-        interrupt-names = "rx", "tx";
-        clocks = <&clk 2>;
-    };
-
 ...
-- 
2.43.0