| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 22 May 2024 17:04:37 +0800
From: Victor Shih <victorshihgli@...il.com>
To: Adrian Hunter <adrian.hunter@...el.com>
Cc: ulf.hansson@...aro.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, benchuanggli@...il.com,
HL.Liu@...esyslogic.com.tw, Greg.tu@...esyslogic.com.tw,
takahiro.akashi@...aro.org, dlunev@...omium.org,
Jason Lai <jason.lai@...esyslogic.com.tw>,
Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: Re: [PATCH V14 07/21] mmc: core: Support UHS-II card control and access
On Tue, Jan 30, 2024 at 5:36 PM Adrian Hunter <adrian.hunter@...el.com> wrote:
>
> On 27/01/24 10:28, Victor Shih wrote:
> > On Tue, Jan 23, 2024 at 2:28 PM Victor Shih <victorshihgli@...il.com> wrote:
> >>
> >> From: Victor Shih <victor.shih@...esyslogic.com.tw>
> >>
> >> Embed UHS-II access/control functionality into the MMC request
> >> processing flow.
> >>
> >> Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
> >> Signed-off-by: Jason Lai <jason.lai@...esyslogic.com.tw>
> >> Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
> >> ---
> >>
> >> Updates in V13:
> >> - Separate __mmc_go_idle() into one patch for re-factorring the code.
> >> - Move mmc_decode_scr declaration to sd.h.
> >> - Ues uhs2_sd_tran to stead MMC_UHS2_SD_TRAN.
> >> - Drop unnecessary comment.
> >>
> >> Updates in V12:
> >> - Use mmc_op_multi() to check DCMD which supports multi read/write
> >> in mmc_uhs2_prepare_cmd().
> >>
> >> Updates in V10:
> >> - Move some definitions of PatchV9[02/23] to PatchV10[06/23].
> >> - Move some definitions of PatchV9[05/23] to PatchV10[06/23].
> >> - Drop do_multi in the mmc_blk_rw_rq_prep().
> >> - Use tmode_half_duplex to instead of uhs2_tmode0_flag.
> >> - Move entire control of the tmode into mmc_uhs2_prepare_cmd().
> >>
> >> Updates in V8:
> >> - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
> >> - Modify return value in sd_uhs2_attach().
> >>
> >> Updates in V7:
> >> - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
> >> - Drop uhs2_state in favor of ios->timing.
> >> - Remove unnecessary functions.
> >>
> >> ---
> >>
> >> drivers/mmc/core/core.c | 10 +-
> >> drivers/mmc/core/sd.c | 10 +-
> >> drivers/mmc/core/sd.h | 5 +
> >> drivers/mmc/core/sd_ops.c | 9 +
> >> drivers/mmc/core/sd_ops.h | 17 +
> >> drivers/mmc/core/sd_uhs2.c | 1115 ++++++++++++++++++++++++++++++++++--
> >> include/linux/mmc/core.h | 13 +
> >> include/linux/mmc/host.h | 15 +
> >> 8 files changed, 1155 insertions(+), 39 deletions(-)
> >>
> >> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> >> index 2edf31492a5d..be77cebe1fb8 100644
> >> --- a/drivers/mmc/core/core.c
> >> +++ b/drivers/mmc/core/core.c
> >> @@ -334,6 +334,8 @@ static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)
> >>
> >> int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> >> {
> >> + struct uhs2_command uhs2_cmd;
> >> + __be32 payload[4]; /* for maximum size */
> >> int err;
> >>
> >> init_completion(&mrq->cmd_completion);
> >> @@ -351,6 +353,8 @@ int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> >> if (err)
> >> return err;
> >>
> >> + mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> >> +
> >> led_trigger_event(host->led, LED_FULL);
> >> __mmc_start_request(host, mrq);
> >>
> >
> > Hi, Adrian
> >
> > I referenced your comments of the V9:
> >
> > Refer:
> > https://patchwork.kernel.org/project/linux-mmc/patch/20230721101349.12387-7-victorshihgli@gmail.com/
> >
> > My understanding is as follows, please correct me if there are any mistakes.
> > There is already "struct uhs2_command *uhs2_cmd" in struct mmc_command.
> > If I also put "__be32 payload[4]" in struct mmc_command.
> > The code will become:
> > mmc_uhs2_card_prepare_cmd(host, mrq, *mrq->cmd->uhs2_cmd, mrq->cmd->payload);
> > But a null pointer problem occurs when sending commands like COM0(mmc_go_idle).
> > In this case I just can only plan for the time being as follows:
> >
> > if (mrq->cmd->uhs2_cmd)
> > mmc_uhs2_card_prepare_cmd(host, mrq, *mrq->cmd->uhs2_cmd,
> > mrq->cmd->payload);
> > else
> > mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> >
> > Would you give me any other advice?
>
> struct uhs2_command uhs2_cmd should not be on the stack local to
> mmc_start_request(). Probably moving it to struct mmc_request
> is as good as any other option. So starting like below and
> then with whatever other changes are needed to make it work.
>
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index be77cebe1fb8..68496c51a521 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -334,8 +334,6 @@ static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)
>
> int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> {
> - struct uhs2_command uhs2_cmd;
> - __be32 payload[4]; /* for maximum size */
> int err;
>
> init_completion(&mrq->cmd_completion);
> @@ -353,7 +351,7 @@ int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> if (err)
> return err;
>
> - mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> + mmc_uhs2_card_prepare_cmd(host, mrq);
>
> led_trigger_event(host->led, LED_FULL);
> __mmc_start_request(host, mrq);
> @@ -434,8 +432,6 @@ EXPORT_SYMBOL(mmc_wait_for_req_done);
> */
> int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
> {
> - struct uhs2_command uhs2_cmd;
> - __be32 payload[4]; /* for maximum size */
> int err;
>
> /*
> @@ -456,7 +452,7 @@ int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
> if (err)
> goto out_err;
>
> - mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> + mmc_uhs2_card_prepare_cmd(host, mrq);
>
> err = host->cqe_ops->cqe_request(host, mrq);
> if (err)
> diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
> index d3a3465c7669..e3af68a52de8 100644
> --- a/drivers/mmc/core/sd_ops.h
> +++ b/drivers/mmc/core/sd_ops.h
> @@ -24,14 +24,10 @@ int mmc_app_sd_status(struct mmc_card *card, void *ssr);
> int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
> void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq);
>
> -static inline void mmc_uhs2_card_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq,
> - struct uhs2_command uhs2_cmd, __be32 payload[4])
> +static inline void mmc_uhs2_card_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq)
> {
> - if (host->uhs2_sd_tran) {
> - uhs2_cmd.payload = payload;
> - mrq->cmd->uhs2_cmd = &uhs2_cmd;
> + if (host->uhs2_sd_tran)
> mmc_uhs2_prepare_cmd(host, mrq);
> - }
> }
>
> static inline int mmc_sd_can_poweroff_notify(struct mmc_card *card)
> diff --git a/drivers/mmc/core/sd_uhs2.c b/drivers/mmc/core/sd_uhs2.c
> index c46729d85644..9cabb6937dc1 100644
> --- a/drivers/mmc/core/sd_uhs2.c
> +++ b/drivers/mmc/core/sd_uhs2.c
> @@ -1194,6 +1194,7 @@ void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq)
> u8 plen;
>
> cmd = mrq->cmd;
> + cmd->uhs2_cmd = &mrq->uhs2_cmd;
> header = host->card->uhs2_config.node_id;
> if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
> header |= UHS2_PACKET_TYPE_DCMD;
> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
> index f30f6be86f66..83c901794c17 100644
> --- a/include/linux/mmc/core.h
> +++ b/include/linux/mmc/core.h
> @@ -23,13 +23,18 @@ enum mmc_blk_status {
> MMC_BLK_NEW_REQUEST,
> };
>
> +#define UHS2_MAX_PAYLOAD_LEN 2
> +#define UHS2_MAX_RESP_LEN 20
> +
> struct uhs2_command {
> u16 header;
> u16 arg;
> - __be32 *payload;
> - u32 payload_len;
> - u32 packet_len;
> + __be32 payload[UHS2_MAX_PAYLOAD_LEN];
> + u8 payload_len;
> + u8 packet_len; // TODO: is this really needed?
> u8 tmode_half_duplex;
> + u8 uhs2_resp_len; /* UHS2 native cmd resp len */
> + u8 uhs2_resp[UHS2_MAX_RESP_LEN]; /* UHS2 native cmd resp */
> };
>
> struct mmc_command {
> @@ -119,8 +124,6 @@ struct mmc_command {
> struct mmc_request *mrq; /* associated request */
>
> struct uhs2_command *uhs2_cmd; /* UHS2 command */
> - u8 *uhs2_resp; /* UHS2 native cmd resp */
> - u8 uhs2_resp_len; /* UHS2 native cmd resp len */
> };
>
> struct mmc_data {
> @@ -179,6 +182,7 @@ struct mmc_request {
> const struct bio_crypt_ctx *crypto_ctx;
> int crypto_key_slot;
> #endif
> + struct uhs2_command uhs2_cmd;
> };
>
> struct mmc_card;
>
>
>
Hi, Adrian
I have modified the above into patch#7 and patch#16 in the patch series v15.
But I will submit the patch series v16 later.
Please help review the changes in patch series v16.
Thanks, Victor Shih
Powered by blists - more mailing lists