[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<NTZPR01MB0956170B9324DBA549B6BF679FEB2@NTZPR01MB0956.CHNPR01.prod.partner.outlook.cn>
Date: Wed, 22 May 2024 08:35:25 +0000
From: Xingyu Wu <xingyu.wu@...rfivetech.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, Liam Girdwood
<lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, Takashi Iwai
<tiwai@...e.com>, Jaroslav Kysela <perex@...ex.cz>, Rob Herring
<robh+dt@...nel.org>, Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>, Conor Dooley
<conor.dooley@...rochip.com>
CC: Walker Chen <walker.chen@...rfivetech.com>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "alsa-devel@...a-project.org"
<alsa-devel@...a-project.org>, "linux-sound@...r.kernel.org"
<linux-sound@...r.kernel.org>
Subject: RE: [PATCH v2 1/2] ASoC: dt-bindings: Add PDM controller for the
StarFive JH8100 SoC
>
> On 23/04/2024 10:34, Krzysztof Kozlowski wrote:
> >
> > On 23/04/2024 10:34, Xingyu Wu wrote:
> > > Add bindings about the PDM controller for the StarFive JH8100 SoC.
> > >
> > > Signed-off-by: Xingyu Wu <xingyu.wu@...rfivetech.com>
> >
> > If there is going to be resend/new version, three nits. Anyway:
> >
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> >
>
> I will fix it in next version. Thanks.
>
> > ...
> >
> > > +
> > > +title: StarFive JH8100 PDM controller
> > > +
> > > +description: |
> >
> > Do not need '|' unless you need to preserve formatting.
>
> Will drop.
>
> >
> > > + The Pulse Density Modulation (PDM) controller is a digital PDM
> > > + out microphone interface controller and decoder that supports both
> > > + up to
> > > + 4 channels, and an Inter-IC Sound (I2S) transmitter that outputs
> > > + standard stereo audio data to another device. The I2S transmitter
> > > + can be configured to operate either a master or a slave (default
> > > + mode). The PDM controller includes two PDM blocks, each PDM block
> > > + can drive one bitstream sampling clock and two bitstream coming
> > > + data (mono/stereo) with sampling clock rising and falling edge.
> > > +
> > > +maintainers:
> > > + - Xingyu Wu <xingyu.wu@...rfivetech.com>
> > > + - Walker Chen <walker.chen@...rfivetech.com>
> > > +
> > > +allOf:
> > > + - $ref: dai-common.yaml#
> > > +
> > > +properties:
> > > + compatible:
> > > + const: starfive,jh8100-pdm
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + clocks:
> > > + items:
> > > + - description: DMIC output clock
> > > + - description: Main ICG clock
> > > +
> > > + clock-names:
> > > + items:
> > > + - const: dmic
> > > + - const: icg
> > > +
> > > + resets:
> > > + maxItems: 1
> > > +
> > > + "#sound-dai-cells":
> > > + const: 0
> > > +
> > > + starfive,syscon:
> > > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > > + items:
> > > + - items:
> > > + - description: phandle to System Register Controller sys_syscon_ne
> node.
> > > + - description: PDM source enabled control offset of
> > > + SYS_SYSCON_NE
> > register.
> > > + - description: PDM source enabled control mask
> > > + description:
> > > + The phandle to System Register Controller syscon node and the
> > > + PDM
> > source
> > > + from I2S enabled control offset and mask of SYS_SYSCON_NE register.
> >
> > This description duplicates items. Drop redundant parts (there is
> > really never a need to say phandle is a phandle because it cannot be
> > anything else). Instead say what is it used for.
>
> Will fix.
>
> >
> >
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - clocks
> > > + - clock-names
> > > + - resets
> > > + - '#sound-dai-cells'
> >
> > Use consistent quotes, either ' or "
> >
>
> Will fix.
>
> Best regards,
> Xingyu Wu
Sorry, it was resent. Forget that.
Thanks,
Xingyu Wu
Powered by blists - more mailing lists