[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdWS8TNVjd6UBYe1X7p=aVVFBBErh8StL1urJL7w_WYLzA@mail.gmail.com>
Date: Wed, 22 May 2024 15:26:02 +0200
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Prabhakar <prabhakar.csengg@...il.com>
Cc: Linus Walleij <linus.walleij@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Magnus Damm <magnus.damm@...il.com>, linux-renesas-soc@...r.kernel.org,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH v2 10/13] pinctrl: renesas: pinctrl-rzg2l: Add support to
set pulling up/down the pins
On Tue, Apr 23, 2024 at 7:59 PM Prabhakar <prabhakar.csengg@...il.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
>
> Add support to configure bias-disable, bias-pull-up and bias-pull-down
> properties of the pin.
>
> Two new function pointers get_bias_param() and get_bias_val() are
> introduced as the values in PUPD register differ when compared to
> RZ/G2L family and RZ/V2H(P) SoC,
>
> Value | RZ/G2L | RZ/V2H
> ---------------------------------
> 00b: | Bias Disabled | Pull up/down disabled
> 01b: | Pull-up | Pull up/down disabled
> 10b: | Pull-down | Pull-down
> 11b: | Prohibited | Pull-up
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> ---
> RFC->v2
> - New patch
> ---
> drivers/pinctrl/renesas/pinctrl-rzg2l.c | 73 +++++++++++++++++++++++++
> 1 file changed, 73 insertions(+)
>
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> index 102fa75c71d3..c144bf43522b 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -122,6 +122,7 @@
> #define IOLH(off) (0x1000 + (off) * 8)
> #define SR(off) (0x1400 + (off) * 8)
> #define IEN(off) (0x1800 + (off) * 8)
> +#define PUPD(off) (0x1C00 + (off) * 8)
> #define ISEL(off) (0x2C00 + (off) * 8)
> #define SD_CH(off, ch) ((off) + (ch) * 4)
> #define ETH_POC(off, ch) ((off) + (ch) * 4)
> @@ -140,6 +141,7 @@
> #define IEN_MASK 0x01
> #define IOLH_MASK 0x03
> #define SR_MASK 0x01
> +#define PUPD_MASK 0x03
>
> #define PM_INPUT 0x1
> #define PM_OUTPUT 0x2
> @@ -265,6 +267,8 @@ struct rzg2l_pinctrl_data {
> void (*pmc_writeb)(struct rzg2l_pinctrl *pctrl, u8 val, void __iomem *addr);
> u32 (*read_oen)(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8 pin);
> int (*write_oen)(struct rzg2l_pinctrl *pctrl, u32 caps, u32 offset, u8 pin, u8 oen);
> + int (*get_bias_param)(u8 val);
> + int (*get_bias_val)(enum pin_config_param param);
Please use consistent naming: "pmc_writeb" uses <noun>_<verb> ordering,
"get_bias_pararm" uses <verb>_<noun> ordering.
Perhaps "hw_to_bias_param()" and "bias_param_to_hw()?"
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68korg
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists