| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 22 May 2024 17:01:38 +0200
From: Angelo Dureghello <adureghello@...libre.com>
To: jic23@...nel.org,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org
Cc: nuno.sa@...log.com,
lars@...afoo.de,
Michael.Hennerich@...log.com,
linux-iio@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Angelo Dureghello <adureghello@...libre.com>
Subject: [PATCH v2 3/6] iio: dac: ad3552r: add model data structure
From: Angelo Dureghello <adureghello@...libre.com>
Add a "model data" structure to keep useful hardware-related
information as from datasheet, avoiding id-based conditional
choices later on.
Removed id-based checks and filled model-specific structures
with device specific features, In particular, num_hw_channels
is introduced to keep the number of hardware implemented
channels, since 1-channel versions of the DACs are added
in this same patchset.
Signed-off-by: Angelo Dureghello <adureghello@...libre.com>
---
Changes for v2:
- patch added in v2
---
drivers/iio/dac/ad3552r.c | 98 +++++++++++++++++++++++----------------
1 file changed, 59 insertions(+), 39 deletions(-)
diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
index a492e8f2fc0f..6a40c7eece1f 100644
--- a/drivers/iio/dac/ad3552r.c
+++ b/drivers/iio/dac/ad3552r.c
@@ -261,7 +261,17 @@ struct ad3552r_ch_data {
bool range_override;
};
+struct ad3552r_model_data {
+ const char *model_name;
+ enum ad3542r_id chip_id;
+ unsigned int num_hw_channels;
+ const s32 (*ranges_table)[2];
+ int num_ranges;
+ bool requires_output_range;
+};
+
struct ad3552r_desc {
+ const struct ad3552r_model_data *model_data;
/* Used to look the spi bus for atomic operations where needed */
struct mutex lock;
struct gpio_desc *gpio_reset;
@@ -271,7 +281,6 @@ struct ad3552r_desc {
struct iio_chan_spec channels[AD3552R_NUM_CH + 1];
unsigned long enabled_ch;
unsigned int num_ch;
- enum ad3542r_id chip_id;
};
static const u16 addr_mask_map[][2] = {
@@ -745,13 +754,8 @@ static void ad3552r_calc_gain_and_offset(struct ad3552r_desc *dac, s32 ch)
} else {
/* Normal range */
idx = dac->ch_data[ch].range;
- if (dac->chip_id == AD3542R_ID) {
- v_min = ad3542r_ch_ranges[idx][0];
- v_max = ad3542r_ch_ranges[idx][1];
- } else {
- v_min = ad3552r_ch_ranges[idx][0];
- v_max = ad3552r_ch_ranges[idx][1];
- }
+ v_min = dac->model_data->ranges_table[idx][0];
+ v_max = dac->model_data->ranges_table[idx][1];
}
/*
@@ -775,22 +779,14 @@ static void ad3552r_calc_gain_and_offset(struct ad3552r_desc *dac, s32 ch)
dac->ch_data[ch].offset_dec = div_s64(tmp, span);
}
-static int ad3552r_find_range(u16 id, s32 *vals)
+static int ad3552r_find_range(const struct ad3552r_model_data *model_data,
+ s32 *vals)
{
- int i, len;
- const s32 (*ranges)[2];
+ int i;
- if (id == AD3542R_ID) {
- len = ARRAY_SIZE(ad3542r_ch_ranges);
- ranges = ad3542r_ch_ranges;
- } else {
- len = ARRAY_SIZE(ad3552r_ch_ranges);
- ranges = ad3552r_ch_ranges;
- }
-
- for (i = 0; i < len; i++)
- if (vals[0] == ranges[i][0] * 1000 &&
- vals[1] == ranges[i][1] * 1000)
+ for (i = 0; i < model_data->num_ranges; i++)
+ if (vals[0] == model_data->ranges_table[i][0] * 1000 &&
+ vals[1] == model_data->ranges_table[i][1] * 1000)
return i;
return -EINVAL;
@@ -955,9 +951,9 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
dev_err(dev, "mandatory reg property missing\n");
goto put_child;
}
- if (ch >= AD3552R_NUM_CH) {
+ if (ch >= dac->model_data->num_hw_channels) {
dev_err(dev, "reg must be less than %d\n",
- AD3552R_NUM_CH);
+ dac->model_data->num_hw_channels);
err = -EINVAL;
goto put_child;
}
@@ -973,7 +969,7 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
goto put_child;
}
- err = ad3552r_find_range(dac->chip_id, vals);
+ err = ad3552r_find_range(dac->model_data, vals);
if (err < 0) {
dev_err(dev,
"Invalid adi,output-range-microvolt value\n");
@@ -987,9 +983,10 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
goto put_child;
dac->ch_data[ch].range = val;
- } else if (dac->chip_id == AD3542R_ID) {
+ } else if (dac->model_data->requires_output_range) {
dev_err(dev,
- "adi,output-range-microvolt is required for ad3542r\n");
+ "adi,output-range-microvolt is required for %s\n",
+ dac->model_data->model_name);
err = -EINVAL;
goto put_child;
} else {
@@ -1011,7 +1008,8 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
}
/* Disable unused channels */
- for_each_clear_bit(ch, &dac->enabled_ch, AD3552R_NUM_CH) {
+ for_each_clear_bit(ch, &dac->enabled_ch,
+ dac->model_data->num_hw_channels) {
err = ad3552r_set_ch_value(dac, AD3552R_CH_AMPLIFIER_POWERDOWN,
ch, 1);
if (err)
@@ -1058,7 +1056,7 @@ static int ad3552r_init(struct ad3552r_desc *dac)
}
id |= val << 8;
- if (id != dac->chip_id) {
+ if (id != dac->model_data->chip_id) {
dev_err(&dac->spi->dev, "Product id not matching\n");
return -ENODEV;
}
@@ -1068,7 +1066,6 @@ static int ad3552r_init(struct ad3552r_desc *dac)
static int ad3552r_probe(struct spi_device *spi)
{
- const struct spi_device_id *id = spi_get_device_id(spi);
struct ad3552r_desc *dac;
struct iio_dev *indio_dev;
int err;
@@ -1079,7 +1076,9 @@ static int ad3552r_probe(struct spi_device *spi)
dac = iio_priv(indio_dev);
dac->spi = spi;
- dac->chip_id = id->driver_data;
+ dac->model_data = spi_get_device_match_data(spi);
+ if (!dac->model_data)
+ return -EINVAL;
mutex_init(&dac->lock);
@@ -1088,10 +1087,7 @@ static int ad3552r_probe(struct spi_device *spi)
return err;
/* Config triggered buffer device */
- if (dac->chip_id == AD3552R_ID)
- indio_dev->name = "ad3552r";
- else
- indio_dev->name = "ad3542r";
+ indio_dev->name = dac->model_data->model_name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &ad3552r_iio_info;
indio_dev->num_channels = dac->num_ch;
@@ -1109,16 +1105,40 @@ static int ad3552r_probe(struct spi_device *spi)
return devm_iio_device_register(&spi->dev, indio_dev);
}
+static const struct ad3552r_model_data ad3542r_model_data = {
+ .model_name = "ad3542r",
+ .chip_id = AD3542R_ID,
+ .num_hw_channels = 2,
+ .ranges_table = ad3542r_ch_ranges,
+ .num_ranges = ARRAY_SIZE(ad3542r_ch_ranges),
+ .requires_output_range = true,
+};
+
+static const struct ad3552r_model_data ad3552r_model_data = {
+ .model_name = "ad3552r",
+ .chip_id = AD3552R_ID,
+ .num_hw_channels = 2,
+ .ranges_table = ad3552r_ch_ranges,
+ .num_ranges = ARRAY_SIZE(ad3552r_ch_ranges),
+ .requires_output_range = false,
+};
+
static const struct spi_device_id ad3552r_id[] = {
- { "ad3542r", AD3542R_ID },
- { "ad3552r", AD3552R_ID },
+ {
+ .name = "ad3542r",
+ .driver_data = (kernel_ulong_t)&ad3542r_model_data
+ },
+ {
+ .name = "ad3552r",
+ .driver_data = (kernel_ulong_t)&ad3552r_model_data
+ },
{ }
};
MODULE_DEVICE_TABLE(spi, ad3552r_id);
static const struct of_device_id ad3552r_of_match[] = {
- { .compatible = "adi,ad3542r"},
- { .compatible = "adi,ad3552r"},
+ { .compatible = "adi,ad3542r", .data = &ad3542r_model_data },
+ { .compatible = "adi,ad3552r", .data = &ad3552r_model_data },
{ }
};
MODULE_DEVICE_TABLE(of, ad3552r_of_match);
--
2.45.0.rc1
Powered by blists - more mailing lists