| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <202405231332.bBXpW9Bj-lkp@intel.com>
Date: Thu, 23 May 2024 13:42:44 +0800
From: kernel test robot <lkp@...el.com>
To: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>,
steve.glendinning@...well.net, UNGLinuxDriver@...rochip.com,
davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com
Cc: oe-kbuild-all@...ts.linux.dev, netdev@...r.kernel.org,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
Subject: Re: [PATCH] net: usb: smsc95xx: configure external LEDs function for
EVB-LAN8670-USB
Hi Parthiban,
kernel test robot noticed the following build warnings:
[auto build test WARNING on 4b377b4868ef17b040065bd468668c707d2477a5]
url: https://github.com/intel-lab-lkp/linux/commits/Parthiban-Veerasooran/net-usb-smsc95xx-configure-external-LEDs-function-for-EVB-LAN8670-USB/20240522-221645
base: 4b377b4868ef17b040065bd468668c707d2477a5
patch link: https://lore.kernel.org/r/20240522140817.409936-1-Parthiban.Veerasooran%40microchip.com
patch subject: [PATCH] net: usb: smsc95xx: configure external LEDs function for EVB-LAN8670-USB
config: i386-randconfig-062-20240523 (https://download.01.org/0day-ci/archive/20240523/202405231332.bBXpW9Bj-lkp@intel.com/config)
compiler: gcc-13 (Ubuntu 13.2.0-4ubuntu3) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240523/202405231332.bBXpW9Bj-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@...el.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202405231332.bBXpW9Bj-lkp@intel.com/
sparse warnings: (new ones prefixed by >>)
>> drivers/net/usb/smsc95xx.c:1017:34: sparse: sparse: restricted __le16 degrades to integer
drivers/net/usb/smsc95xx.c:1018:34: sparse: sparse: restricted __le16 degrades to integer
vim +1017 drivers/net/usb/smsc95xx.c
878
879 static int smsc95xx_reset(struct usbnet *dev)
880 {
881 struct smsc95xx_priv *pdata = dev->driver_priv;
882 u32 read_buf, write_buf, burst_cap;
883 int ret = 0, timeout;
884
885 netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
886
887 ret = smsc95xx_write_reg(dev, HW_CFG, HW_CFG_LRST_);
888 if (ret < 0)
889 return ret;
890
891 timeout = 0;
892 do {
893 msleep(10);
894 ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
895 if (ret < 0)
896 return ret;
897 timeout++;
898 } while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
899
900 if (timeout >= 100) {
901 netdev_warn(dev->net, "timeout waiting for completion of Lite Reset\n");
902 return -ETIMEDOUT;
903 }
904
905 ret = smsc95xx_set_mac_address(dev);
906 if (ret < 0)
907 return ret;
908
909 netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
910 dev->net->dev_addr);
911
912 ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
913 if (ret < 0)
914 return ret;
915
916 netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
917 read_buf);
918
919 read_buf |= HW_CFG_BIR_;
920
921 ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
922 if (ret < 0)
923 return ret;
924
925 ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
926 if (ret < 0)
927 return ret;
928
929 netif_dbg(dev, ifup, dev->net,
930 "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
931 read_buf);
932
933 if (!turbo_mode) {
934 burst_cap = 0;
935 dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
936 } else if (dev->udev->speed == USB_SPEED_HIGH) {
937 burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
938 dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
939 } else {
940 burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
941 dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
942 }
943
944 netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
945 (ulong)dev->rx_urb_size);
946
947 ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
948 if (ret < 0)
949 return ret;
950
951 ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
952 if (ret < 0)
953 return ret;
954
955 netif_dbg(dev, ifup, dev->net,
956 "Read Value from BURST_CAP after writing: 0x%08x\n",
957 read_buf);
958
959 ret = smsc95xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
960 if (ret < 0)
961 return ret;
962
963 ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
964 if (ret < 0)
965 return ret;
966
967 netif_dbg(dev, ifup, dev->net,
968 "Read Value from BULK_IN_DLY after writing: 0x%08x\n",
969 read_buf);
970
971 ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
972 if (ret < 0)
973 return ret;
974
975 netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG: 0x%08x\n",
976 read_buf);
977
978 if (turbo_mode)
979 read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
980
981 read_buf &= ~HW_CFG_RXDOFF_;
982
983 /* set Rx data offset=2, Make IP header aligns on word boundary. */
984 read_buf |= NET_IP_ALIGN << 9;
985
986 ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
987 if (ret < 0)
988 return ret;
989
990 ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
991 if (ret < 0)
992 return ret;
993
994 netif_dbg(dev, ifup, dev->net,
995 "Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
996
997 ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
998 if (ret < 0)
999 return ret;
1000
1001 ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
1002 if (ret < 0)
1003 return ret;
1004 netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf);
1005
1006 /* Configure GPIO pins as LED outputs */
1007 write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
1008 LED_GPIO_CFG_FDX_LED;
1009
1010 /* Set LED Select (LED_SEL) bit for the external LED pins functionality
1011 * in the Microchip's EVB-LAN8670-USB 10BASE-T1S Ethernet device which
1012 * uses the below LED function.
1013 * nSPD_LED -> Speed Indicator
1014 * nLNKA_LED -> Link Indicator
1015 * nFDX_LED -> Activity Indicator
1016 */
> 1017 if (dev->udev->descriptor.idVendor == 0x184F &&
1018 dev->udev->descriptor.idProduct == 0x0051)
1019 write_buf |= LED_GPIO_CFG_LED_SEL;
1020
1021 ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
1022 if (ret < 0)
1023 return ret;
1024
1025 /* Init Tx */
1026 ret = smsc95xx_write_reg(dev, FLOW, 0);
1027 if (ret < 0)
1028 return ret;
1029
1030 ret = smsc95xx_write_reg(dev, AFC_CFG, AFC_CFG_DEFAULT);
1031 if (ret < 0)
1032 return ret;
1033
1034 /* Don't need mac_cr_lock during initialisation */
1035 ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr);
1036 if (ret < 0)
1037 return ret;
1038
1039 /* Init Rx */
1040 /* Set Vlan */
1041 ret = smsc95xx_write_reg(dev, VLAN1, (u32)ETH_P_8021Q);
1042 if (ret < 0)
1043 return ret;
1044
1045 /* Enable or disable checksum offload engines */
1046 ret = smsc95xx_set_features(dev->net, dev->net->features);
1047 if (ret < 0) {
1048 netdev_warn(dev->net, "Failed to set checksum offload features\n");
1049 return ret;
1050 }
1051
1052 smsc95xx_set_multicast(dev->net);
1053
1054 ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
1055 if (ret < 0)
1056 return ret;
1057
1058 /* enable PHY interrupts */
1059 read_buf |= INT_EP_CTL_PHY_INT_;
1060
1061 ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
1062 if (ret < 0)
1063 return ret;
1064
1065 ret = smsc95xx_start_tx_path(dev);
1066 if (ret < 0) {
1067 netdev_warn(dev->net, "Failed to start TX path\n");
1068 return ret;
1069 }
1070
1071 ret = smsc95xx_start_rx_path(dev);
1072 if (ret < 0) {
1073 netdev_warn(dev->net, "Failed to start RX path\n");
1074 return ret;
1075 }
1076
1077 netif_dbg(dev, ifup, dev->net, "smsc95xx_reset, return 0\n");
1078 return 0;
1079 }
1080
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
Powered by blists - more mailing lists