[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240523111008.4057988-2-s-vadapalli@ti.com>
Date: Thu, 23 May 2024 16:40:06 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>, <francesco@...cini.it>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <danishanwar@...com>,
<srk@...com>, <s-vadapalli@...com>
Subject: [PATCH v3 1/3] arm64: dts: ti: k3-j784s4-main: Add PCIe nodes
TI's J784S4 SoC has four instances of Gen3 PCIe Controllers namely
PCIe0, PCIe1, PCIe2 and PCIe3. PCIe0 and PCIe1 are 4-Lane controllers
while PCIe2 and PCIe3 are 2-Lane controllers.
Add support for the Root Complex Mode of operation of these PCIe instances.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 136 +++++++++++++++++++++
1 file changed, 136 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 6a4554c6c9c1..7f89f8dc24df 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -48,6 +48,26 @@ scm_conf: bus@...000 {
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x1c000>;
+ pcie0_ctrl: pcie0-ctrl@...0 {
+ compatible = "ti,j784s4-pcie-ctrl", "syscon";
+ reg = <0x4070 0x4>;
+ };
+
+ pcie1_ctrl: pcie1-ctrl@...4 {
+ compatible = "ti,j784s4-pcie-ctrl", "syscon";
+ reg = <0x4074 0x4>;
+ };
+
+ pcie2_ctrl: pcie2-ctrl@...8 {
+ compatible = "ti,j784s4-pcie-ctrl", "syscon";
+ reg = <0x4078 0x4>;
+ };
+
+ pcie3_ctrl: pcie3-ctrl@...c {
+ compatible = "ti,j784s4-pcie-ctrl", "syscon";
+ reg = <0x407c 0x4>;
+ };
+
serdes_ln_ctrl: mux-controller@...0 {
compatible = "reg-mux";
reg = <0x00004080 0x30>;
@@ -907,6 +927,122 @@ main_sdhci1: mmc@...0000 {
status = "disabled";
};
+ pcie0_rc: pcie@...0000 {
+ compatible = "ti,j784s4-pcie-host";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 332 0>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ vendor-id = <0x104c>;
+ device-id = <0xb012>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ status = "disabled";
+ };
+
+ pcie1_rc: pcie@...0000 {
+ compatible = "ti,j784s4-pcie-host";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 333 0>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ vendor-id = <0x104c>;
+ device-id = <0xb012>;
+ msi-map = <0x0 &gic_its 0x10000 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ status = "disabled";
+ };
+
+ pcie2_rc: pcie@...0000 {
+ compatible = "ti,j784s4-pcie-host";
+ reg = <0x00 0x02920000 0x00 0x1000>,
+ <0x00 0x02927000 0x00 0x400>,
+ <0x00 0x0e000000 0x00 0x00800000>,
+ <0x44 0x00000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie2_ctrl 0x0>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 334 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 334 0>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ vendor-id = <0x104c>;
+ device-id = <0xb012>;
+ msi-map = <0x0 &gic_its 0x20000 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ status = "disabled";
+ };
+
+ pcie3_rc: pcie@...0000 {
+ compatible = "ti,j784s4-pcie-host";
+ reg = <0x00 0x02930000 0x00 0x1000>,
+ <0x00 0x02937000 0x00 0x400>,
+ <0x00 0x0e800000 0x00 0x00800000>,
+ <0x44 0x10000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie3_ctrl 0x0>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 335 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 335 0>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ vendor-id = <0x104c>;
+ device-id = <0xb012>;
+ msi-map = <0x0 &gic_its 0x30000 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ status = "disabled";
+ };
+
serdes_wiz0: wiz@...0000 {
compatible = "ti,j784s4-wiz-10g";
#address-cells = <1>;
--
2.40.1
Powered by blists - more mailing lists