Message-ID: <824c34aa-7c4c-4edd-b41c-f9b5ff5aff03@oracle.com>
Date: Fri, 24 May 2024 09:36:38 +0100
From: John Garry <john.g.garry@...cle.com>
To: Xingui Yang <yangxingui@...wei.com>, yanaijie@...wei.com,
        jejb@...ux.ibm.com, martin.petersen@...cle.com,
        damien.lemoal@...nsource.wdc.com
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
        linuxarm@...wei.com, prime.zeng@...ilicon.com,
        chenxiang66@...ilicon.com, kangfenglong@...wei.com
Subject: Re: [PATCH v2] scsi: libsas: Fix exp-attached end device cannot be
 scanned in again after probe failed

On 24/04/2024 09:08, Xingui Yang wrote:
> We found that it is judged as broadcast flutter when the exp-attached end
> device reconnects after probe failed, as follows:
> 
> [78779.654026] sas: broadcast received: 0
> [78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10
> [78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed
> [78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
> [78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached
> [78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp)
> [78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found
> [78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
> [78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
> ...
> [78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
> [78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19
> [78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone
> [78835.187487] sas: broadcast received: 0
> [78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10
> [78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed
> [78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
> [78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05
> [78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp)
> [78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter
> [78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
> 
> The cause of the problem is that the related ex_phy's attached_sas_addr was
> not cleared after the end device probe failed. In order to solve the above
> problem, a function sas_ex_unregister_end_dev() is defined to clear the
> ex_phy information and unregister the end device after the exp-attached end
> device probe failed.
> 
> As the sata device is an asynchronous probe, the sata device may probe
> failed after done REVALIDATING DOMAIN. Then after its port is added to the
> sas_port_del_list, the port will not be deleted until the end of the next
> REVALIDATING DOMAIN and sas_destruct_ports() is called. A warning about
> creating a duplicate port will occur in the new REVALIDATING DOMAIN when
> the end device reconnects. Therefore, the previous destroy_list and
> sas_port_del_list should be handled before REVALIDATING DOMAIN.
> 
> Signed-off-by: Xingui Yang <yangxingui@...wei.com>
> ---
> Changes since v1:
> - Simplify the process of getting ex_phy id based on Jason's suggestion.
> - Update commit information.
> ---
>   drivers/scsi/libsas/sas_discover.c | 2 ++
>   drivers/scsi/libsas/sas_expander.c | 8 ++++++++
>   drivers/scsi/libsas/sas_internal.h | 6 +++++-
>   3 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
> index 8fb7c41c0962..aae90153f4c6 100644
> --- a/drivers/scsi/libsas/sas_discover.c
> +++ b/drivers/scsi/libsas/sas_discover.c
> @@ -517,6 +517,8 @@ static void sas_revalidate_domain(struct work_struct *work)
>   	struct sas_ha_struct *ha = port->ha;
>   	struct domain_device *ddev = port->port_dev;
>   
> +	sas_destruct_devices(port);
> +	sas_destruct_ports(port);

We still have both these same calls at the @out label - is that as desired?

Why do these new additions not cover the same job which those calls to 
the same functions @out covers?

>   	/* prevent revalidation from finding sata links in recovery */
>   	mutex_lock(&ha->disco_mutex);
>   	if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
> diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
> index f6e6db8b8aba..45793c10009b 100644
> --- a/drivers/scsi/libsas/sas_expander.c
> +++ b/drivers/scsi/libsas/sas_expander.c
> @@ -1856,6 +1856,14 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent,
>   	}
>   }
>   
> +void sas_ex_unregister_end_dev(struct domain_device *dev)
> +{
> +	struct domain_device *parent = dev->parent;
> +	struct sas_phy *phy = dev->phy;
> +
> +	sas_unregister_devs_sas_addr(parent, phy->number, true);
> +}
> +
>   static int sas_discover_bfs_by_root_level(struct domain_device *root,
>   					  const int level)
>   {
> diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
> index 3804aef165ad..434f928c2ed8 100644
> --- a/drivers/scsi/libsas/sas_internal.h
> +++ b/drivers/scsi/libsas/sas_internal.h
> @@ -50,6 +50,7 @@ void sas_discover_event(struct asd_sas_port *port, enum discover_event ev);
>   
>   void sas_init_dev(struct domain_device *dev);
>   void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev);
> +void sas_ex_unregister_end_dev(struct domain_device *dev);
>   
>   void sas_scsi_recover_host(struct Scsi_Host *shost);
>   
> @@ -145,7 +146,10 @@ static inline void sas_fail_probe(struct domain_device *dev, const char *func, i
>   		func, dev->parent ? "exp-attached" :
>   		"direct-attached",
>   		SAS_ADDR(dev->sas_addr), err);
> -	sas_unregister_dev(dev->port, dev);
> +	if (dev->parent && !dev_is_expander(dev->dev_type))

This check looks odd.

So we're checking if we have a parent device and we are not an expander, 
right?

> +		sas_ex_unregister_end_dev(dev);
> +	else
> +		sas_unregister_dev(dev->port, dev);
>   }
>   
>   static inline void sas_fill_in_rphy(struct domain_device *dev,

Powered by blists - more mailing lists