[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <gcfssxqggszg4tc6o5jx7swtpw3fwdaynnqvndrhleaap4jrld@cp2pjxwf3gqn>
Date: Fri, 24 May 2024 12:38:55 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Jayesh Choudhary <j-choudhary@...com>
Cc: linux-kernel@...r.kernel.org, andrzej.hajda@...el.com,
neil.armstrong@...aro.org, rfoss@...nel.org, Laurent.pinchart@...asonboard.com,
mripard@...nel.org, dri-devel@...ts.freedesktop.org, jonas@...boo.se,
jernej.skrabec@...il.com, maarten.lankhorst@...ux.intel.com, tzimmermann@...e.de,
airlied@...il.com, daniel@...ll.ch, a-bhatia1@...com
Subject: Re: [PATCH v2 1/2] drm/bridge: sii902x: Fix mode_valid hook
On Fri, May 24, 2024 at 01:03:04PM +0530, Jayesh Choudhary wrote:
> Currently, mode_valid hook returns all mode as valid and it is
> defined only in drm_connector_helper_funcs. With the introduction of
> 'DRM_BRIDGE_ATTACH_NO_CONNECTOR', connector is not initialized in
> bridge_attach call for cases when the encoder has this flag enabled.
> So add the mode_valid hook in drm_bridge_funcs as well with proper
> clock checks for maximum and minimum pixel clock supported by the
> bridge.
>
> Signed-off-by: Jayesh Choudhary <j-choudhary@...com>
> ---
> drivers/gpu/drm/bridge/sii902x.c | 38 ++++++++++++++++++++++++++++++--
> 1 file changed, 36 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> index 2fbeda9025bf..ef7c3ab3386c 100644
> --- a/drivers/gpu/drm/bridge/sii902x.c
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -163,6 +163,14 @@
>
> #define SII902X_AUDIO_PORT_INDEX 3
>
> +/*
> + * The maximum resolution supported by the HDMI bridge is 1080p@...z
> + * and 1920x1200 requiring a pixel clock of 165MHz and the minimum
> + * resolution supported is 480p@...z requiring a pixel clock of 25MHz
> + */
> +#define SII902X_MIN_PIXEL_CLOCK_KHZ 25000
> +#define SII902X_MAX_PIXEL_CLOCK_KHZ 165000
> +
> struct sii902x {
> struct i2c_client *i2c;
> struct regmap *regmap;
> @@ -310,12 +318,26 @@ static int sii902x_get_modes(struct drm_connector *connector)
> return num;
> }
>
> +static enum
> +drm_mode_status sii902x_validate(struct sii902x *sii902x,
> + const struct drm_display_mode *mode)
> +{
> + if (mode->clock < SII902X_MIN_PIXEL_CLOCK_KHZ)
> + return MODE_CLOCK_LOW;
> +
> + if (mode->clock > SII902X_MAX_PIXEL_CLOCK_KHZ)
> + return MODE_CLOCK_HIGH;
> +
> + return MODE_OK;
> +}
> +
> static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> {
> - /* TODO: check mode */
> + struct sii902x *sii902x = connector_to_sii902x(connector);
> + const struct drm_display_mode *mod = mode;
>
> - return MODE_OK;
> + return sii902x_validate(sii902x, mod);
If you have a mode_valid for the bridge, I don't think you need to
perform the same check for the connector.
> }
>
> static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
> @@ -499,11 +521,22 @@ static int sii902x_bridge_atomic_check(struct drm_bridge *bridge,
> * There might be flags negotiation supported in future but
> * set the bus flags in atomic_check statically for now.
> */
> +
> bridge_state->input_bus_cfg.flags = bridge->timings->input_bus_flags;
>
> return 0;
> }
>
> +static enum drm_mode_status
> +sii902x_bridge_mode_valid(struct drm_bridge *bridge,
> + const struct drm_display_info *info,
> + const struct drm_display_mode *mode)
> +{
> + struct sii902x *sii902x = bridge_to_sii902x(bridge);
> +
> + return sii902x_validate(sii902x, mode);
> +}
> +
> static const struct drm_bridge_funcs sii902x_bridge_funcs = {
> .attach = sii902x_bridge_attach,
> .mode_set = sii902x_bridge_mode_set,
> @@ -516,6 +549,7 @@ static const struct drm_bridge_funcs sii902x_bridge_funcs = {
> .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> .atomic_get_input_bus_fmts = sii902x_bridge_atomic_get_input_bus_fmts,
> .atomic_check = sii902x_bridge_atomic_check,
> + .mode_valid = sii902x_bridge_mode_valid,
> };
>
> static int sii902x_mute(struct sii902x *sii902x, bool mute)
> --
> 2.25.1
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists