[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240524143150.610949-5-abailon@baylibre.com>
Date: Fri, 24 May 2024 16:31:48 +0200
From: Alexandre Bailon <abailon@...libre.com>
To: rafael@...nel.org,
daniel.lezcano@...aro.org,
robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org
Cc: rui.zhang@...el.com,
lukasz.luba@....com,
linux-pm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Alexandre Bailon <abailon@...libre.com>
Subject: [PATCH v3 4/6] dt-bindings: thermal: Add a property to select the aggregation type
This adds a new property named "aggregation" that could be used to
select the aggregation type when there are multiple sensors assigned
to a thermal zone.
Signed-off-by: Alexandre Bailon <abailon@...libre.com>
---
.../devicetree/bindings/thermal/thermal-zones.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index fa7a72e2ba44..e6e4b46773e3 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -111,6 +111,14 @@ patternProperties:
coefficients are ordered and are matched with sensors by means of the
sensor ID. Additional coefficients are interpreted as constant offset.
+ aggregation:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - avg
+ - max
+ description:
+ Aggregation type to use compute a temperature from multiple sensors.
+
sustainable-power:
$ref: /schemas/types.yaml#/definitions/uint32
description:
--
2.44.1
Powered by blists - more mailing lists