| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <73c0fd157ac0d2d7dedf9c7fbe1a042b2490b6ba.1716578450.git.tjeznach@rivosinc.com>
Date: Fri, 24 May 2024 12:34:43 -0700
From: Tomasz Jeznach <tjeznach@...osinc.com>
To: Joerg Roedel <joro@...tes.org>,
Will Deacon <will@...nel.org>,
Robin Murphy <robin.murphy@....com>,
Paul Walmsley <paul.walmsley@...ive.com>
Cc: Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Anup Patel <apatel@...tanamicro.com>,
Sunil V L <sunilvl@...tanamicro.com>,
Nick Kossifidis <mick@....forth.gr>,
Sebastien Boeuf <seb@...osinc.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org,
iommu@...ts.linux.dev,
linux-riscv@...ts.infradead.org,
linux-kernel@...r.kernel.org,
linux@...osinc.com,
Tomasz Jeznach <tjeznach@...osinc.com>,
Lu Baolu <baolu.lu@...ux.intel.com>
Subject: [PATCH v6 3/7] iommu/riscv: Add RISC-V IOMMU PCIe device driver
Introduce device driver for PCIe implementation
of RISC-V IOMMU architected hardware.
IOMMU hardware and system support for MSI or MSI-X is
required by this implementation.
Vendor and device identifiers used in this patch
matches QEMU implementation of the RISC-V IOMMU PCIe
device, from Rivos VID (0x1efd) range allocated by the PCI-SIG.
MAINTAINERS | added iommu-pci.c already covered by matching pattern.
Link: https://lore.kernel.org/qemu-devel/20240307160319.675044-1-dbarboza@ventanamicro.com/
Co-developed-by: Nick Kossifidis <mick@....forth.gr>
Signed-off-by: Nick Kossifidis <mick@....forth.gr>
Reviewed-by: Lu Baolu <baolu.lu@...ux.intel.com>
Signed-off-by: Tomasz Jeznach <tjeznach@...osinc.com>
---
drivers/iommu/riscv/Kconfig | 5 ++
drivers/iommu/riscv/Makefile | 1 +
drivers/iommu/riscv/iommu-pci.c | 119 ++++++++++++++++++++++++++++++++
3 files changed, 125 insertions(+)
create mode 100644 drivers/iommu/riscv/iommu-pci.c
diff --git a/drivers/iommu/riscv/Kconfig b/drivers/iommu/riscv/Kconfig
index 5dcc5c45aa50..c071816f59a6 100644
--- a/drivers/iommu/riscv/Kconfig
+++ b/drivers/iommu/riscv/Kconfig
@@ -13,3 +13,8 @@ config RISCV_IOMMU
Say Y here if your SoC includes an IOMMU device implementing
the RISC-V IOMMU architecture.
+
+config RISCV_IOMMU_PCI
+ def_bool y if RISCV_IOMMU && PCI_MSI
+ help
+ Support for the PCIe implementation of RISC-V IOMMU architecture.
diff --git a/drivers/iommu/riscv/Makefile b/drivers/iommu/riscv/Makefile
index e4c189de58d3..f54c9ed17d41 100644
--- a/drivers/iommu/riscv/Makefile
+++ b/drivers/iommu/riscv/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_RISCV_IOMMU) += iommu.o iommu-platform.o
+obj-$(CONFIG_RISCV_IOMMU_PCI) += iommu-pci.o
diff --git a/drivers/iommu/riscv/iommu-pci.c b/drivers/iommu/riscv/iommu-pci.c
new file mode 100644
index 000000000000..0a60e068fdc9
--- /dev/null
+++ b/drivers/iommu/riscv/iommu-pci.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright © 2022-2024 Rivos Inc.
+ * Copyright © 2023 FORTH-ICS/CARV
+ *
+ * RISCV IOMMU as a PCIe device
+ *
+ * Authors
+ * Tomasz Jeznach <tjeznach@...osinc.com>
+ * Nick Kossifidis <mick@....forth.gr>
+ */
+
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/iommu.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+#include "iommu-bits.h"
+#include "iommu.h"
+
+/* Rivos Inc. assigned PCI Vendor and Device IDs */
+#ifndef PCI_VENDOR_ID_RIVOS
+#define PCI_VENDOR_ID_RIVOS 0x1efd
+#endif
+
+#ifndef PCI_DEVICE_ID_RIVOS_IOMMU
+#define PCI_DEVICE_ID_RIVOS_IOMMU 0xedf1
+#endif
+
+static int riscv_iommu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct device *dev = &pdev->dev;
+ struct riscv_iommu_device *iommu;
+ int rc, vec;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM))
+ return -ENODEV;
+
+ if (pci_resource_len(pdev, 0) < RISCV_IOMMU_REG_SIZE)
+ return -ENODEV;
+
+ rc = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
+ if (rc)
+ return dev_err_probe(dev, rc, "pcim_iomap_regions failed\n");
+
+ iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
+ if (!iommu)
+ return -ENOMEM;
+
+ iommu->dev = dev;
+ iommu->reg = pcim_iomap_table(pdev)[0];
+
+ pci_set_master(pdev);
+ dev_set_drvdata(dev, iommu);
+
+ /* Check device reported capabilities / features. */
+ iommu->caps = riscv_iommu_readq(iommu, RISCV_IOMMU_REG_CAP);
+ iommu->fctl = riscv_iommu_readl(iommu, RISCV_IOMMU_REG_FCTL);
+
+ /* The PCI driver only uses MSIs, make sure the IOMMU supports this */
+ switch (FIELD_GET(RISCV_IOMMU_CAP_IGS, iommu->caps)) {
+ case RISCV_IOMMU_CAP_IGS_MSI:
+ case RISCV_IOMMU_CAP_IGS_BOTH:
+ break;
+ default:
+ return dev_err_probe(dev, -ENODEV,
+ "unable to use message-signaled interrupts\n");
+ }
+
+ /* Allocate and assign IRQ vectors for the various events */
+ rc = pci_alloc_irq_vectors(pdev, 1, RISCV_IOMMU_INTR_COUNT,
+ PCI_IRQ_MSIX | PCI_IRQ_MSI);
+ if (rc <= 0)
+ return dev_err_probe(dev, -ENODEV,
+ "unable to allocate irq vectors\n");
+
+ iommu->irqs_count = rc;
+ for (vec = 0; vec < iommu->irqs_count; vec++)
+ iommu->irqs[vec] = msi_get_virq(dev, vec);
+
+ /* Enable message-signaled interrupts, fctl.WSI */
+ if (iommu->fctl & RISCV_IOMMU_FCTL_WSI) {
+ iommu->fctl ^= RISCV_IOMMU_FCTL_WSI;
+ riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl);
+ }
+
+ return riscv_iommu_init(iommu);
+}
+
+static void riscv_iommu_pci_remove(struct pci_dev *pdev)
+{
+ struct riscv_iommu_device *iommu = dev_get_drvdata(&pdev->dev);
+
+ riscv_iommu_remove(iommu);
+}
+
+static const struct pci_device_id riscv_iommu_pci_tbl[] = {
+ {PCI_VENDOR_ID_RIVOS, PCI_DEVICE_ID_RIVOS_IOMMU,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {0,}
+};
+
+static struct pci_driver riscv_iommu_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = riscv_iommu_pci_tbl,
+ .probe = riscv_iommu_pci_probe,
+ .remove = riscv_iommu_pci_remove,
+ .driver = {
+ .suppress_bind_attrs = true,
+ },
+};
+
+builtin_pci_driver(riscv_iommu_pci_driver);
--
2.34.1
Powered by blists - more mailing lists