[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <171684956152.1783037.2786989707792820997.b4-ty@sntech.de>
Date: Tue, 28 May 2024 00:42:15 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: Dragan Simic <dsimic@...jaro.org>,
linux-rockchip@...ts.infradead.org
Cc: Heiko Stuebner <heiko@...ech.de>,
conor+dt@...nel.org,
devicetree@...r.kernel.org,
stable@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
krzk+dt@...nel.org,
robh+dt@...nel.org,
Diederik de Haas <didi.debian@...ow.org>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
On Mon, 20 May 2024 19:20:28 +0200, Dragan Simic wrote:
> Correct the specified regulator-min-microvolt value for the buck DCDC_REG2
> regulator, which is part of the Rockchip RK809 PMIC, in the Pine64 Quartz64
> Model B board dts. According to the RK809 datasheet, version 1.01, this
> regulator is capable of producing voltages as low as 0.5 V on its output,
> instead of going down to 0.9 V only, which is additionally confirmed by the
> regulator-min-microvolt values found in the board dts files for the other
> supported boards that use the same RK809 PMIC.
>
> [...]
Applied, thanks!
[1/1] arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
commit: d201c92bff90f3d3d0b079fc955378c15c0483cc
Best regards,
--
Heiko Stuebner <heiko@...ech.de>
Powered by blists - more mailing lists