| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 27 May 2024 09:51:17 +0300
From: Abel Vesa <abel.vesa@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Rajendra Nayak <quic_rjendra@...cinc.com>,
Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH] arm64: dts: qcom: x1e80100: Enable tsens and thermal nodes
From: Rajendra Nayak <quic_rjendra@...cinc.com>
Add tsens and thermal nodes for x1e80100 SoC.
Signed-off-by: Rajendra Nayak <quic_rjendra@...cinc.com>
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1356 ++++++++++++++++++++++++++++++++
1 file changed, 1356 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 5f90a0b3c016..2e34086b0ddd 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2505,6 +2505,66 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
};
};
+ tsens0: thermal-sensor@...1000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c271000 0 0x1000>, /* TM */
+ <0 0x0c222000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@...2000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c272000 0 0x1000>, /* TM */
+ <0 0x0c223000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens2: thermal-sensor@...3000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c273000 0 0x1000>, /* TM */
+ <0 0x0c224000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens3: thermal-sensor@...4000 {
+ compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c274000 0 0x1000>, /* TM */
+ <0 0x0c225000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
usb_1_ss0_hsphy: phy@...000 {
compatible = "qcom,x1e80100-snps-eusb2-phy",
"qcom,sm8550-snps-eusb2-phy";
@@ -5325,4 +5385,1300 @@ timer {
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
+
+ thermal-zones {
+ aoss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu0-0-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu0_0_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_0_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_0_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-0-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu0_0_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_0_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_0_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-1-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu0_1_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_1_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_1_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-1-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu0_1_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_1_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_1_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-2-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu0_2_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_2_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_2_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-2-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu0_2_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_2_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_2_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-3-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu0_3_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_3_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_3_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-3-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu0_3_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_3_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_3_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss0-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ ddr_config0: ddr0-config {
+ temperature = <90000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu1-0-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu1_0_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_0_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_0_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-0-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ cpu1_0_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_0_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_0_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-1-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ cpu1_1_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_1_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_1_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-1-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ cpu1_1_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_1_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_1_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-2-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ cpu1_2_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_2_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_2_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-2-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ cpu1_2_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_2_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_2_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-3-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ cpu1_3_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_3_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_3_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-3-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ cpu1_3_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_3_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_3_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss1-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 0>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu2-0-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 1>;
+
+ trips {
+ cpu2_0_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_0_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_0_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-0-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ cpu2_0_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_0_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_0_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-1-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 3>;
+
+ trips {
+ cpu2_1_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_1_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_1_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-1-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 4>;
+
+ trips {
+ cpu2_1_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_1_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_1_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-2-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 5>;
+
+ trips {
+ cpu2_2_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_2_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_2_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-2-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 6>;
+
+ trips {
+ cpu2_2_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_2_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_2_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-3-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 7>;
+
+ trips {
+ cpu2_3_0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_3_0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_3_0_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-3-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 8>;
+
+ trips {
+ cpu2_3_1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_3_1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_3_1_crit: cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss2-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 9>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss2-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 10>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 0>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 1>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp0_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 2>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp1_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp2-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 3>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nssp2_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp3-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 4>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp3_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 5>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu0_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 6>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu1_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-2-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 7>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu2_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-3-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 8>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu3_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-4-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 9>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu4_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-5-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 10>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu5_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-6-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 11>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu6_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-7-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 12>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu7_junction_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camera0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 13>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camera1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens3 14>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-config {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ };
};
---
base-commit: 3689b0ef08b70e4e03b82ebd37730a03a672853a
change-id: 20240109-x1e80100-dts-thermal-47db566a60bc
Best regards,
--
Abel Vesa <abel.vesa@...aro.org>
Powered by blists - more mailing lists