| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240527075626.142576-2-ebiggers@kernel.org>
Date: Mon, 27 May 2024 00:56:25 -0700
From: Eric Biggers <ebiggers@...nel.org>
To: linux-crypto@...r.kernel.org
Cc: x86@...nel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v4 1/2] crypto: x86/aes-gcm - add VAES and AVX512 / AVX10 optimized AES-GCM
From: Eric Biggers <ebiggers@...gle.com>
Add implementations of AES-GCM for x86_64 CPUs that support VAES (vector
AES), VPCLMULQDQ (vector carryless multiplication), and either AVX512 or
AVX10. There are two implementations, sharing most source code: one
using 256-bit vectors and one using 512-bit vectors. This patch
improves AES-GCM performance by up to 162%; see Tables 1 and 2 below.
I wrote the new AES-GCM assembly code from scratch, focusing on
correctness, performance, code size (both source and binary), and
documenting the source. The new assembly file aes-gcm-avx10-x86_64.S is
about 1200 lines including extensive comments, and it generates less
than 8 KB of binary code. The main loop does 4 vectors at a time, with
the AES and GHASH instructions interleaved. Any remainder is handled
using a simple 1 vector at a time loop, with masking.
Several VAES + AVX512 implementations of AES-GCM exist from Intel,
including one in OpenSSL and one proposed for inclusion in Linux in 2021
(https://lore.kernel.org/linux-crypto/1611386920-28579-6-git-send-email-megha.dey@intel.com/).
These aren't really suitable to be used, though, due to the massive
amount of binary code generated (696 KB for OpenSSL, 200 KB for Linux)
and well as the significantly larger amount of assembly source (4978
lines for OpenSSL, 1788 lines for Linux). Also, Intel's code does not
support 256-bit vectors, which makes it not usable on future
AVX10/256-only CPUs, and also not ideal for certain Intel CPUs that have
downclocking issues. So I ended up starting from scratch. Usually my
much shorter code is actually slightly faster than Intel's AVX512 code,
though it depends on message length and on which of Intel's
implementations is used; for details, see Tables 3 and 4 below.
To facilitate potential integration into other projects, I've
dual-licensed aes-gcm-avx10-x86_64.S under Apache-2.0 OR BSD-2-Clause,
the same as the recently added RISC-V crypto code.
The following two tables summarize the performance improvement over the
existing AES-GCM code in Linux that uses AES-NI and AVX2:
Table 1: AES-256-GCM encryption throughput improvement,
CPU microarchitecture vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
----------------------+-------+-------+-------+-------+-------+-------+
Intel Ice Lake | 42% | 48% | 60% | 62% | 70% | 69% |
Intel Sapphire Rapids | 157% | 145% | 162% | 119% | 96% | 96% |
Intel Emerald Rapids | 156% | 144% | 161% | 115% | 95% | 100% |
AMD Zen 4 | 103% | 89% | 78% | 56% | 54% | 54% |
| 300 | 200 | 64 | 63 | 16 |
----------------------+-------+-------+-------+-------+-------+
Intel Ice Lake | 66% | 48% | 49% | 70% | 53% |
Intel Sapphire Rapids | 80% | 60% | 41% | 62% | 38% |
Intel Emerald Rapids | 79% | 60% | 41% | 62% | 38% |
AMD Zen 4 | 51% | 35% | 27% | 32% | 25% |
Table 2: AES-256-GCM decryption throughput improvement,
CPU microarchitecture vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
----------------------+-------+-------+-------+-------+-------+-------+
Intel Ice Lake | 42% | 48% | 59% | 63% | 67% | 71% |
Intel Sapphire Rapids | 159% | 145% | 161% | 125% | 102% | 100% |
Intel Emerald Rapids | 158% | 144% | 161% | 124% | 100% | 103% |
AMD Zen 4 | 110% | 95% | 80% | 59% | 56% | 54% |
| 300 | 200 | 64 | 63 | 16 |
----------------------+-------+-------+-------+-------+-------+
Intel Ice Lake | 67% | 56% | 46% | 70% | 56% |
Intel Sapphire Rapids | 79% | 62% | 39% | 61% | 39% |
Intel Emerald Rapids | 80% | 62% | 40% | 58% | 40% |
AMD Zen 4 | 49% | 36% | 30% | 35% | 28% |
The above numbers are percentage improvements in single-thread
throughput, so e.g. an increase from 4000 MB/s to 6000 MB/s would be
listed as 50%. They were collected by directly measuring the Linux
crypto API performance using a custom kernel module. Note that indirect
benchmarks (e.g. 'cryptsetup benchmark' or benchmarking dm-crypt I/O)
include more overhead and won't see quite as much of a difference. All
these benchmarks used an associated data length of 16 bytes. Note that
AES-GCM is almost always used with short associated data lengths.
The following two tables summarize how the performance of my code
compares with Intel's AVX512 AES-GCM code, both the version that is in
OpenSSL and the version that was proposed for inclusion in Linux.
Neither version exists in Linux currently, but these are alternative
AES-GCM implementations that could be chosen instead of mine. I
collected the following numbers on Emerald Rapids using a userspace
benchmark program that calls the assembly functions directly.
I've also included a comparison with Cloudflare's AES-GCM implementation
from https://boringssl-review.googlesource.com/c/boringssl/+/65987/3.
Table 3: VAES-based AES-256-GCM encryption throughput in MB/s,
implementation name vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
---------------------+-------+-------+-------+-------+-------+-------+
This implementation | 14171 | 12956 | 12318 | 9588 | 7293 | 6449 |
AVX512_Intel_OpenSSL | 14022 | 12467 | 11863 | 9107 | 5891 | 6472 |
AVX512_Intel_Linux | 13954 | 12277 | 11530 | 8712 | 6627 | 5898 |
AVX512_Cloudflare | 12564 | 11050 | 10905 | 8152 | 5345 | 5202 |
| 300 | 200 | 64 | 63 | 16 |
---------------------+-------+-------+-------+-------+-------+
This implementation | 4939 | 3688 | 1846 | 1821 | 738 |
AVX512_Intel_OpenSSL | 4629 | 4532 | 2734 | 2332 | 1131 |
AVX512_Intel_Linux | 4035 | 2966 | 1567 | 1330 | 639 |
AVX512_Cloudflare | 3344 | 2485 | 1141 | 1127 | 456 |
Table 4: VAES-based AES-256-GCM decryption throughput in MB/s,
implementation name vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
---------------------+-------+-------+-------+-------+-------+-------+
This implementation | 14276 | 13311 | 13007 | 11086 | 8268 | 8086 |
AVX512_Intel_OpenSSL | 14067 | 12620 | 12421 | 9587 | 5954 | 7060 |
AVX512_Intel_Linux | 14116 | 12795 | 11778 | 9269 | 7735 | 6455 |
AVX512_Cloudflare | 13301 | 12018 | 11919 | 9182 | 7189 | 6726 |
| 300 | 200 | 64 | 63 | 16 |
---------------------+-------+-------+-------+-------+-------+
This implementation | 6454 | 5020 | 2635 | 2602 | 1079 |
AVX512_Intel_OpenSSL | 5184 | 5799 | 2957 | 2545 | 1228 |
AVX512_Intel_Linux | 4394 | 4247 | 2235 | 1635 | 922 |
AVX512_Cloudflare | 4289 | 3851 | 1435 | 1417 | 574 |
So, usually my code is actually slightly faster than Intel's code,
though the OpenSSL implementation has a slight edge on messages shorter
than 256 bytes in this microbenchmark. (This also holds true when doing
the same tests on AMD Zen 4.) It can be seen that the large code size
(up to 94x larger!) of the Intel implementations doesn't seem to bring
much benefit, so starting from scratch with much smaller code, as I've
done, seems appropriate. The performance of my code on messages shorter
than 256 bytes could be improved through a limited amount of unrolling,
but it's unclear it would be worth it, given code size considerations
(e.g. caches) that don't get measured in microbenchmarks.
Signed-off-by: Eric Biggers <ebiggers@...gle.com>
---
arch/x86/crypto/Kconfig | 1 +
arch/x86/crypto/Makefile | 3 +
arch/x86/crypto/aes-gcm-avx10-x86_64.S | 1222 ++++++++++++++++++++++++
arch/x86/crypto/aesni-intel_glue.c | 549 ++++++++++-
4 files changed, 1759 insertions(+), 16 deletions(-)
create mode 100644 arch/x86/crypto/aes-gcm-avx10-x86_64.S
diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig
index c9e59589a1cee..24875e6295f2d 100644
--- a/arch/x86/crypto/Kconfig
+++ b/arch/x86/crypto/Kconfig
@@ -16,10 +16,11 @@ config CRYPTO_CURVE25519_X86
config CRYPTO_AES_NI_INTEL
tristate "Ciphers: AES, modes: ECB, CBC, CTS, CTR, XTR, XTS, GCM (AES-NI)"
depends on X86
select CRYPTO_AEAD
select CRYPTO_LIB_AES
+ select CRYPTO_LIB_GF128MUL
select CRYPTO_ALGAPI
select CRYPTO_SKCIPHER
select CRYPTO_SIMD
help
Block cipher: AES cipher algorithms
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 9c5ce56137385..a2a536b690fa9 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -48,10 +48,13 @@ chacha-x86_64-$(CONFIG_AS_AVX512) += chacha-avx512vl-x86_64.o
obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o
aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o
aesni-intel-$(CONFIG_64BIT) += aesni-intel_avx-x86_64.o \
aes_ctrby8_avx-x86_64.o aes-xts-avx-x86_64.o
+ifeq ($(CONFIG_AS_VAES)$(CONFIG_AS_VPCLMULQDQ),yy)
+aesni-intel-$(CONFIG_64BIT) += aes-gcm-avx10-x86_64.o
+endif
obj-$(CONFIG_CRYPTO_SHA1_SSSE3) += sha1-ssse3.o
sha1-ssse3-y := sha1_avx2_x86_64_asm.o sha1_ssse3_asm.o sha1_ssse3_glue.o
sha1-ssse3-$(CONFIG_AS_SHA1_NI) += sha1_ni_asm.o
diff --git a/arch/x86/crypto/aes-gcm-avx10-x86_64.S b/arch/x86/crypto/aes-gcm-avx10-x86_64.S
new file mode 100644
index 0000000000000..97e0ee515fc5f
--- /dev/null
+++ b/arch/x86/crypto/aes-gcm-avx10-x86_64.S
@@ -0,0 +1,1222 @@
+/* SPDX-License-Identifier: Apache-2.0 OR BSD-2-Clause */
+//
+// VAES and VPCLMULQDQ optimized AES-GCM for x86_64
+//
+// Copyright 2024 Google LLC
+//
+// Author: Eric Biggers <ebiggers@...gle.com>
+//
+//------------------------------------------------------------------------------
+//
+// This file is dual-licensed, meaning that you can use it under your choice of
+// either of the following two licenses:
+//
+// Licensed under the Apache License 2.0 (the "License"). You may obtain a copy
+// of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// or
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+//
+// 1. Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the following disclaimer.
+//
+// 2. Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the distribution.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+// POSSIBILITY OF SUCH DAMAGE.
+//
+//------------------------------------------------------------------------------
+//
+// This file implements AES-GCM (Galois/Counter Mode) for x86_64 CPUs that
+// support VAES (vector AES), VPCLMULQDQ (vector carryless multiplication), and
+// either AVX512 or AVX10. Some of the functions, notably the encryption and
+// decryption update functions which are the most performance-critical, are
+// provided in two variants generated from a macro: one using 256-bit vectors
+// (suffix: vaes_avx10_256) and one using 512-bit vectors (vaes_avx10_512). The
+// other, "shared" functions (vaes_avx10) use at most 256-bit vectors.
+//
+// The functions that use 512-bit vectors are intended for CPUs that support
+// 512-bit vectors *and* where using them doesn't cause significant
+// downclocking. They require the following CPU features:
+//
+// VAES && VPCLMULQDQ && BMI2 && ((AVX512BW && AVX512VL) || AVX10/512)
+//
+// The other functions require the following CPU features:
+//
+// VAES && VPCLMULQDQ && BMI2 && ((AVX512BW && AVX512VL) || AVX10/256)
+//
+// All functions use the "System V" ABI. The Windows ABI is not supported.
+//
+// Note that we use "avx10" in the names of the functions as a shorthand to
+// really mean "AVX10 or a certain set of AVX512 features". Due to Intel's
+// introduction of AVX512 and then its replacement by AVX10, there doesn't seem
+// to be a simple way to name things that makes sense on all CPUs.
+//
+// Note that the macros that support both 256-bit and 512-bit vectors could
+// fairly easily be changed to support 128-bit too. However, this would *not*
+// be sufficient to allow the code to run on CPUs without AVX512 or AVX10,
+// because the code heavily uses several features of these extensions other than
+// the vector length: the increase in the number of SIMD registers from 16 to
+// 32, masking support, and new instructions such as vpternlogd (which can do a
+// three-argument XOR). These features are very useful for AES-GCM.
+
+#include <linux/linkage.h>
+
+.section .rodata
+.p2align 6
+
+ // A shuffle mask that reflects the bytes of 16-byte blocks
+.Lbswap_mask:
+ .octa 0x000102030405060708090a0b0c0d0e0f
+
+ // This is the GHASH reducing polynomial without its constant term, i.e.
+ // x^128 + x^7 + x^2 + x, represented using the backwards mapping
+ // between bits and polynomial coefficients.
+ //
+ // Alternatively, it can be interpreted as the naturally-ordered
+ // representation of the polynomial x^127 + x^126 + x^121 + 1, i.e. the
+ // "reversed" GHASH reducing polynomial without its x^128 term.
+.Lgfpoly:
+ .octa 0xc2000000000000000000000000000001
+
+ // Same as above, but with the (1 << 64) bit set.
+.Lgfpoly_and_internal_carrybit:
+ .octa 0xc2000000000000010000000000000001
+
+ // The below constants are used for incrementing the counter blocks.
+ // ctr_pattern points to the four 128-bit values [0, 1, 2, 3].
+ // inc_2blocks and inc_4blocks point to the single 128-bit values 2 and
+ // 4. Note that the same '2' is reused in ctr_pattern and inc_2blocks.
+.Lctr_pattern:
+ .octa 0
+ .octa 1
+.Linc_2blocks:
+ .octa 2
+ .octa 3
+.Linc_4blocks:
+ .octa 4
+
+// Number of powers of the hash key stored in the key struct. The powers are
+// stored from highest (H^NUM_H_POWERS) to lowest (H^1).
+#define NUM_H_POWERS 16
+
+// Offset to AES key length (in bytes) in the key struct
+#define OFFSETOF_AESKEYLEN 480
+
+// Offset to start of hash key powers array in the key struct
+#define OFFSETOF_H_POWERS 512
+
+// Offset to end of hash key powers array in the key struct.
+//
+// This is immediately followed by three zeroized padding blocks, which are
+// included so that partial vectors can be handled more easily. E.g. if VL=64
+// and two blocks remain, we load the 4 values [H^2, H^1, 0, 0]. The most
+// padding blocks needed is 3, which occurs if [H^1, 0, 0, 0] is loaded.
+#define OFFSETOFEND_H_POWERS (OFFSETOF_H_POWERS + (NUM_H_POWERS * 16))
+
+.text
+
+// Set the vector length in bytes. This sets the VL variable and defines
+// register aliases V0-V31 that map to the ymm or zmm registers.
+.macro _set_veclen vl
+ .set VL, \vl
+.irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, \
+ 16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+.if VL == 32
+ .set V\i, %ymm\i
+.elseif VL == 64
+ .set V\i, %zmm\i
+.else
+ .error "Unsupported vector length"
+.endif
+.endr
+.endm
+
+// The _ghash_mul_step macro does one step of GHASH multiplication of the
+// 128-bit lanes of \a by the corresponding 128-bit lanes of \b and storing the
+// reduced products in \dst. \t0, \t1, and \t2 are temporary registers of the
+// same size as \a and \b. To complete all steps, this must invoked with \i=0
+// through \i=9. The division into steps allows users of this macro to
+// optionally interleave the computation with other instructions. Users of this
+// macro must preserve the parameter registers across steps.
+//
+// The multiplications are done in GHASH's representation of the finite field
+// GF(2^128). Elements of GF(2^128) are represented as binary polynomials
+// (i.e. polynomials whose coefficients are bits) modulo a reducing polynomial
+// G. The GCM specification uses G = x^128 + x^7 + x^2 + x + 1. Addition is
+// just XOR, while multiplication is more complex and has two parts: (a) do
+// carryless multiplication of two 128-bit input polynomials to get a 256-bit
+// intermediate product polynomial, and (b) reduce the intermediate product to
+// 128 bits by adding multiples of G that cancel out terms in it. (Adding
+// multiples of G doesn't change which field element the polynomial represents.)
+//
+// Unfortunately, the GCM specification maps bits to/from polynomial
+// coefficients backwards from the natural order. In each byte it specifies the
+// highest bit to be the lowest order polynomial coefficient, *not* the highest!
+// This makes it nontrivial to work with the GHASH polynomials. We could
+// reflect the bits, but x86 doesn't have an instruction that does that.
+//
+// Instead, we operate on the values without bit-reflecting them. This *mostly*
+// just works, since XOR and carryless multiplication are symmetric with respect
+// to bit order, but it has some consequences. First, due to GHASH's byte
+// order, by skipping bit reflection, *byte* reflection becomes necessary to
+// give the polynomial terms a consistent order. E.g., considering an N-bit
+// value interpreted using the G = x^128 + x^7 + x^2 + x + 1 convention, bits 0
+// through N-1 of the byte-reflected value represent the coefficients of x^(N-1)
+// through x^0, whereas bits 0 through N-1 of the non-byte-reflected value
+// represent x^7...x^0, x^15...x^8, ..., x^(N-1)...x^(N-8) which can't be worked
+// with. Fortunately, x86's vpshufb instruction can do byte reflection.
+//
+// Second, forgoing the bit reflection causes an extra multiple of x (still
+// using the G = x^128 + x^7 + x^2 + x + 1 convention) to be introduced by each
+// multiplication. This is because an M-bit by N-bit carryless multiplication
+// really produces a (M+N-1)-bit product, but in practice it's zero-extended to
+// M+N bits. In the G = x^128 + x^7 + x^2 + x + 1 convention, which maps bits
+// to polynomial coefficients backwards, this zero-extension actually changes
+// the product by introducing an extra factor of x. Therefore, users of this
+// macro must ensure that one of the inputs has an extra factor of x^-1, i.e.
+// the multiplicative inverse of x, to cancel out the extra x.
+//
+// Third, the backwards coefficients convention is just confusing to work with,
+// since it makes "low" and "high" in the polynomial math mean the opposite of
+// their normal meaning in computer programming. This can be solved by using an
+// alternative interpretation: the polynomial coefficients are understood to be
+// in the natural order, and the multiplication is actually \a * \b * x^-128 mod
+// x^128 + x^127 + x^126 + x^121 + 1. This doesn't change the inputs, outputs,
+// or the implementation at all; it just changes the mathematical interpretation
+// of what each instruction is doing. Starting from here, we'll use this
+// alternative interpretation, as it's easier to understand the code that way.
+//
+// Moving onto the implementation, the vpclmulqdq instruction does 64 x 64 =>
+// 128-bit carryless multiplication, so we break the 128 x 128 multiplication
+// into parts as follows (the _L and _H suffixes denote low and high 64 bits):
+//
+// LO = a_L * b_L
+// MI = (a_L * b_H) + (a_H * b_L)
+// HI = a_H * b_H
+//
+// The 256-bit product is x^128*HI + x^64*MI + LO. LO, MI, and HI are 128-bit.
+// Note that MI "overlaps" with LO and HI. We don't consolidate MI into LO and
+// HI right away, since the way the reduction works makes that unnecessary.
+//
+// For the reduction, we cancel out the low 128 bits by adding multiples of G =
+// x^128 + x^127 + x^126 + x^121 + 1. This is done by two iterations, each of
+// which cancels out the next lowest 64 bits. Consider a value x^64*A + B,
+// where A and B are 128-bit. Adding B_L*G to that value gives:
+//
+// x^64*A + B + B_L*G
+// = x^64*A + x^64*B_H + B_L + B_L*(x^128 + x^127 + x^126 + x^121 + 1)
+// = x^64*A + x^64*B_H + B_L + x^128*B_L + x^64*B_L*(x^63 + x^62 + x^57) + B_L
+// = x^64*A + x^64*B_H + x^128*B_L + x^64*B_L*(x^63 + x^62 + x^57) + B_L + B_L
+// = x^64*(A + B_H + x^64*B_L + B_L*(x^63 + x^62 + x^57))
+//
+// So: if we sum A, B with its halves swapped, and the low half of B times x^63
+// + x^62 + x^57, we get a 128-bit value C where x^64*C is congruent to the
+// original value x^64*A + B. I.e., the low 64 bits got canceled out.
+//
+// We just need to apply this twice: first to fold LO into MI, and second to
+// fold the updated MI into HI.
+//
+// The needed three-argument XORs are done using the vpternlogd instruction with
+// immediate 0x96, since this is faster than two vpxord instructions.
+//
+// A potential optimization, assuming that b is fixed per-key (if a is fixed
+// per-key it would work the other way around), is to use one iteration of the
+// reduction described above to precompute a value c such that x^64*c = b mod G,
+// and then multiply a_L by c (and implicitly by x^64) instead of by b:
+//
+// MI = (a_L * c_L) + (a_H * b_L)
+// HI = (a_L * c_H) + (a_H * b_H)
+//
+// This would eliminate the LO part of the intermediate product, which would
+// eliminate the need to fold LO into MI. This would save two instructions,
+// including a vpclmulqdq. However, we currently don't use this optimization
+// because it would require twice as many per-key precomputed values.
+//
+// Using Karatsuba multiplication instead of "schoolbook" multiplication
+// similarly would save a vpclmulqdq but does not seem to be worth it.
+.macro _ghash_mul_step i, a, b, dst, gfpoly, t0, t1, t2
+.if \i == 0
+ vpclmulqdq $0x00, \a, \b, \t0 // LO = a_L * b_L
+ vpclmulqdq $0x01, \a, \b, \t1 // MI_0 = a_L * b_H
+.elseif \i == 1
+ vpclmulqdq $0x10, \a, \b, \t2 // MI_1 = a_H * b_L
+.elseif \i == 2
+ vpxord \t2, \t1, \t1 // MI = MI_0 + MI_1
+.elseif \i == 3
+ vpclmulqdq $0x01, \t0, \gfpoly, \t2 // LO_L*(x^63 + x^62 + x^57)
+.elseif \i == 4
+ vpshufd $0x4e, \t0, \t0 // Swap halves of LO
+.elseif \i == 5
+ vpternlogd $0x96, \t2, \t0, \t1 // Fold LO into MI
+.elseif \i == 6
+ vpclmulqdq $0x11, \a, \b, \dst // HI = a_H * b_H
+.elseif \i == 7
+ vpclmulqdq $0x01, \t1, \gfpoly, \t0 // MI_L*(x^63 + x^62 + x^57)
+.elseif \i == 8
+ vpshufd $0x4e, \t1, \t1 // Swap halves of MI
+.elseif \i == 9
+ vpternlogd $0x96, \t0, \t1, \dst // Fold MI into HI
+.endif
+.endm
+
+// GHASH-multiply the 128-bit lanes of \a by the 128-bit lanes of \b and store
+// the reduced products in \dst. See _ghash_mul_step for full explanation.
+.macro _ghash_mul a, b, dst, gfpoly, t0, t1, t2
+.irp i, 0,1,2,3,4,5,6,7,8,9
+ _ghash_mul_step \i, \a, \b, \dst, \gfpoly, \t0, \t1, \t2
+.endr
+.endm
+
+// GHASH-multiply the 128-bit lanes of \a by the 128-bit lanes of \b and add the
+// *unreduced* products to \lo, \mi, and \hi.
+.macro _ghash_mul_noreduce a, b, lo, mi, hi, t0, t1, t2, t3
+ vpclmulqdq $0x00, \a, \b, \t0 // a_L * b_L
+ vpclmulqdq $0x01, \a, \b, \t1 // a_L * b_H
+ vpclmulqdq $0x10, \a, \b, \t2 // a_H * b_L
+ vpclmulqdq $0x11, \a, \b, \t3 // a_H * b_H
+ vpxord \t0, \lo, \lo
+ vpternlogd $0x96, \t2, \t1, \mi
+ vpxord \t3, \hi, \hi
+.endm
+
+// Reduce the unreduced products from \lo, \mi, and \hi and store the 128-bit
+// reduced products in \hi. See _ghash_mul_step for explanation of reduction.
+.macro _ghash_reduce lo, mi, hi, gfpoly, t0
+ vpclmulqdq $0x01, \lo, \gfpoly, \t0
+ vpshufd $0x4e, \lo, \lo
+ vpternlogd $0x96, \t0, \lo, \mi
+ vpclmulqdq $0x01, \mi, \gfpoly, \t0
+ vpshufd $0x4e, \mi, \mi
+ vpternlogd $0x96, \t0, \mi, \hi
+.endm
+
+// void aes_gcm_precompute_##suffix(struct aes_gcm_key_avx10 *key);
+//
+// Given the expanded AES key |key->aes_key|, this function derives the GHASH
+// subkey and initializes |key->ghash_key_powers| with powers of it.
+//
+// The number of key powers initialized is NUM_H_POWERS, and they are stored in
+// the order H^NUM_H_POWERS to H^1. The zeroized padding blocks after the key
+// powers themselves are also initialized.
+//
+// This macro supports both VL=32 and VL=64. _set_veclen must have been invoked
+// with the desired length. In the VL=32 case, the function computes twice as
+// many key powers than are actually used by the VL=32 GCM update functions.
+// This is done to keep the key format the same regardless of vector length.
+.macro _aes_gcm_precompute
+
+ // Function arguments
+ .set KEY, %rdi
+
+ // Additional local variables. V0-V2 and %rax are used as temporaries.
+ .set POWERS_PTR, %rsi
+ .set RNDKEYLAST_PTR, %rdx
+ .set H_CUR, V3
+ .set H_CUR_YMM, %ymm3
+ .set H_CUR_XMM, %xmm3
+ .set H_INC, V4
+ .set H_INC_YMM, %ymm4
+ .set H_INC_XMM, %xmm4
+ .set GFPOLY, V5
+ .set GFPOLY_YMM, %ymm5
+ .set GFPOLY_XMM, %xmm5
+
+ // Get pointer to lowest set of key powers (located at end of array).
+ lea OFFSETOFEND_H_POWERS-VL(KEY), POWERS_PTR
+
+ // Encrypt an all-zeroes block to get the raw hash subkey.
+ movl OFFSETOF_AESKEYLEN(KEY), %eax
+ lea 6*16(KEY,%rax,4), RNDKEYLAST_PTR
+ vmovdqu (KEY), %xmm0 // Zero-th round key XOR all-zeroes block
+ add $16, KEY
+1:
+ vaesenc (KEY), %xmm0, %xmm0
+ add $16, KEY
+ cmp KEY, RNDKEYLAST_PTR
+ jne 1b
+ vaesenclast (RNDKEYLAST_PTR), %xmm0, %xmm0
+
+ // Reflect the bytes of the raw hash subkey.
+ vpshufb .Lbswap_mask(%rip), %xmm0, H_CUR_XMM
+
+ // Zeroize the padding blocks.
+ vpxor %xmm0, %xmm0, %xmm0
+ vmovdqu %ymm0, VL(POWERS_PTR)
+ vmovdqu %xmm0, VL+2*16(POWERS_PTR)
+
+ // Finish preprocessing the first key power, H^1. Since this GHASH
+ // implementation operates directly on values with the backwards bit
+ // order specified by the GCM standard, it's necessary to preprocess the
+ // raw key as follows. First, reflect its bytes. Second, multiply it
+ // by x^-1 mod x^128 + x^7 + x^2 + x + 1 (if using the backwards
+ // interpretation of polynomial coefficients), which can also be
+ // interpreted as multiplication by x mod x^128 + x^127 + x^126 + x^121
+ // + 1 using the alternative, natural interpretation of polynomial
+ // coefficients. For details, see the comment above _ghash_mul_step.
+ //
+ // Either way, for the multiplication the concrete operation performed
+ // is a left shift of the 128-bit value by 1 bit, then an XOR with (0xc2
+ // << 120) | 1 if a 1 bit was carried out. However, there's no 128-bit
+ // wide shift instruction, so instead double each of the two 64-bit
+ // halves and incorporate the internal carry bit into the value XOR'd.
+ vpshufd $0xd3, H_CUR_XMM, %xmm0
+ vpsrad $31, %xmm0, %xmm0
+ vpaddq H_CUR_XMM, H_CUR_XMM, H_CUR_XMM
+ vpand .Lgfpoly_and_internal_carrybit(%rip), %xmm0, %xmm0
+ vpxor %xmm0, H_CUR_XMM, H_CUR_XMM
+
+ // Load the gfpoly constant.
+ vbroadcasti32x4 .Lgfpoly(%rip), GFPOLY
+
+ // Square H^1 to get H^2.
+ //
+ // Note that as with H^1, all higher key powers also need an extra
+ // factor of x^-1 (or x using the natural interpretation). Nothing
+ // special needs to be done to make this happen, though: H^1 * H^1 would
+ // end up with two factors of x^-1, but the multiplication consumes one.
+ // So the product H^2 ends up with the desired one factor of x^-1.
+ _ghash_mul H_CUR_XMM, H_CUR_XMM, H_INC_XMM, GFPOLY_XMM, \
+ %xmm0, %xmm1, %xmm2
+
+ // Create H_CUR_YMM = [H^2, H^1] and H_INC_YMM = [H^2, H^2].
+ vinserti128 $1, H_CUR_XMM, H_INC_YMM, H_CUR_YMM
+ vinserti128 $1, H_INC_XMM, H_INC_YMM, H_INC_YMM
+
+.if VL == 64
+ // Create H_CUR = [H^4, H^3, H^2, H^1] and H_INC = [H^4, H^4, H^4, H^4].
+ _ghash_mul H_INC_YMM, H_CUR_YMM, H_INC_YMM, GFPOLY_YMM, \
+ %ymm0, %ymm1, %ymm2
+ vinserti64x4 $1, H_CUR_YMM, H_INC, H_CUR
+ vshufi64x2 $0, H_INC, H_INC, H_INC
+.endif
+
+ // Store the lowest set of key powers.
+ vmovdqu8 H_CUR, (POWERS_PTR)
+
+ // Compute and store the remaining key powers. With VL=32, repeatedly
+ // multiply [H^(i+1), H^i] by [H^2, H^2] to get [H^(i+3), H^(i+2)].
+ // With VL=64, repeatedly multiply [H^(i+3), H^(i+2), H^(i+1), H^i] by
+ // [H^4, H^4, H^4, H^4] to get [H^(i+7), H^(i+6), H^(i+5), H^(i+4)].
+ mov $(NUM_H_POWERS*16/VL) - 1, %eax
+.Lprecompute_next\@:
+ sub $VL, POWERS_PTR
+ _ghash_mul H_INC, H_CUR, H_CUR, GFPOLY, V0, V1, V2
+ vmovdqu8 H_CUR, (POWERS_PTR)
+ dec %eax
+ jnz .Lprecompute_next\@
+
+ vzeroupper // This is needed after using ymm or zmm registers.
+ RET
+.endm
+
+// XOR together the 128-bit lanes of \src (whose low lane is \src_xmm) and store
+// the result in \dst_xmm. This implicitly zeroizes the other lanes of dst.
+.macro _horizontal_xor src, src_xmm, dst_xmm, t0_xmm, t1_xmm, t2_xmm
+ vextracti32x4 $1, \src, \t0_xmm
+.if VL == 32
+ vpxord \t0_xmm, \src_xmm, \dst_xmm
+.elseif VL == 64
+ vextracti32x4 $2, \src, \t1_xmm
+ vextracti32x4 $3, \src, \t2_xmm
+ vpxord \t0_xmm, \src_xmm, \dst_xmm
+ vpternlogd $0x96, \t1_xmm, \t2_xmm, \dst_xmm
+.else
+ .error "Unsupported vector length"
+.endif
+.endm
+
+// Do one step of the GHASH update of the data blocks given in the vector
+// registers GHASHDATA[0-3]. \i specifies the step to do, 0 through 9. The
+// division into steps allows users of this macro to optionally interleave the
+// computation with other instructions. This macro uses the vector register
+// GHASH_ACC as input/output; GHASHDATA[0-3] as inputs that are clobbered;
+// H_POW[4-1], GFPOLY, and BSWAP_MASK as inputs that aren't clobbered; and
+// GHASHTMP[0-2] as temporaries. This macro handles the byte-reflection of the
+// data blocks. The parameter registers must be preserved across steps.
+//
+// The GHASH update does: GHASH_ACC = H_POW4*(GHASHDATA0 + GHASH_ACC) +
+// H_POW3*GHASHDATA1 + H_POW2*GHASHDATA2 + H_POW1*GHASHDATA3, where the
+// operations are vectorized operations on vectors of 16-byte blocks. E.g.,
+// with VL=32 there are 2 blocks per vector and the vectorized terms correspond
+// to the following non-vectorized terms:
+//
+// H_POW4*(GHASHDATA0 + GHASH_ACC) => H^8*(blk0 + GHASH_ACC_XMM) and H^7*(blk1 + 0)
+// H_POW3*GHASHDATA1 => H^6*blk2 and H^5*blk3
+// H_POW2*GHASHDATA2 => H^4*blk4 and H^3*blk5
+// H_POW1*GHASHDATA3 => H^2*blk6 and H^1*blk7
+//
+// With VL=64, we use 4 blocks/vector, H^16 through H^1, and blk0 through blk15.
+//
+// More concretely, this code does:
+// - Do vectorized "schoolbook" multiplications to compute the intermediate
+// 256-bit product of each block and its corresponding hash key power.
+// There are 4*VL/16 of these intermediate products.
+// - Sum (XOR) the intermediate 256-bit products across vectors. This leaves
+// VL/16 256-bit intermediate values.
+// - Do a vectorized reduction of these 256-bit intermediate values to
+// 128-bits each. This leaves VL/16 128-bit intermediate values.
+// - Sum (XOR) these values and store the 128-bit result in GHASH_ACC_XMM.
+//
+// See _ghash_mul_step for the full explanation of the operations performed for
+// each individual finite field multiplication and reduction.
+.macro _ghash_step_4x i
+.if \i == 0
+ vpshufb BSWAP_MASK, GHASHDATA0, GHASHDATA0
+ vpxord GHASH_ACC, GHASHDATA0, GHASHDATA0
+ vpshufb BSWAP_MASK, GHASHDATA1, GHASHDATA1
+ vpshufb BSWAP_MASK, GHASHDATA2, GHASHDATA2
+.elseif \i == 1
+ vpshufb BSWAP_MASK, GHASHDATA3, GHASHDATA3
+ vpclmulqdq $0x00, H_POW4, GHASHDATA0, GHASH_ACC // LO_0
+ vpclmulqdq $0x00, H_POW3, GHASHDATA1, GHASHTMP0 // LO_1
+ vpclmulqdq $0x00, H_POW2, GHASHDATA2, GHASHTMP1 // LO_2
+.elseif \i == 2
+ vpxord GHASHTMP0, GHASH_ACC, GHASH_ACC // sum(LO_{1,0})
+ vpclmulqdq $0x00, H_POW1, GHASHDATA3, GHASHTMP2 // LO_3
+ vpternlogd $0x96, GHASHTMP2, GHASHTMP1, GHASH_ACC // LO = sum(LO_{3,2,1,0})
+ vpclmulqdq $0x01, H_POW4, GHASHDATA0, GHASHTMP0 // MI_0
+.elseif \i == 3
+ vpclmulqdq $0x01, H_POW3, GHASHDATA1, GHASHTMP1 // MI_1
+ vpclmulqdq $0x01, H_POW2, GHASHDATA2, GHASHTMP2 // MI_2
+ vpternlogd $0x96, GHASHTMP2, GHASHTMP1, GHASHTMP0 // sum(MI_{2,1,0})
+ vpclmulqdq $0x01, H_POW1, GHASHDATA3, GHASHTMP1 // MI_3
+.elseif \i == 4
+ vpclmulqdq $0x10, H_POW4, GHASHDATA0, GHASHTMP2 // MI_4
+ vpternlogd $0x96, GHASHTMP2, GHASHTMP1, GHASHTMP0 // sum(MI_{4,3,2,1,0})
+ vpclmulqdq $0x10, H_POW3, GHASHDATA1, GHASHTMP1 // MI_5
+ vpclmulqdq $0x10, H_POW2, GHASHDATA2, GHASHTMP2 // MI_6
+.elseif \i == 5
+ vpternlogd $0x96, GHASHTMP2, GHASHTMP1, GHASHTMP0 // sum(MI_{6,5,4,3,2,1,0})
+ vpclmulqdq $0x01, GHASH_ACC, GFPOLY, GHASHTMP2 // LO_L*(x^63 + x^62 + x^57)
+ vpclmulqdq $0x10, H_POW1, GHASHDATA3, GHASHTMP1 // MI_7
+ vpxord GHASHTMP1, GHASHTMP0, GHASHTMP0 // MI = sum(MI_{7,6,5,4,3,2,1,0})
+.elseif \i == 6
+ vpshufd $0x4e, GHASH_ACC, GHASH_ACC // Swap halves of LO
+ vpclmulqdq $0x11, H_POW4, GHASHDATA0, GHASHDATA0 // HI_0
+ vpclmulqdq $0x11, H_POW3, GHASHDATA1, GHASHDATA1 // HI_1
+ vpclmulqdq $0x11, H_POW2, GHASHDATA2, GHASHDATA2 // HI_2
+.elseif \i == 7
+ vpternlogd $0x96, GHASHTMP2, GHASH_ACC, GHASHTMP0 // Fold LO into MI
+ vpclmulqdq $0x11, H_POW1, GHASHDATA3, GHASHDATA3 // HI_3
+ vpternlogd $0x96, GHASHDATA2, GHASHDATA1, GHASHDATA0 // sum(HI_{2,1,0})
+ vpclmulqdq $0x01, GHASHTMP0, GFPOLY, GHASHTMP1 // MI_L*(x^63 + x^62 + x^57)
+.elseif \i == 8
+ vpxord GHASHDATA3, GHASHDATA0, GHASH_ACC // HI = sum(HI_{3,2,1,0})
+ vpshufd $0x4e, GHASHTMP0, GHASHTMP0 // Swap halves of MI
+ vpternlogd $0x96, GHASHTMP1, GHASHTMP0, GHASH_ACC // Fold MI into HI
+.elseif \i == 9
+ _horizontal_xor GHASH_ACC, GHASH_ACC_XMM, GHASH_ACC_XMM, \
+ GHASHDATA0_XMM, GHASHDATA1_XMM, GHASHDATA2_XMM
+.endif
+.endm
+
+// Do one non-last round of AES encryption on the counter blocks in V0-V3 using
+// the round key that has been broadcast to all 128-bit lanes of \round_key.
+.macro _vaesenc_4x round_key
+ vaesenc \round_key, V0, V0
+ vaesenc \round_key, V1, V1
+ vaesenc \round_key, V2, V2
+ vaesenc \round_key, V3, V3
+.endm
+
+// Start the AES encryption of four vectors of counter blocks.
+.macro _ctr_begin_4x
+
+ // Increment LE_CTR four times to generate four vectors of little-endian
+ // counter blocks, swap each to big-endian, and store them in V0-V3.
+ vpshufb BSWAP_MASK, LE_CTR, V0
+ vpaddd LE_CTR_INC, LE_CTR, LE_CTR
+ vpshufb BSWAP_MASK, LE_CTR, V1
+ vpaddd LE_CTR_INC, LE_CTR, LE_CTR
+ vpshufb BSWAP_MASK, LE_CTR, V2
+ vpaddd LE_CTR_INC, LE_CTR, LE_CTR
+ vpshufb BSWAP_MASK, LE_CTR, V3
+ vpaddd LE_CTR_INC, LE_CTR, LE_CTR
+
+ // AES "round zero": XOR in the zero-th round key.
+ vpxord RNDKEY0, V0, V0
+ vpxord RNDKEY0, V1, V1
+ vpxord RNDKEY0, V2, V2
+ vpxord RNDKEY0, V3, V3
+.endm
+
+// void aes_gcm_{enc,dec}_update_##suffix(const struct aes_gcm_key_avx10 *key,
+// const u32 le_ctr[4], u8 ghash_acc[16],
+// const u8 *src, u8 *dst, int datalen);
+//
+// This macro generates a GCM encryption or decryption update function with the
+// above prototype (with \enc selecting which one). This macro supports both
+// VL=32 and VL=64. _set_veclen must have been invoked with the desired length.
+//
+// This function computes the next portion of the CTR keystream, XOR's it with
+// |datalen| bytes from |src|, and writes the resulting encrypted or decrypted
+// data to |dst|. It also updates the GHASH accumulator |ghash_acc| using the
+// next |datalen| ciphertext bytes.
+//
+// |datalen| must be a multiple of 16, except on the last call where it can be
+// any length. The caller must do any buffering needed to ensure this. Both
+// in-place and out-of-place en/decryption are supported.
+//
+// |le_ctr| must give the current counter in little-endian format. For a new
+// message, the low word of the counter must be 2. This function loads the
+// counter from |le_ctr| and increments the loaded counter as needed, but it
+// does *not* store the updated counter back to |le_ctr|. The caller must
+// update |le_ctr| if any more data segments follow. Internally, only the low
+// 32-bit word of the counter is incremented, following the GCM standard.
+.macro _aes_gcm_update enc
+
+ // Function arguments
+ .set KEY, %rdi
+ .set LE_CTR_PTR, %rsi
+ .set GHASH_ACC_PTR, %rdx
+ .set SRC, %rcx
+ .set DST, %r8
+ .set DATALEN, %r9d
+ .set DATALEN64, %r9 // Zero-extend DATALEN before using!
+
+ // Additional local variables
+
+ // %rax and %k1 are used as temporary registers. LE_CTR_PTR is also
+ // available as a temporary register after the counter is loaded.
+
+ // AES key length in bytes
+ .set AESKEYLEN, %r10d
+ .set AESKEYLEN64, %r10
+
+ // Pointer to the last AES round key for the chosen AES variant
+ .set RNDKEYLAST_PTR, %r11
+
+ // In the main loop, V0-V3 are used as AES input and output. Elsewhere
+ // they are used as temporary registers.
+
+ // GHASHDATA[0-3] hold the ciphertext blocks and GHASH input data.
+ .set GHASHDATA0, V4
+ .set GHASHDATA0_XMM, %xmm4
+ .set GHASHDATA1, V5
+ .set GHASHDATA1_XMM, %xmm5
+ .set GHASHDATA2, V6
+ .set GHASHDATA2_XMM, %xmm6
+ .set GHASHDATA3, V7
+
+ // BSWAP_MASK is the shuffle mask for byte-reflecting 128-bit values
+ // using vpshufb, copied to all 128-bit lanes.
+ .set BSWAP_MASK, V8
+
+ // RNDKEY temporarily holds the next AES round key.
+ .set RNDKEY, V9
+
+ // GHASH_ACC is the accumulator variable for GHASH. When fully reduced,
+ // only the lowest 128-bit lane can be nonzero. When not fully reduced,
+ // more than one lane may be used, and they need to be XOR'd together.
+ .set GHASH_ACC, V10
+ .set GHASH_ACC_XMM, %xmm10
+
+ // LE_CTR_INC is the vector of 32-bit words that need to be added to a
+ // vector of little-endian counter blocks to advance it forwards.
+ .set LE_CTR_INC, V11
+
+ // LE_CTR contains the next set of little-endian counter blocks.
+ .set LE_CTR, V12
+
+ // RNDKEY0, RNDKEYLAST, and RNDKEY_M[9-5] contain cached AES round keys,
+ // copied to all 128-bit lanes. RNDKEY0 is the zero-th round key,
+ // RNDKEYLAST the last, and RNDKEY_M\i the one \i-th from the last.
+ .set RNDKEY0, V13
+ .set RNDKEYLAST, V14
+ .set RNDKEY_M9, V15
+ .set RNDKEY_M8, V16
+ .set RNDKEY_M7, V17
+ .set RNDKEY_M6, V18
+ .set RNDKEY_M5, V19
+
+ // RNDKEYLAST[0-3] temporarily store the last AES round key XOR'd with
+ // the corresponding block of source data. This is useful because
+ // vaesenclast(key, a) ^ b == vaesenclast(key ^ b, a), and key ^ b can
+ // be computed in parallel with the AES rounds.
+ .set RNDKEYLAST0, V20
+ .set RNDKEYLAST1, V21
+ .set RNDKEYLAST2, V22
+ .set RNDKEYLAST3, V23
+
+ // GHASHTMP[0-2] are temporary variables used by _ghash_step_4x. These
+ // cannot coincide with anything used for AES encryption, since for
+ // performance reasons GHASH and AES encryption are interleaved.
+ .set GHASHTMP0, V24
+ .set GHASHTMP1, V25
+ .set GHASHTMP2, V26
+
+ // H_POW[4-1] contain the powers of the hash key H^(4*VL/16)...H^1. The
+ // descending numbering reflects the order of the key powers.
+ .set H_POW4, V27
+ .set H_POW3, V28
+ .set H_POW2, V29
+ .set H_POW1, V30
+
+ // GFPOLY contains the .Lgfpoly constant, copied to all 128-bit lanes.
+ .set GFPOLY, V31
+
+ // Load some constants.
+ vbroadcasti32x4 .Lbswap_mask(%rip), BSWAP_MASK
+ vbroadcasti32x4 .Lgfpoly(%rip), GFPOLY
+
+ // Load the GHASH accumulator and the starting counter.
+ vmovdqu (GHASH_ACC_PTR), GHASH_ACC_XMM
+ vbroadcasti32x4 (LE_CTR_PTR), LE_CTR
+
+ // Load the AES key length in bytes.
+ movl OFFSETOF_AESKEYLEN(KEY), AESKEYLEN
+
+ // Make RNDKEYLAST_PTR point to the last AES round key. This is the
+ // round key with index 10, 12, or 14 for AES-128, AES-192, or AES-256
+ // respectively. Then load the zero-th and last round keys.
+ lea 6*16(KEY,AESKEYLEN64,4), RNDKEYLAST_PTR
+ vbroadcasti32x4 (KEY), RNDKEY0
+ vbroadcasti32x4 (RNDKEYLAST_PTR), RNDKEYLAST
+
+ // Finish initializing LE_CTR by adding [0, 1, ...] to its low words.
+ vpaddd .Lctr_pattern(%rip), LE_CTR, LE_CTR
+
+ // Initialize LE_CTR_INC to contain VL/16 in all 128-bit lanes.
+.if VL == 32
+ vbroadcasti32x4 .Linc_2blocks(%rip), LE_CTR_INC
+.elseif VL == 64
+ vbroadcasti32x4 .Linc_4blocks(%rip), LE_CTR_INC
+.else
+ .error "Unsupported vector length"
+.endif
+
+ // If there are at least 4*VL bytes of data, then continue into the loop
+ // that processes 4*VL bytes of data at a time. Otherwise skip it.
+ //
+ // Pre-subtracting 4*VL from DATALEN saves an instruction from the main
+ // loop and also ensures that at least one write always occurs to
+ // DATALEN, zero-extending it and allowing DATALEN64 to be used later.
+ sub $4*VL, DATALEN
+ jl .Lcrypt_loop_4x_done\@
+
+ // Load powers of the hash key.
+ vmovdqu8 OFFSETOFEND_H_POWERS-4*VL(KEY), H_POW4
+ vmovdqu8 OFFSETOFEND_H_POWERS-3*VL(KEY), H_POW3
+ vmovdqu8 OFFSETOFEND_H_POWERS-2*VL(KEY), H_POW2
+ vmovdqu8 OFFSETOFEND_H_POWERS-1*VL(KEY), H_POW1
+
+ // Main loop: en/decrypt and hash 4 vectors at a time.
+ //
+ // When possible, interleave the AES encryption of the counter blocks
+ // with the GHASH update of the ciphertext blocks. This improves
+ // performance on many CPUs because the execution ports used by the VAES
+ // instructions often differ from those used by vpclmulqdq and other
+ // instructions used in GHASH. For example, many Intel CPUs dispatch
+ // vaesenc to ports 0 and 1 and vpclmulqdq to port 5.
+ //
+ // The interleaving is easiest to do during decryption, since during
+ // decryption the ciphertext blocks are immediately available. For
+ // encryption, instead encrypt the first set of blocks, then hash those
+ // blocks while encrypting the next set of blocks, repeat that as
+ // needed, and finally hash the last set of blocks.
+
+.if \enc
+ // Encrypt the first 4 vectors of plaintext blocks. Leave the resulting
+ // ciphertext in GHASHDATA[0-3] for GHASH.
+ _ctr_begin_4x
+ lea 16(KEY), %rax
+1:
+ vbroadcasti32x4 (%rax), RNDKEY
+ _vaesenc_4x RNDKEY
+ add $16, %rax
+ cmp %rax, RNDKEYLAST_PTR
+ jne 1b
+ vpxord 0*VL(SRC), RNDKEYLAST, RNDKEYLAST0
+ vpxord 1*VL(SRC), RNDKEYLAST, RNDKEYLAST1
+ vpxord 2*VL(SRC), RNDKEYLAST, RNDKEYLAST2
+ vpxord 3*VL(SRC), RNDKEYLAST, RNDKEYLAST3
+ vaesenclast RNDKEYLAST0, V0, GHASHDATA0
+ vaesenclast RNDKEYLAST1, V1, GHASHDATA1
+ vaesenclast RNDKEYLAST2, V2, GHASHDATA2
+ vaesenclast RNDKEYLAST3, V3, GHASHDATA3
+ vmovdqu8 GHASHDATA0, 0*VL(DST)
+ vmovdqu8 GHASHDATA1, 1*VL(DST)
+ vmovdqu8 GHASHDATA2, 2*VL(DST)
+ vmovdqu8 GHASHDATA3, 3*VL(DST)
+ add $4*VL, SRC
+ add $4*VL, DST
+ sub $4*VL, DATALEN
+ jl .Lghash_last_ciphertext_4x\@
+.endif
+
+ // Cache as many additional AES round keys as possible.
+.irp i, 9,8,7,6,5
+ vbroadcasti32x4 -\i*16(RNDKEYLAST_PTR), RNDKEY_M\i
+.endr
+
+.Lcrypt_loop_4x\@:
+
+ // If decrypting, load more ciphertext blocks into GHASHDATA[0-3]. If
+ // encrypting, GHASHDATA[0-3] already contain the previous ciphertext.
+.if !\enc
+ vmovdqu8 0*VL(SRC), GHASHDATA0
+ vmovdqu8 1*VL(SRC), GHASHDATA1
+ vmovdqu8 2*VL(SRC), GHASHDATA2
+ vmovdqu8 3*VL(SRC), GHASHDATA3
+.endif
+
+ // Start the AES encryption of the counter blocks.
+ _ctr_begin_4x
+ cmp $24, AESKEYLEN
+ jl 128f // AES-128?
+ je 192f // AES-192?
+ // AES-256
+ vbroadcasti32x4 -13*16(RNDKEYLAST_PTR), RNDKEY
+ _vaesenc_4x RNDKEY
+ vbroadcasti32x4 -12*16(RNDKEYLAST_PTR), RNDKEY
+ _vaesenc_4x RNDKEY
+192:
+ vbroadcasti32x4 -11*16(RNDKEYLAST_PTR), RNDKEY
+ _vaesenc_4x RNDKEY
+ vbroadcasti32x4 -10*16(RNDKEYLAST_PTR), RNDKEY
+ _vaesenc_4x RNDKEY
+128:
+
+ // XOR the source data with the last round key, saving the result in
+ // RNDKEYLAST[0-3]. This reduces latency by taking advantage of the
+ // property vaesenclast(key, a) ^ b == vaesenclast(key ^ b, a).
+.if \enc
+ vpxord 0*VL(SRC), RNDKEYLAST, RNDKEYLAST0
+ vpxord 1*VL(SRC), RNDKEYLAST, RNDKEYLAST1
+ vpxord 2*VL(SRC), RNDKEYLAST, RNDKEYLAST2
+ vpxord 3*VL(SRC), RNDKEYLAST, RNDKEYLAST3
+.else
+ vpxord GHASHDATA0, RNDKEYLAST, RNDKEYLAST0
+ vpxord GHASHDATA1, RNDKEYLAST, RNDKEYLAST1
+ vpxord GHASHDATA2, RNDKEYLAST, RNDKEYLAST2
+ vpxord GHASHDATA3, RNDKEYLAST, RNDKEYLAST3
+.endif
+
+ // Finish the AES encryption of the counter blocks in V0-V3, interleaved
+ // with the GHASH update of the ciphertext blocks in GHASHDATA[0-3].
+.irp i, 9,8,7,6,5
+ _vaesenc_4x RNDKEY_M\i
+ _ghash_step_4x (9 - \i)
+.endr
+.irp i, 4,3,2,1
+ vbroadcasti32x4 -\i*16(RNDKEYLAST_PTR), RNDKEY
+ _vaesenc_4x RNDKEY
+ _ghash_step_4x (9 - \i)
+.endr
+ _ghash_step_4x 9
+
+ // Do the last AES round. This handles the XOR with the source data
+ // too, as per the optimization described above.
+ vaesenclast RNDKEYLAST0, V0, GHASHDATA0
+ vaesenclast RNDKEYLAST1, V1, GHASHDATA1
+ vaesenclast RNDKEYLAST2, V2, GHASHDATA2
+ vaesenclast RNDKEYLAST3, V3, GHASHDATA3
+
+ // Store the en/decrypted data to DST.
+ vmovdqu8 GHASHDATA0, 0*VL(DST)
+ vmovdqu8 GHASHDATA1, 1*VL(DST)
+ vmovdqu8 GHASHDATA2, 2*VL(DST)
+ vmovdqu8 GHASHDATA3, 3*VL(DST)
+
+ add $4*VL, SRC
+ add $4*VL, DST
+ sub $4*VL, DATALEN
+ jge .Lcrypt_loop_4x\@
+
+.if \enc
+.Lghash_last_ciphertext_4x\@:
+ // Update GHASH with the last set of ciphertext blocks.
+.irp i, 0,1,2,3,4,5,6,7,8,9
+ _ghash_step_4x \i
+.endr
+.endif
+
+.Lcrypt_loop_4x_done\@:
+
+ // Undo the extra subtraction by 4*VL and check whether data remains.
+ add $4*VL, DATALEN
+ jz .Ldone\@
+
+ // The data length isn't a multiple of 4*VL. Process the remaining data
+ // of length 1 <= DATALEN < 4*VL, up to one vector (VL bytes) at a time.
+ // Going one vector at a time may seem inefficient compared to having
+ // separate code paths for each possible number of vectors remaining.
+ // However, using a loop keeps the code size down, and it performs
+ // surprising well; modern CPUs will start executing the next iteration
+ // before the previous one finishes and also predict the number of loop
+ // iterations. For a similar reason, we roll up the AES rounds.
+ //
+ // On the last iteration, the remaining length may be less than VL.
+ // Handle this using masking.
+ //
+ // Since there are enough key powers available for all remaining data,
+ // there is no need to do a GHASH reduction after each iteration.
+ // Instead, multiply each remaining block by its own key power, and only
+ // do a GHASH reduction at the very end.
+
+ // Make POWERS_PTR point to the key powers [H^N, H^(N-1), ...] where N
+ // is the number of blocks that remain.
+ .set POWERS_PTR, LE_CTR_PTR // LE_CTR_PTR is free to be reused.
+ mov DATALEN, %eax
+ neg %rax
+ and $~15, %rax // -round_up(DATALEN, 16)
+ lea OFFSETOFEND_H_POWERS(KEY,%rax), POWERS_PTR
+
+ // Start collecting the unreduced GHASH intermediate value LO, MI, HI.
+ .set LO, GHASHDATA0
+ .set LO_XMM, GHASHDATA0_XMM
+ .set MI, GHASHDATA1
+ .set MI_XMM, GHASHDATA1_XMM
+ .set HI, GHASHDATA2
+ .set HI_XMM, GHASHDATA2_XMM
+ vpxor LO_XMM, LO_XMM, LO_XMM
+ vpxor MI_XMM, MI_XMM, MI_XMM
+ vpxor HI_XMM, HI_XMM, HI_XMM
+
+.Lcrypt_loop_1x\@:
+
+ // Select the appropriate mask for this iteration: all 1's if
+ // DATALEN >= VL, otherwise DATALEN 1's. Do this branchlessly using the
+ // bzhi instruction from BMI2. (This relies on DATALEN <= 255.)
+.if VL < 64
+ mov $-1, %eax
+ bzhi DATALEN, %eax, %eax
+ kmovd %eax, %k1
+.else
+ mov $-1, %rax
+ bzhi DATALEN64, %rax, %rax
+ kmovq %rax, %k1
+.endif
+
+ // Encrypt a vector of counter blocks. This does not need to be masked.
+ vpshufb BSWAP_MASK, LE_CTR, V0
+ vpaddd LE_CTR_INC, LE_CTR, LE_CTR
+ vpxord RNDKEY0, V0, V0
+ lea 16(KEY), %rax
+1:
+ vbroadcasti32x4 (%rax), RNDKEY
+ vaesenc RNDKEY, V0, V0
+ add $16, %rax
+ cmp %rax, RNDKEYLAST_PTR
+ jne 1b
+ vaesenclast RNDKEYLAST, V0, V0
+
+ // XOR the data with the appropriate number of keystream bytes.
+ vmovdqu8 (SRC), V1{%k1}{z}
+ vpxord V1, V0, V0
+ vmovdqu8 V0, (DST){%k1}
+
+ // Update GHASH with the ciphertext block(s), without reducing.
+ //
+ // In the case of DATALEN < VL, the ciphertext is zero-padded to VL.
+ // (If decrypting, it's done by the above masked load. If encrypting,
+ // it's done by the below masked register-to-register move.) Note that
+ // if DATALEN <= VL - 16, there will be additional padding beyond the
+ // padding of the last block specified by GHASH itself; i.e., there may
+ // be whole block(s) that get processed by the GHASH multiplication and
+ // reduction instructions but should not actually be included in the
+ // GHASH. However, any such blocks are all-zeroes, and the values that
+ // they're multiplied with are also all-zeroes. Therefore they just add
+ // 0 * 0 = 0 to the final GHASH result, which makes no difference.
+ vmovdqu8 (POWERS_PTR), H_POW1
+.if \enc
+ vmovdqu8 V0, V1{%k1}{z}
+.endif
+ vpshufb BSWAP_MASK, V1, V0
+ vpxord GHASH_ACC, V0, V0
+ _ghash_mul_noreduce H_POW1, V0, LO, MI, HI, GHASHDATA3, V1, V2, V3
+ vpxor GHASH_ACC_XMM, GHASH_ACC_XMM, GHASH_ACC_XMM
+
+ add $VL, POWERS_PTR
+ add $VL, SRC
+ add $VL, DST
+ sub $VL, DATALEN
+ jg .Lcrypt_loop_1x\@
+
+ // Finally, do the GHASH reduction.
+ _ghash_reduce LO, MI, HI, GFPOLY, V0
+ _horizontal_xor HI, HI_XMM, GHASH_ACC_XMM, %xmm0, %xmm1, %xmm2
+
+.Ldone\@:
+ // Store the updated GHASH accumulator back to memory.
+ vmovdqu GHASH_ACC_XMM, (GHASH_ACC_PTR)
+
+ vzeroupper // This is needed after using ymm or zmm registers.
+ RET
+.endm
+
+// void aes_gcm_enc_final_vaes_avx10(const struct aes_gcm_key_avx10 *key,
+// const u32 le_ctr[4], u8 ghash_acc[16],
+// u64 total_aadlen, u64 total_datalen);
+// bool aes_gcm_dec_final_vaes_avx10(const struct aes_gcm_key_avx10 *key,
+// const u32 le_ctr[4],
+// const u8 ghash_acc[16],
+// u64 total_aadlen, u64 total_datalen,
+// const u8 tag[16], int taglen);
+//
+// This macro generates one of the above two functions (with \enc selecting
+// which one). Both functions finish computing the GCM authentication tag by
+// updating GHASH with the lengths block and encrypting the GHASH accumulator.
+// |total_aadlen| and |total_datalen| must be the total length of the additional
+// authenticated data and the en/decrypted data in bytes, respectively.
+//
+// The encryption function then stores the full-length (16-byte) computed
+// authentication tag to |ghash_acc|. The decryption function instead loads the
+// expected authentication tag (the one that was transmitted) from the 16-byte
+// buffer |tag|, compares the first 4 <= |taglen| <= 16 bytes of it to the
+// computed tag in constant time, and returns true if and only if they match.
+.macro _aes_gcm_final enc
+
+ // Function arguments
+ .set KEY, %rdi
+ .set LE_CTR_PTR, %rsi
+ .set GHASH_ACC_PTR, %rdx
+ .set TOTAL_AADLEN, %rcx
+ .set TOTAL_DATALEN, %r8
+ .set TAG, %r9
+ .set TAGLEN, %r10d // Originally at 8(%rsp)
+
+ // Additional local variables.
+ // %rax, %xmm0-%xmm3, and %k1 are used as temporary registers.
+ .set AESKEYLEN, %r11d
+ .set AESKEYLEN64, %r11
+ .set GFPOLY, %xmm4
+ .set BSWAP_MASK, %xmm5
+ .set LE_CTR, %xmm6
+ .set GHASH_ACC, %xmm7
+ .set H_POW1, %xmm8
+
+ // Load some constants.
+ vmovdqa .Lgfpoly(%rip), GFPOLY
+ vmovdqa .Lbswap_mask(%rip), BSWAP_MASK
+
+ // Load the AES key length in bytes.
+ movl OFFSETOF_AESKEYLEN(KEY), AESKEYLEN
+
+ // Set up a counter block with 1 in the low 32-bit word. This is the
+ // counter that produces the ciphertext needed to encrypt the auth tag.
+ // GFPOLY has 1 in the low word, so grab the 1 from there using a blend.
+ vpblendd $0xe, (LE_CTR_PTR), GFPOLY, LE_CTR
+
+ // Build the lengths block and XOR it with the GHASH accumulator.
+ // Although the lengths block is defined as the AAD length followed by
+ // the en/decrypted data length, both in big-endian byte order, a byte
+ // reflection of the full block is needed because of the way we compute
+ // GHASH (see _ghash_mul_step). By using little-endian values in the
+ // opposite order, we avoid having to reflect any bytes here.
+ vmovq TOTAL_DATALEN, %xmm0
+ vpinsrq $1, TOTAL_AADLEN, %xmm0, %xmm0
+ vpsllq $3, %xmm0, %xmm0 // Bytes to bits
+ vpxor (GHASH_ACC_PTR), %xmm0, GHASH_ACC
+
+ // Load the first hash key power (H^1), which is stored last.
+ vmovdqu8 OFFSETOFEND_H_POWERS-16(KEY), H_POW1
+
+.if !\enc
+ // Prepare a mask of TAGLEN one bits.
+ movl 8(%rsp), TAGLEN
+ mov $-1, %eax
+ bzhi TAGLEN, %eax, %eax
+ kmovd %eax, %k1
+.endif
+
+ // Make %rax point to the last AES round key for the chosen AES variant.
+ lea 6*16(KEY,AESKEYLEN64,4), %rax
+
+ // Start the AES encryption of the counter block by swapping the counter
+ // block to big-endian and XOR-ing it with the zero-th AES round key.
+ vpshufb BSWAP_MASK, LE_CTR, %xmm0
+ vpxor (KEY), %xmm0, %xmm0
+
+ // Complete the AES encryption and multiply GHASH_ACC by H^1.
+ // Interleave the AES and GHASH instructions to improve performance.
+ cmp $24, AESKEYLEN
+ jl 128f // AES-128?
+ je 192f // AES-192?
+ // AES-256
+ vaesenc -13*16(%rax), %xmm0, %xmm0
+ vaesenc -12*16(%rax), %xmm0, %xmm0
+192:
+ vaesenc -11*16(%rax), %xmm0, %xmm0
+ vaesenc -10*16(%rax), %xmm0, %xmm0
+128:
+.irp i, 0,1,2,3,4,5,6,7,8
+ _ghash_mul_step \i, H_POW1, GHASH_ACC, GHASH_ACC, GFPOLY, \
+ %xmm1, %xmm2, %xmm3
+ vaesenc (\i-9)*16(%rax), %xmm0, %xmm0
+.endr
+ _ghash_mul_step 9, H_POW1, GHASH_ACC, GHASH_ACC, GFPOLY, \
+ %xmm1, %xmm2, %xmm3
+
+ // Undo the byte reflection of the GHASH accumulator.
+ vpshufb BSWAP_MASK, GHASH_ACC, GHASH_ACC
+
+ // Do the last AES round and XOR the resulting keystream block with the
+ // GHASH accumulator to produce the full computed authentication tag.
+ //
+ // Reduce latency by taking advantage of the property vaesenclast(key,
+ // a) ^ b == vaesenclast(key ^ b, a). I.e., XOR GHASH_ACC into the last
+ // round key, instead of XOR'ing the final AES output with GHASH_ACC.
+ //
+ // enc_final then returns the computed auth tag, while dec_final
+ // compares it with the transmitted one and returns a bool. To compare
+ // the tags, dec_final XORs them together and uses vptest to check
+ // whether the result is all-zeroes. This should be constant-time.
+ // dec_final applies the vaesenclast optimization to this additional
+ // value XOR'd too, using vpternlogd to XOR the last round key, GHASH
+ // accumulator, and transmitted auth tag together in one instruction.
+.if \enc
+ vpxor (%rax), GHASH_ACC, %xmm1
+ vaesenclast %xmm1, %xmm0, GHASH_ACC
+ vmovdqu GHASH_ACC, (GHASH_ACC_PTR)
+.else
+ vmovdqu (TAG), %xmm1
+ vpternlogd $0x96, (%rax), GHASH_ACC, %xmm1
+ vaesenclast %xmm1, %xmm0, %xmm0
+ xor %eax, %eax
+ vmovdqu8 %xmm0, %xmm0{%k1}{z} // Truncate to TAGLEN bytes
+ vptest %xmm0, %xmm0
+ sete %al
+.endif
+ // No need for vzeroupper here, since only used xmm registers were used.
+ RET
+.endm
+
+_set_veclen 32
+SYM_FUNC_START(aes_gcm_precompute_vaes_avx10_256)
+ _aes_gcm_precompute
+SYM_FUNC_END(aes_gcm_precompute_vaes_avx10_256)
+SYM_FUNC_START(aes_gcm_enc_update_vaes_avx10_256)
+ _aes_gcm_update 1
+SYM_FUNC_END(aes_gcm_enc_update_vaes_avx10_256)
+SYM_FUNC_START(aes_gcm_dec_update_vaes_avx10_256)
+ _aes_gcm_update 0
+SYM_FUNC_END(aes_gcm_dec_update_vaes_avx10_256)
+
+_set_veclen 64
+SYM_FUNC_START(aes_gcm_precompute_vaes_avx10_512)
+ _aes_gcm_precompute
+SYM_FUNC_END(aes_gcm_precompute_vaes_avx10_512)
+SYM_FUNC_START(aes_gcm_enc_update_vaes_avx10_512)
+ _aes_gcm_update 1
+SYM_FUNC_END(aes_gcm_enc_update_vaes_avx10_512)
+SYM_FUNC_START(aes_gcm_dec_update_vaes_avx10_512)
+ _aes_gcm_update 0
+SYM_FUNC_END(aes_gcm_dec_update_vaes_avx10_512)
+
+// void aes_gcm_aad_update_vaes_avx10(const struct aes_gcm_key_avx10 *key,
+// u8 ghash_acc[16],
+// const u8 *aad, int aadlen);
+//
+// This function processes the AAD (Additional Authenticated Data) in GCM.
+// Using the key |key|, it updates the GHASH accumulator |ghash_acc| with the
+// data given by |aad| and |aadlen|. |key->ghash_key_powers| must have been
+// initialized. On the first call, |ghash_acc| must be all zeroes. |aadlen|
+// must be a multiple of 16, except on the last call where it can be any length.
+// The caller must do any buffering needed to ensure this.
+//
+// AES-GCM is almost always used with small amounts of AAD, less than 32 bytes.
+// Therefore, for AAD processing we currently only provide this implementation
+// which uses 256-bit vectors (ymm registers) and only has a 1x-wide loop. This
+// keeps the code size down, and it enables some micro-optimizations, e.g. using
+// VEX-coded instructions instead of EVEX-coded to save some instruction bytes.
+// To optimize for large amounts of AAD, we could implement a 4x-wide loop and
+// provide a version using 512-bit vectors, but that doesn't seem to be useful.
+SYM_FUNC_START(aes_gcm_aad_update_vaes_avx10)
+
+ // Function arguments
+ .set KEY, %rdi
+ .set GHASH_ACC_PTR, %rsi
+ .set AAD, %rdx
+ .set AADLEN, %ecx
+ .set AADLEN64, %rcx // Zero-extend AADLEN before using!
+
+ // Additional local variables.
+ // %rax, %ymm0-%ymm3, and %k1 are used as temporary registers.
+ .set BSWAP_MASK, %ymm4
+ .set GFPOLY, %ymm5
+ .set GHASH_ACC, %ymm6
+ .set GHASH_ACC_XMM, %xmm6
+ .set H_POW1, %ymm7
+
+ // Load some constants.
+ vbroadcasti128 .Lbswap_mask(%rip), BSWAP_MASK
+ vbroadcasti128 .Lgfpoly(%rip), GFPOLY
+
+ // Load the GHASH accumulator.
+ vmovdqu (GHASH_ACC_PTR), GHASH_ACC_XMM
+
+ // Update GHASH with 32 bytes of AAD at a time.
+ //
+ // Pre-subtracting 32 from AADLEN saves an instruction from the loop and
+ // also ensures that at least one write always occurs to AADLEN,
+ // zero-extending it and allowing AADLEN64 to be used later.
+ sub $32, AADLEN
+ jl .Laad_loop_1x_done
+ vmovdqu8 OFFSETOFEND_H_POWERS-32(KEY), H_POW1 // [H^2, H^1]
+.Laad_loop_1x:
+ vmovdqu (AAD), %ymm0
+ vpshufb BSWAP_MASK, %ymm0, %ymm0
+ vpxor %ymm0, GHASH_ACC, GHASH_ACC
+ _ghash_mul H_POW1, GHASH_ACC, GHASH_ACC, GFPOLY, \
+ %ymm0, %ymm1, %ymm2
+ vextracti128 $1, GHASH_ACC, %xmm0
+ vpxor %xmm0, GHASH_ACC_XMM, GHASH_ACC_XMM
+ add $32, AAD
+ sub $32, AADLEN
+ jge .Laad_loop_1x
+.Laad_loop_1x_done:
+ add $32, AADLEN
+ jz .Laad_done
+
+ // Update GHASH with the remaining 1 <= AADLEN < 32 bytes of AAD.
+ mov $-1, %eax
+ bzhi AADLEN, %eax, %eax
+ kmovd %eax, %k1
+ vmovdqu8 (AAD), %ymm0{%k1}{z}
+ neg AADLEN64
+ and $~15, AADLEN64 // -round_up(AADLEN, 16)
+ vmovdqu8 OFFSETOFEND_H_POWERS(KEY,AADLEN64), H_POW1
+ vpshufb BSWAP_MASK, %ymm0, %ymm0
+ vpxor %ymm0, GHASH_ACC, GHASH_ACC
+ _ghash_mul H_POW1, GHASH_ACC, GHASH_ACC, GFPOLY, \
+ %ymm0, %ymm1, %ymm2
+ vextracti128 $1, GHASH_ACC, %xmm0
+ vpxor %xmm0, GHASH_ACC_XMM, GHASH_ACC_XMM
+
+.Laad_done:
+ // Store the updated GHASH accumulator back to memory.
+ vmovdqu GHASH_ACC_XMM, (GHASH_ACC_PTR)
+
+ vzeroupper // This is needed after using ymm or zmm registers.
+ RET
+SYM_FUNC_END(aes_gcm_aad_update_vaes_avx10)
+
+SYM_FUNC_START(aes_gcm_enc_final_vaes_avx10)
+ _aes_gcm_final 1
+SYM_FUNC_END(aes_gcm_enc_final_vaes_avx10)
+SYM_FUNC_START(aes_gcm_dec_final_vaes_avx10)
+ _aes_gcm_final 0
+SYM_FUNC_END(aes_gcm_dec_final_vaes_avx10)
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index ef031655b2d3f..1c48b3a4b4e91 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -1,9 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Support for Intel AES-NI instructions. This file contains glue
- * code, the real AES implementation is in intel-aes_asm.S.
+ * Support for AES-NI and VAES instructions. This file contains glue code.
+ * The real AES implementations are in aesni-intel_asm.S and other .S files.
*
* Copyright (C) 2008, Intel Corp.
* Author: Huang Ying <ying.huang@...el.com>
*
* Added RFC4106 AES-GCM support for 128-bit keys under the AEAD
@@ -11,10 +11,12 @@
* Authors: Adrian Hoban <adrian.hoban@...el.com>
* Gabriele Paoloni <gabriele.paoloni@...el.com>
* Tadeusz Struk (tadeusz.struk@...el.com)
* Aidan O'Mahony (aidan.o.mahony@...el.com)
* Copyright (c) 2010, Intel Corporation.
+ *
+ * Copyright 2024 Google LLC
*/
#include <linux/hardirq.h>
#include <linux/types.h>
#include <linux/module.h>
@@ -1212,17 +1214,509 @@ static struct simd_skcipher_alg *aes_xts_simdalg_##suffix
DEFINE_XTS_ALG(aesni_avx, "xts-aes-aesni-avx", 500);
#if defined(CONFIG_AS_VAES) && defined(CONFIG_AS_VPCLMULQDQ)
DEFINE_XTS_ALG(vaes_avx2, "xts-aes-vaes-avx2", 600);
DEFINE_XTS_ALG(vaes_avx10_256, "xts-aes-vaes-avx10_256", 700);
DEFINE_XTS_ALG(vaes_avx10_512, "xts-aes-vaes-avx10_512", 800);
-#endif
+
+/* The common part of the x86_64 AES-GCM key struct */
+struct aes_gcm_key {
+ /* Expanded AES key and the AES key length in bytes */
+ struct crypto_aes_ctx aes_key;
+
+ /* RFC4106 nonce (used only by the rfc4106 algorithms) */
+ u32 rfc4106_nonce;
+};
+
+/* Key struct used by the VAES + AVX10 implementations of AES-GCM */
+struct aes_gcm_key_avx10 {
+ /*
+ * Common part of the key. The assembly code prefers 16-byte alignment
+ * for the round keys; we get this by them being located at the start of
+ * the struct and the whole struct being 64-byte aligned.
+ */
+ struct aes_gcm_key base;
+
+ /*
+ * Powers of the hash key H^16 through H^1. All entries have an extra
+ * factor of x^-1 and are byte-reversed. This is aligned to a 64-byte
+ * boundary to make it naturally aligned for 512-bit loads, which may
+ * improve performance on some CPUs. (The assembly code doesn't *need*
+ * the alignment; this is just an optimization.)
+ */
+ u8 h_powers[16][16] __aligned(64);
+
+ /* Three padding blocks required by the assembly code */
+ u8 padding[3][16];
+};
+#define AES_GCM_KEY_AVX10(key) \
+ container_of((key), struct aes_gcm_key_avx10, base)
+#define AES_GCM_KEY_AVX10_SIZE \
+ (sizeof(struct aes_gcm_key_avx10) + (63 & ~(CRYPTO_MINALIGN - 1)))
+
+/*
+ * These flags are passed to the AES-GCM helper functions to specify the
+ * specific version of AES-GCM (RFC4106 or not), whether it's encryption or
+ * decryption, and which assembly functions should be called. Assembly
+ * functions are selected using flags instead of function pointers to avoid
+ * indirect calls (which are very expensive on x86) regardless of inlining.
+ */
+#define FLAG_RFC4106 BIT(0)
+#define FLAG_ENC BIT(1)
+#define FLAG_AVX10_512 BIT(2)
+
+static inline struct aes_gcm_key *
+aes_gcm_key_get(struct crypto_aead *tfm, int flags)
+{
+ return PTR_ALIGN(crypto_aead_ctx(tfm), 64);
+}
+
+asmlinkage void
+aes_gcm_precompute_vaes_avx10_256(struct aes_gcm_key_avx10 *key);
+asmlinkage void
+aes_gcm_precompute_vaes_avx10_512(struct aes_gcm_key_avx10 *key);
+
+static void aes_gcm_precompute(struct aes_gcm_key *key, int flags)
+{
+ /*
+ * To make things a bit easier on the assembly side, the AVX10
+ * implementations use the same key format. Therefore, a single
+ * function using 256-bit vectors would suffice here. However, it's
+ * straightforward to provide a 512-bit one because of how the assembly
+ * code is structured, and it works nicely because the total size of the
+ * key powers is a multiple of 512 bits. So we take advantage of that.
+ */
+ if (flags & FLAG_AVX10_512)
+ aes_gcm_precompute_vaes_avx10_512(AES_GCM_KEY_AVX10(key));
+ else
+ aes_gcm_precompute_vaes_avx10_256(AES_GCM_KEY_AVX10(key));
+}
+
+asmlinkage void
+aes_gcm_aad_update_vaes_avx10(const struct aes_gcm_key_avx10 *key,
+ u8 ghash_acc[16], const u8 *aad, int aadlen);
+
+static void aes_gcm_aad_update(const struct aes_gcm_key *key, u8 ghash_acc[16],
+ const u8 *aad, int aadlen, int flags)
+{
+ aes_gcm_aad_update_vaes_avx10(AES_GCM_KEY_AVX10(key), ghash_acc,
+ aad, aadlen);
+}
+
+asmlinkage void
+aes_gcm_enc_update_vaes_avx10_256(const struct aes_gcm_key_avx10 *key,
+ const u32 le_ctr[4], u8 ghash_acc[16],
+ const u8 *src, u8 *dst, int datalen);
+asmlinkage void
+aes_gcm_enc_update_vaes_avx10_512(const struct aes_gcm_key_avx10 *key,
+ const u32 le_ctr[4], u8 ghash_acc[16],
+ const u8 *src, u8 *dst, int datalen);
+
+asmlinkage void
+aes_gcm_dec_update_vaes_avx10_256(const struct aes_gcm_key_avx10 *key,
+ const u32 le_ctr[4], u8 ghash_acc[16],
+ const u8 *src, u8 *dst, int datalen);
+asmlinkage void
+aes_gcm_dec_update_vaes_avx10_512(const struct aes_gcm_key_avx10 *key,
+ const u32 le_ctr[4], u8 ghash_acc[16],
+ const u8 *src, u8 *dst, int datalen);
+
+/* __always_inline to optimize out the branches based on @flags */
+static __always_inline void
+aes_gcm_update(const struct aes_gcm_key *key,
+ const u32 le_ctr[4], u8 ghash_acc[16],
+ const u8 *src, u8 *dst, int datalen, int flags)
+{
+ if (flags & FLAG_ENC) {
+ if (flags & FLAG_AVX10_512)
+ aes_gcm_enc_update_vaes_avx10_512(AES_GCM_KEY_AVX10(key),
+ le_ctr, ghash_acc,
+ src, dst, datalen);
+ else
+ aes_gcm_enc_update_vaes_avx10_256(AES_GCM_KEY_AVX10(key),
+ le_ctr, ghash_acc,
+ src, dst, datalen);
+ } else {
+ if (flags & FLAG_AVX10_512)
+ aes_gcm_dec_update_vaes_avx10_512(AES_GCM_KEY_AVX10(key),
+ le_ctr, ghash_acc,
+ src, dst, datalen);
+ else
+ aes_gcm_dec_update_vaes_avx10_256(AES_GCM_KEY_AVX10(key),
+ le_ctr, ghash_acc,
+ src, dst, datalen);
+ }
+}
+
+asmlinkage void
+aes_gcm_enc_final_vaes_avx10(const struct aes_gcm_key_avx10 *key,
+ const u32 le_ctr[4], u8 ghash_acc[16],
+ u64 total_aadlen, u64 total_datalen);
+
+/* __always_inline to optimize out the branches based on @flags */
+static __always_inline void
+aes_gcm_enc_final(const struct aes_gcm_key *key,
+ const u32 le_ctr[4], u8 ghash_acc[16],
+ u64 total_aadlen, u64 total_datalen, int flags)
+{
+ aes_gcm_enc_final_vaes_avx10(AES_GCM_KEY_AVX10(key),
+ le_ctr, ghash_acc,
+ total_aadlen, total_datalen);
+}
+
+asmlinkage bool __must_check
+aes_gcm_dec_final_vaes_avx10(const struct aes_gcm_key_avx10 *key,
+ const u32 le_ctr[4], const u8 ghash_acc[16],
+ u64 total_aadlen, u64 total_datalen,
+ const u8 tag[16], int taglen);
+
+/* __always_inline to optimize out the branches based on @flags */
+static __always_inline bool __must_check
+aes_gcm_dec_final(const struct aes_gcm_key *key, const u32 le_ctr[4],
+ u8 ghash_acc[16], u64 total_aadlen, u64 total_datalen,
+ u8 tag[16], int taglen, int flags)
+{
+ return aes_gcm_dec_final_vaes_avx10(AES_GCM_KEY_AVX10(key),
+ le_ctr, ghash_acc,
+ total_aadlen, total_datalen,
+ tag, taglen);
+}
+
+/*
+ * This is the setkey function for the x86_64 implementations of AES-GCM. It
+ * saves the RFC4106 nonce if applicable, expands the AES key, and precomputes
+ * powers of the hash key.
+ *
+ * To comply with the crypto_aead API, this has to be usable in no-SIMD context.
+ * For that reason, this function includes a portable C implementation of the
+ * needed logic. However, the portable C implementation is very slow, taking
+ * about the same time as encrypting 37 KB of data. To be ready for users that
+ * may set a key even somewhat frequently, we therefore also include a SIMD
+ * assembly implementation, expanding the AES key using AES-NI and precomputing
+ * the hash key powers using PCLMULQDQ or VPCLMULQDQ.
+ */
+static int gcm_setkey(struct crypto_aead *tfm, const u8 *raw_key,
+ unsigned int keylen, int flags)
+{
+ struct aes_gcm_key *key = aes_gcm_key_get(tfm, flags);
+ int err;
+
+ if (flags & FLAG_RFC4106) {
+ if (keylen < 4)
+ return -EINVAL;
+ keylen -= 4;
+ key->rfc4106_nonce = get_unaligned_be32(raw_key + keylen);
+ }
+
+ /* The assembly code assumes the following offsets. */
+ BUILD_BUG_ON(offsetof(struct aes_gcm_key_avx10, base.aes_key.key_enc) != 0);
+ BUILD_BUG_ON(offsetof(struct aes_gcm_key_avx10, base.aes_key.key_length) != 480);
+ BUILD_BUG_ON(offsetof(struct aes_gcm_key_avx10, h_powers) != 512);
+ BUILD_BUG_ON(offsetof(struct aes_gcm_key_avx10, padding) != 768);
+
+ if (likely(crypto_simd_usable())) {
+ err = aes_check_keylen(keylen);
+ if (err)
+ return err;
+ kernel_fpu_begin();
+ aesni_set_key(&key->aes_key, raw_key, keylen);
+ aes_gcm_precompute(key, flags);
+ kernel_fpu_end();
+ } else {
+ static const u8 x_to_the_minus1[16] __aligned(__alignof__(be128)) = {
+ [0] = 0xc2, [15] = 1
+ };
+ struct aes_gcm_key_avx10 *k = AES_GCM_KEY_AVX10(key);
+ be128 h1 = {};
+ be128 h;
+ int i;
+
+ err = aes_expandkey(&key->aes_key, raw_key, keylen);
+ if (err)
+ return err;
+
+ /* Encrypt the all-zeroes block to get the hash key H^1 */
+ aes_encrypt(&key->aes_key, (u8 *)&h1, (u8 *)&h1);
+
+ /* Compute H^1 * x^-1 */
+ h = h1;
+ gf128mul_lle(&h, (const be128 *)x_to_the_minus1);
+
+ /* Compute the needed key powers */
+ for (i = ARRAY_SIZE(k->h_powers) - 1; i >= 0; i--) {
+ put_unaligned_be64(h.a, &k->h_powers[i][8]);
+ put_unaligned_be64(h.b, &k->h_powers[i][0]);
+ gf128mul_lle(&h, &h1);
+ }
+ memset(k->padding, 0, sizeof(k->padding));
+ }
+ return 0;
+}
+
+/*
+ * Initialize @ghash_acc, then pass all @assoclen bytes of associated data
+ * (a.k.a. additional authenticated data) from @sg_src through the GHASH update
+ * assembly function. kernel_fpu_begin() must have already been called.
+ */
+static void gcm_process_assoc(const struct aes_gcm_key *key, u8 ghash_acc[16],
+ struct scatterlist *sg_src, unsigned int assoclen,
+ int flags)
+{
+ struct scatter_walk walk;
+ /*
+ * The assembly function requires that the length of any non-last
+ * segment of associated data be a multiple of 16 bytes, so this
+ * function does the buffering needed to achieve that.
+ */
+ unsigned int pos = 0;
+ u8 buf[16];
+
+ memset(ghash_acc, 0, 16);
+ scatterwalk_start(&walk, sg_src);
+
+ while (assoclen) {
+ unsigned int len_this_page = scatterwalk_clamp(&walk, assoclen);
+ void *mapped = scatterwalk_map(&walk);
+ const void *src = mapped;
+ unsigned int len;
+
+ assoclen -= len_this_page;
+ scatterwalk_advance(&walk, len_this_page);
+ if (unlikely(pos)) {
+ len = min(len_this_page, 16 - pos);
+ memcpy(&buf[pos], src, len);
+ pos += len;
+ src += len;
+ len_this_page -= len;
+ if (pos < 16)
+ goto next;
+ aes_gcm_aad_update(key, ghash_acc, buf, 16, flags);
+ pos = 0;
+ }
+ len = len_this_page;
+ if (unlikely(assoclen)) /* Not the last segment yet? */
+ len = round_down(len, 16);
+ aes_gcm_aad_update(key, ghash_acc, src, len, flags);
+ src += len;
+ len_this_page -= len;
+ if (unlikely(len_this_page)) {
+ memcpy(buf, src, len_this_page);
+ pos = len_this_page;
+ }
+next:
+ scatterwalk_unmap(mapped);
+ scatterwalk_pagedone(&walk, 0, assoclen);
+ if (need_resched()) {
+ kernel_fpu_end();
+ kernel_fpu_begin();
+ }
+ }
+ if (unlikely(pos))
+ aes_gcm_aad_update(key, ghash_acc, buf, pos, flags);
+}
+
+
+/* __always_inline to optimize out the branches based on @flags */
+static __always_inline int
+gcm_crypt(struct aead_request *req, int flags)
+{
+ struct crypto_aead *tfm = crypto_aead_reqtfm(req);
+ const struct aes_gcm_key *key = aes_gcm_key_get(tfm, flags);
+ unsigned int assoclen = req->assoclen;
+ struct skcipher_walk walk;
+ unsigned int nbytes;
+ u8 ghash_acc[16]; /* GHASH accumulator */
+ u32 le_ctr[4]; /* Counter in little-endian format */
+ int taglen;
+ int err;
+
+ /* Initialize the counter and determine the associated data length. */
+ le_ctr[0] = 2;
+ if (flags & FLAG_RFC4106) {
+ if (unlikely(assoclen != 16 && assoclen != 20))
+ return -EINVAL;
+ assoclen -= 8;
+ le_ctr[1] = get_unaligned_be32(req->iv + 4);
+ le_ctr[2] = get_unaligned_be32(req->iv + 0);
+ le_ctr[3] = key->rfc4106_nonce; /* already byte-swapped */
+ } else {
+ le_ctr[1] = get_unaligned_be32(req->iv + 8);
+ le_ctr[2] = get_unaligned_be32(req->iv + 4);
+ le_ctr[3] = get_unaligned_be32(req->iv + 0);
+ }
+
+ /* Begin walking through the plaintext or ciphertext. */
+ if (flags & FLAG_ENC)
+ err = skcipher_walk_aead_encrypt(&walk, req, false);
+ else
+ err = skcipher_walk_aead_decrypt(&walk, req, false);
+
+ /*
+ * Since the AES-GCM assembly code requires that at least three assembly
+ * functions be called to process any message (this is needed to support
+ * incremental updates cleanly), to reduce overhead we try to do all
+ * three calls in the same kernel FPU section if possible. We close the
+ * section and start a new one if there are multiple data segments or if
+ * rescheduling is needed while processing the associated data.
+ */
+ kernel_fpu_begin();
+
+ /* Pass the associated data through GHASH. */
+ gcm_process_assoc(key, ghash_acc, req->src, assoclen, flags);
+
+ /* En/decrypt the data and pass the ciphertext through GHASH. */
+ while ((nbytes = walk.nbytes) != 0) {
+ if (unlikely(nbytes < walk.total)) {
+ /*
+ * Non-last segment. In this case, the assembly
+ * function requires that the length be a multiple of 16
+ * (AES_BLOCK_SIZE) bytes. The needed buffering of up
+ * to 16 bytes is handled by the skcipher_walk. Here we
+ * just need to round down to a multiple of 16.
+ */
+ nbytes = round_down(nbytes, AES_BLOCK_SIZE);
+ aes_gcm_update(key, le_ctr, ghash_acc,
+ walk.src.virt.addr, walk.dst.virt.addr,
+ nbytes, flags);
+ le_ctr[0] += nbytes / AES_BLOCK_SIZE;
+ kernel_fpu_end();
+ err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+ kernel_fpu_begin();
+ } else {
+ /* Last segment: process all remaining data. */
+ aes_gcm_update(key, le_ctr, ghash_acc,
+ walk.src.virt.addr, walk.dst.virt.addr,
+ nbytes, flags);
+ err = skcipher_walk_done(&walk, 0);
+ /*
+ * The low word of the counter isn't used by the
+ * finalize, so there's no need to increment it here.
+ */
+ }
+ }
+ if (err)
+ goto out;
+
+ /* Finalize */
+ taglen = crypto_aead_authsize(tfm);
+ if (flags & FLAG_ENC) {
+ /* Finish computing the auth tag. */
+ aes_gcm_enc_final(key, le_ctr, ghash_acc, assoclen,
+ req->cryptlen, flags);
+
+ /* Store the computed auth tag in the dst scatterlist. */
+ scatterwalk_map_and_copy(ghash_acc, req->dst, req->assoclen +
+ req->cryptlen, taglen, 1);
+ } else {
+ unsigned int datalen = req->cryptlen - taglen;
+ u8 tag[16];
+
+ /* Get the transmitted auth tag from the src scatterlist. */
+ scatterwalk_map_and_copy(tag, req->src, req->assoclen + datalen,
+ taglen, 0);
+ /*
+ * Finish computing the auth tag and compare it to the
+ * transmitted one. The assembly function does the actual tag
+ * comparison. Here, just check the boolean result.
+ */
+ if (!aes_gcm_dec_final(key, le_ctr, ghash_acc, assoclen,
+ datalen, tag, taglen, flags))
+ err = -EBADMSG;
+ }
+out:
+ kernel_fpu_end();
+ return err;
+}
+
+#define DEFINE_GCM_ALGS(suffix, flags, generic_driver_name, rfc_driver_name, \
+ ctxsize, priority) \
+ \
+static int gcm_setkey_##suffix(struct crypto_aead *tfm, const u8 *raw_key, \
+ unsigned int keylen) \
+{ \
+ return gcm_setkey(tfm, raw_key, keylen, (flags)); \
+} \
+ \
+static int gcm_encrypt_##suffix(struct aead_request *req) \
+{ \
+ return gcm_crypt(req, (flags) | FLAG_ENC); \
+} \
+ \
+static int gcm_decrypt_##suffix(struct aead_request *req) \
+{ \
+ return gcm_crypt(req, (flags)); \
+} \
+ \
+static int rfc4106_setkey_##suffix(struct crypto_aead *tfm, const u8 *raw_key, \
+ unsigned int keylen) \
+{ \
+ return gcm_setkey(tfm, raw_key, keylen, (flags) | FLAG_RFC4106); \
+} \
+ \
+static int rfc4106_encrypt_##suffix(struct aead_request *req) \
+{ \
+ return gcm_crypt(req, (flags) | FLAG_RFC4106 | FLAG_ENC); \
+} \
+ \
+static int rfc4106_decrypt_##suffix(struct aead_request *req) \
+{ \
+ return gcm_crypt(req, (flags) | FLAG_RFC4106); \
+} \
+ \
+static struct aead_alg aes_gcm_algs_##suffix[] = { { \
+ .setkey = gcm_setkey_##suffix, \
+ .setauthsize = generic_gcmaes_set_authsize, \
+ .encrypt = gcm_encrypt_##suffix, \
+ .decrypt = gcm_decrypt_##suffix, \
+ .ivsize = GCM_AES_IV_SIZE, \
+ .chunksize = AES_BLOCK_SIZE, \
+ .maxauthsize = 16, \
+ .base = { \
+ .cra_name = "__gcm(aes)", \
+ .cra_driver_name = "__" generic_driver_name, \
+ .cra_priority = (priority), \
+ .cra_flags = CRYPTO_ALG_INTERNAL, \
+ .cra_blocksize = 1, \
+ .cra_ctxsize = (ctxsize), \
+ .cra_module = THIS_MODULE, \
+ }, \
+}, { \
+ .setkey = rfc4106_setkey_##suffix, \
+ .setauthsize = common_rfc4106_set_authsize, \
+ .encrypt = rfc4106_encrypt_##suffix, \
+ .decrypt = rfc4106_decrypt_##suffix, \
+ .ivsize = GCM_RFC4106_IV_SIZE, \
+ .chunksize = AES_BLOCK_SIZE, \
+ .maxauthsize = 16, \
+ .base = { \
+ .cra_name = "__rfc4106(gcm(aes))", \
+ .cra_driver_name = "__" rfc_driver_name, \
+ .cra_priority = (priority), \
+ .cra_flags = CRYPTO_ALG_INTERNAL, \
+ .cra_blocksize = 1, \
+ .cra_ctxsize = (ctxsize), \
+ .cra_module = THIS_MODULE, \
+ }, \
+} }; \
+ \
+static struct simd_aead_alg *aes_gcm_simdalgs_##suffix[2] \
+
+/* aes_gcm_algs_vaes_avx10_256 */
+DEFINE_GCM_ALGS(vaes_avx10_256, 0,
+ "generic-gcm-vaes-avx10_256", "rfc4106-gcm-vaes-avx10_256",
+ AES_GCM_KEY_AVX10_SIZE, 700);
+
+/* aes_gcm_algs_vaes_avx10_512 */
+DEFINE_GCM_ALGS(vaes_avx10_512, FLAG_AVX10_512,
+ "generic-gcm-vaes-avx10_512", "rfc4106-gcm-vaes-avx10_512",
+ AES_GCM_KEY_AVX10_SIZE, 800);
+#endif /* CONFIG_AS_VAES && CONFIG_AS_VPCLMULQDQ */
/*
* This is a list of CPU models that are known to suffer from downclocking when
- * zmm registers (512-bit vectors) are used. On these CPUs, the AES-XTS
- * implementation with zmm registers won't be used by default. An
- * implementation with ymm registers (256-bit vectors) will be used instead.
+ * zmm registers (512-bit vectors) are used. On these CPUs, the AES mode
+ * implementations with zmm registers won't be used by default. Implementations
+ * with ymm registers (256-bit vectors) will be used by default instead.
*/
static const struct x86_cpu_id zmm_exclusion_list[] = {
X86_MATCH_VFM(INTEL_SKYLAKE_X, 0),
X86_MATCH_VFM(INTEL_ICELAKE_X, 0),
X86_MATCH_VFM(INTEL_ICELAKE_D, 0),
@@ -1234,11 +1728,11 @@ static const struct x86_cpu_id zmm_exclusion_list[] = {
/* Allow Rocket Lake and later, and Sapphire Rapids and later. */
/* Also allow AMD CPUs (starting with Zen 4, the first with AVX-512). */
{},
};
-static int __init register_xts_algs(void)
+static int __init register_avx_algs(void)
{
int err;
if (!boot_cpu_has(X86_FEATURE_AVX))
return 0;
@@ -1267,23 +1761,38 @@ static int __init register_xts_algs(void)
err = simd_register_skciphers_compat(&aes_xts_alg_vaes_avx10_256, 1,
&aes_xts_simdalg_vaes_avx10_256);
if (err)
return err;
+ err = simd_register_aeads_compat(aes_gcm_algs_vaes_avx10_256,
+ ARRAY_SIZE(aes_gcm_algs_vaes_avx10_256),
+ aes_gcm_simdalgs_vaes_avx10_256);
+ if (err)
+ return err;
+
+ if (x86_match_cpu(zmm_exclusion_list)) {
+ int i;
- if (x86_match_cpu(zmm_exclusion_list))
aes_xts_alg_vaes_avx10_512.base.cra_priority = 1;
+ for (i = 0; i < ARRAY_SIZE(aes_gcm_algs_vaes_avx10_512); i++)
+ aes_gcm_algs_vaes_avx10_512[i].base.cra_priority = 1;
+ }
err = simd_register_skciphers_compat(&aes_xts_alg_vaes_avx10_512, 1,
&aes_xts_simdalg_vaes_avx10_512);
if (err)
return err;
+ err = simd_register_aeads_compat(aes_gcm_algs_vaes_avx10_512,
+ ARRAY_SIZE(aes_gcm_algs_vaes_avx10_512),
+ aes_gcm_simdalgs_vaes_avx10_512);
+ if (err)
+ return err;
#endif /* CONFIG_AS_VAES && CONFIG_AS_VPCLMULQDQ */
return 0;
}
-static void unregister_xts_algs(void)
+static void unregister_avx_algs(void)
{
if (aes_xts_simdalg_aesni_avx)
simd_unregister_skciphers(&aes_xts_alg_aesni_avx, 1,
&aes_xts_simdalg_aesni_avx);
#if defined(CONFIG_AS_VAES) && defined(CONFIG_AS_VPCLMULQDQ)
@@ -1291,22 +1800,30 @@ static void unregister_xts_algs(void)
simd_unregister_skciphers(&aes_xts_alg_vaes_avx2, 1,
&aes_xts_simdalg_vaes_avx2);
if (aes_xts_simdalg_vaes_avx10_256)
simd_unregister_skciphers(&aes_xts_alg_vaes_avx10_256, 1,
&aes_xts_simdalg_vaes_avx10_256);
+ if (aes_gcm_simdalgs_vaes_avx10_256[0])
+ simd_unregister_aeads(aes_gcm_algs_vaes_avx10_256,
+ ARRAY_SIZE(aes_gcm_algs_vaes_avx10_256),
+ aes_gcm_simdalgs_vaes_avx10_256);
if (aes_xts_simdalg_vaes_avx10_512)
simd_unregister_skciphers(&aes_xts_alg_vaes_avx10_512, 1,
&aes_xts_simdalg_vaes_avx10_512);
+ if (aes_gcm_simdalgs_vaes_avx10_512[0])
+ simd_unregister_aeads(aes_gcm_algs_vaes_avx10_512,
+ ARRAY_SIZE(aes_gcm_algs_vaes_avx10_512),
+ aes_gcm_simdalgs_vaes_avx10_512);
#endif
}
#else /* CONFIG_X86_64 */
-static int __init register_xts_algs(void)
+static int __init register_avx_algs(void)
{
return 0;
}
-static void unregister_xts_algs(void)
+static void unregister_avx_algs(void)
{
}
#endif /* !CONFIG_X86_64 */
#ifdef CONFIG_X86_64
@@ -1445,18 +1962,18 @@ static int __init aesni_init(void)
&aesni_simd_xctr);
if (err)
goto unregister_aeads;
#endif /* CONFIG_X86_64 */
- err = register_xts_algs();
+ err = register_avx_algs();
if (err)
- goto unregister_xts;
+ goto unregister_avx;
return 0;
-unregister_xts:
- unregister_xts_algs();
+unregister_avx:
+ unregister_avx_algs();
#ifdef CONFIG_X86_64
if (aesni_simd_xctr)
simd_unregister_skciphers(&aesni_xctr, 1, &aesni_simd_xctr);
unregister_aeads:
#endif /* CONFIG_X86_64 */
@@ -1480,11 +1997,11 @@ static void __exit aesni_exit(void)
crypto_unregister_alg(&aesni_cipher_alg);
#ifdef CONFIG_X86_64
if (boot_cpu_has(X86_FEATURE_AVX))
simd_unregister_skciphers(&aesni_xctr, 1, &aesni_simd_xctr);
#endif /* CONFIG_X86_64 */
- unregister_xts_algs();
+ unregister_avx_algs();
}
late_initcall(aesni_init);
module_exit(aesni_exit);
--
2.45.1
Powered by blists - more mailing lists