| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <70d3c0af-8bf6-2e33-074d-5b1719a5674f@linux.intel.com>
Date: Mon, 27 May 2024 14:39:02 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Shravan Kumar Ramani <shravankr@...dia.com>
cc: Hans de Goede <hdegoede@...hat.com>, Vadim Pasternak <vadimp@...dia.com>,
David Thompson <davthompson@...dia.com>,
platform-driver-x86@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/4] platform/mellanox: mlxbf-pmc: Add support for
64-bit counters and cycle count
On Mon, 20 May 2024, Shravan Kumar Ramani wrote:
> Add support for programming any counter to monitor the cycle count.
> Since counting of cycles using 32-bit ocunters would result in frequent
counters
> wraparounds, add the ability to combine 2 adjacent 32-bit counters to
> form 1 64-bit counter.
> Both these features are supported by BlueField-3 PMC hardware, hence
> the required bit-fields are exposed by the driver via sysfs to allow
> the user to configure as needed.
I'm trying to understand what happens for the other counter, when the
use_odd_counter is enabled? This change also doesn't add code that would
make the other counter -EBUSY, should that be done?
For 64-bit counter, I suppose the userspace is expected to read the full
counter from two sysfs files and combine the value (your documentation
doesn't explain this)? That seems non-optimal, why cannot kernel just
return the full combined 64-value directly in kernel?
Similarly, are these cycle counters occupying the same space as non-cycle
counters (so both can/cannot be used that the same time)? I'm asking this
because you're adding a parallel interface to read the value and if it's
either-or, I don't understand why the value needs to be read from
different file depending on the counter counting in cycles or not.
--
i.
> Signed-off-by: Shravan Kumar Ramani <shravankr@...dia.com>
> Reviewed-by: David Thompson <davthompson@...dia.com>
> Reviewed-by: Vadim Pasternak <vadimp@...dia.com>
> ---
> drivers/platform/mellanox/mlxbf-pmc.c | 134 ++++++++++++++++++++++++++
> 1 file changed, 134 insertions(+)
>
> diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c
> index 4ed9c7fd2b62..635ecc3b3845 100644
> --- a/drivers/platform/mellanox/mlxbf-pmc.c
> +++ b/drivers/platform/mellanox/mlxbf-pmc.c
> @@ -88,6 +88,8 @@
> #define MLXBF_PMC_CRSPACE_PERFMON_CTL(n) (n * MLXBF_PMC_CRSPACE_PERFMON_REG0_SZ)
> #define MLXBF_PMC_CRSPACE_PERFMON_EN BIT(30)
> #define MLXBF_PMC_CRSPACE_PERFMON_CLR BIT(28)
> +#define MLXBF_PMC_CRSPACE_PERFMON_UOC GENMASK(15, 0)
> +#define MLXBF_PMC_CRSPACE_PERFMON_COUNT_CLOCK(n) (MLXBF_PMC_CRSPACE_PERFMON_CTL(n) + 0x4)
> #define MLXBF_PMC_CRSPACE_PERFMON_VAL0(n) (MLXBF_PMC_CRSPACE_PERFMON_CTL(n) + 0xc)
>
> /**
> @@ -114,6 +116,8 @@ struct mlxbf_pmc_attribute {
> * @attr_event: Attributes for "event" sysfs files
> * @attr_event_list: Attributes for "event_list" sysfs files
> * @attr_enable: Attributes for "enable" sysfs files
> + * @attr_use_odd_counter: Attributes for "use_odd_counter" sysfs files
> + * @attr_count_clock: Attributes for "count_clock" sysfs files
> * @block_attr: All attributes needed for the block
> * @block_attr_grp: Attribute group for the block
> */
> @@ -126,6 +130,8 @@ struct mlxbf_pmc_block_info {
> struct mlxbf_pmc_attribute *attr_event;
> struct mlxbf_pmc_attribute attr_event_list;
> struct mlxbf_pmc_attribute attr_enable;
> + struct mlxbf_pmc_attribute attr_use_odd_counter;
> + struct mlxbf_pmc_attribute attr_count_clock;
> struct attribute *block_attr[MLXBF_PMC_MAX_ATTRS];
> struct attribute_group block_attr_grp;
> };
> @@ -1763,6 +1769,103 @@ static ssize_t mlxbf_pmc_enable_store(struct device *dev,
> return count;
> }
>
> +/* Show function for "use_odd_counter" sysfs files - only for crspace */
> +static ssize_t mlxbf_pmc_use_odd_counter_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct mlxbf_pmc_attribute *attr_use_odd_counter = container_of(
> + attr, struct mlxbf_pmc_attribute, dev_attr);
> + unsigned int blk_num;
> + u32 value, reg;
> +
> + blk_num = attr_use_odd_counter->nr;
> +
> + if (mlxbf_pmc_readl(pmc->block[blk_num].mmio_base +
> + MLXBF_PMC_CRSPACE_PERFMON_CTL(pmc->block[blk_num].counters),
> + ®))
> + return -EINVAL;
> +
> + value = FIELD_GET(MLXBF_PMC_CRSPACE_PERFMON_UOC, reg);
> +
> + return sysfs_emit(buf, "%u\n", value);
> +}
> +
> +/* Store function for "use_odd_counter" sysfs files - only for crspace */
> +static ssize_t mlxbf_pmc_use_odd_counter_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct mlxbf_pmc_attribute *attr_use_odd_counter = container_of(
> + attr, struct mlxbf_pmc_attribute, dev_attr);
> + unsigned int blk_num;
> + u32 uoc, reg;
> + int err;
> +
> + blk_num = attr_use_odd_counter->nr;
> +
> + err = kstrtouint(buf, 0, &uoc);
> + if (err < 0)
> + return err;
> +
> + err = mlxbf_pmc_readl(pmc->block[blk_num].mmio_base +
> + MLXBF_PMC_CRSPACE_PERFMON_CTL(pmc->block[blk_num].counters),
> + ®);
> + if (err)
> + return -EINVAL;
> +
> + reg &= ~MLXBF_PMC_CRSPACE_PERFMON_UOC;
> + reg |= FIELD_PREP(MLXBF_PMC_CRSPACE_PERFMON_UOC, uoc);
> +
> + mlxbf_pmc_write(pmc->block[blk_num].mmio_base +
> + MLXBF_PMC_CRSPACE_PERFMON_CTL(pmc->block[blk_num].counters),
> + MLXBF_PMC_WRITE_REG_32, reg);
> +
> + return count;
> +}
> +
> +/* Show function for "count_clock" sysfs files - only for crspace */
> +static ssize_t mlxbf_pmc_count_clock_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct mlxbf_pmc_attribute *attr_count_clock = container_of(
> + attr, struct mlxbf_pmc_attribute, dev_attr);
> + unsigned int blk_num;
> + u32 reg;
> +
> + blk_num = attr_count_clock->nr;
> +
> + if (mlxbf_pmc_readl(pmc->block[blk_num].mmio_base +
> + MLXBF_PMC_CRSPACE_PERFMON_COUNT_CLOCK(pmc->block[blk_num].counters),
> + ®))
> + return -EINVAL;
> +
> + return sysfs_emit(buf, "%u\n", reg);
> +}
> +
> +/* Store function for "count_clock" sysfs files - only for crspace */
> +static ssize_t mlxbf_pmc_count_clock_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct mlxbf_pmc_attribute *attr_count_clock = container_of(
> + attr, struct mlxbf_pmc_attribute, dev_attr);
> + unsigned int blk_num;
> + u32 reg;
> + int err;
> +
> + blk_num = attr_count_clock->nr;
> +
> + err = kstrtouint(buf, 0, ®);
> + if (err < 0)
> + return err;
> +
> + mlxbf_pmc_write(pmc->block[blk_num].mmio_base +
> + MLXBF_PMC_CRSPACE_PERFMON_COUNT_CLOCK(pmc->block[blk_num].counters),
> + MLXBF_PMC_WRITE_REG_32, reg);
> +
> + return count;
> +}
> +
> /* Populate attributes for blocks with counters to monitor performance */
> static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_num)
> {
> @@ -1799,6 +1902,37 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_
> attr = NULL;
> }
>
> + if (pmc->block[blk_num].type == MLXBF_PMC_TYPE_CRSPACE) {
> + /*
> + * Couple adjacent odd and even 32-bit counters to form 64-bit counters
> + * using "use_odd_counter" sysfs which has one bit per even counter.
> + */
> + attr = &pmc->block[blk_num].attr_use_odd_counter;
> + attr->dev_attr.attr.mode = 0644;
> + attr->dev_attr.show = mlxbf_pmc_use_odd_counter_show;
> + attr->dev_attr.store = mlxbf_pmc_use_odd_counter_store;
> + attr->nr = blk_num;
> + attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
> + "use_odd_counter");
> + if (!attr->dev_attr.attr.name)
> + return -ENOMEM;
> + pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
> + attr = NULL;
> +
> + /* Program crspace counters to count clock cycles using "count_clock" sysfs */
> + attr = &pmc->block[blk_num].attr_count_clock;
> + attr->dev_attr.attr.mode = 0644;
> + attr->dev_attr.show = mlxbf_pmc_count_clock_show;
> + attr->dev_attr.store = mlxbf_pmc_count_clock_store;
> + attr->nr = blk_num;
> + attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
> + "count_clock");
> + if (!attr->dev_attr.attr.name)
> + return -ENOMEM;
> + pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
> + attr = NULL;
> + }
Powered by blists - more mailing lists