[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240528150339.6791-5-paul.barker.ct@bp.renesas.com>
Date: Tue, 28 May 2024 16:03:36 +0100
From: Paul Barker <paul.barker.ct@...renesas.com>
To: Sergey Shtylyov <s.shtylyov@....ru>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
Cc: Paul Barker <paul.barker.ct@...renesas.com>,
Biju Das <biju.das.jz@...renesas.com>,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
netdev@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [net-next PATCH v4 4/7] net: ravb: Refactor GbEth RX code path
We can reduce code duplication in ravb_rx_gbeth().
Signed-off-by: Paul Barker <paul.barker.ct@...renesas.com>
---
Changes v3->v4:
* Used switch statements instead of if statements in ravb_rx_gbeth().
drivers/net/ethernet/renesas/ravb_main.c | 73 +++++++++++++-----------
1 file changed, 40 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 7df7d2e93a3a..c9c5cc641589 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -817,47 +817,54 @@ static int ravb_rx_gbeth(struct net_device *ndev, int budget, int q)
stats->rx_missed_errors++;
} else {
die_dt = desc->die_dt & 0xF0;
+ skb = ravb_get_skb_gbeth(ndev, entry, desc);
switch (die_dt) {
case DT_FSINGLE:
- skb = ravb_get_skb_gbeth(ndev, entry, desc);
+ case DT_FSTART:
+ /* Start of packet:
+ * Set initial data length.
+ */
skb_put(skb, desc_len);
+
+ /* Save this SKB if the packet spans multiple
+ * descriptors.
+ */
+ if (die_dt == DT_FSTART)
+ priv->rx_1st_skb = skb;
+ break;
+
+ case DT_FMID:
+ case DT_FEND:
+ /* Continuing a packet:
+ * Move data into the saved SKB.
+ */
+ skb_copy_to_linear_data_offset(priv->rx_1st_skb,
+ priv->rx_1st_skb->len,
+ skb->data,
+ desc_len);
+ skb_put(priv->rx_1st_skb, desc_len);
+ dev_kfree_skb(skb);
+
+ /* Set skb to point at the whole packet so that
+ * we only need one code path for finishing a
+ * packet.
+ */
+ skb = priv->rx_1st_skb;
+ }
+
+ switch (die_dt) {
+ case DT_FSINGLE:
+ case DT_FEND:
+ /* Finishing a packet:
+ * Determine protocol & checksum, hand off to
+ * NAPI and update our stats.
+ */
skb->protocol = eth_type_trans(skb, ndev);
if (ndev->features & NETIF_F_RXCSUM)
ravb_rx_csum_gbeth(skb);
+ stats->rx_bytes += skb->len;
napi_gro_receive(&priv->napi[q], skb);
rx_packets++;
- stats->rx_bytes += desc_len;
- break;
- case DT_FSTART:
- priv->rx_1st_skb = ravb_get_skb_gbeth(ndev, entry, desc);
- skb_put(priv->rx_1st_skb, desc_len);
- break;
- case DT_FMID:
- skb = ravb_get_skb_gbeth(ndev, entry, desc);
- skb_copy_to_linear_data_offset(priv->rx_1st_skb,
- priv->rx_1st_skb->len,
- skb->data,
- desc_len);
- skb_put(priv->rx_1st_skb, desc_len);
- dev_kfree_skb(skb);
- break;
- case DT_FEND:
- skb = ravb_get_skb_gbeth(ndev, entry, desc);
- skb_copy_to_linear_data_offset(priv->rx_1st_skb,
- priv->rx_1st_skb->len,
- skb->data,
- desc_len);
- skb_put(priv->rx_1st_skb, desc_len);
- dev_kfree_skb(skb);
- priv->rx_1st_skb->protocol =
- eth_type_trans(priv->rx_1st_skb, ndev);
- if (ndev->features & NETIF_F_RXCSUM)
- ravb_rx_csum_gbeth(priv->rx_1st_skb);
- stats->rx_bytes += priv->rx_1st_skb->len;
- napi_gro_receive(&priv->napi[q],
- priv->rx_1st_skb);
- rx_packets++;
- break;
}
}
}
--
2.39.2
Powered by blists - more mailing lists