lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1716932145-3486-1-git-send-email-Tristram.Ha@microchip.com>
Date: Tue, 28 May 2024 14:35:45 -0700
From: <Tristram.Ha@...rochip.com>
To: Woojung Huh <woojung.huh@...rochip.com>, Andrew Lunn <andrew@...n.ch>,
	Vivien Didelot <vivien.didelot@...il.com>, Florian Fainelli
	<f.fainelli@...il.com>, Vladimir Oltean <olteanv@...il.com>
CC: "David S. Miller" <davem@...emloft.net>, Eric Dumazet
	<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
	<pabeni@...hat.com>, <UNGLinuxDriver@...rochip.com>,
	<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>, Tristram Ha
	<tristram.ha@...rochip.com>
Subject: [PATCH net] net: dsa: microchip: fix initial port flush problem

From: Tristram Ha <tristram.ha@...rochip.com>

The very first flush in any port will flush all learned addresses in all
ports.  This can be observed by unplugging a cable from one port while
additional ports are connected and dumping the fdb entries.

This problem is caused by the initially wrong value programmed to the
register.  After the first flush the value is reset back to the normal so
the next port flush will not cause such problem again.

Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <tristram.ha@...rochip.com>
---
 drivers/net/dsa/microchip/ksz9477.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index f8ad7833f5d9..7cc92b90ffea 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -356,8 +356,7 @@ int ksz9477_reset_switch(struct ksz_device *dev)
 
 	/* default configuration */
 	ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
-	data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
-	      SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
+	data8 |= SW_AGING_ENABLE | SW_LINK_AUTO_AGING | SW_SRC_ADDR_FILTER;
 	ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
 
 	/* disable interrupts */
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ