| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240529162958.18081-12-johan+linaro@kernel.org>
Date: Wed, 29 May 2024 18:29:55 +0200
From: Johan Hovold <johan+linaro@...nel.org>
To: Lee Jones <lee@...nel.org>,
Mark Brown <broonie@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bjorn Andersson <andersson@...nel.org>
Cc: Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Das Srinagesh <quic_gurus@...cinc.com>,
Satya Priya Kakitapalli <quic_skakitap@...cinc.com>,
Stephen Boyd <swboyd@...omium.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Andy Shevchenko <andy.shevchenko@...il.com>,
linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org,
Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH v2 11/14] dt-bindings: mfd: pm8008: rework binding
Rework the pm8008 binding by dropping internal details like register
offsets and interrupts and by adding the missing regulator and
temperature alarm properties.
Note that child nodes are still used for pinctrl and regulator
configuration.
Also note that the pinctrl state definition will be extended later and
could eventually also be shared with other PMICs (e.g. by breaking out
bits of qcom,pmic-gpio.yaml).
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
.../devicetree/bindings/mfd/qcom,pm8008.yaml | 149 +++++++++++-------
1 file changed, 90 insertions(+), 59 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index d71657f488db..ccf472e7f552 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -27,103 +27,134 @@ properties:
reset-gpios:
maxItems: 1
- "#interrupt-cells":
+ vdd-l1-l2-supply: true
+ vdd-l3-l4-supply: true
+ vdd-l5-supply: true
+ vdd-l6-supply: true
+ vdd-l7-supply: true
+
+ gpio-controller: true
+
+ "#gpio-cells":
const: 2
- description: |
- The first cell is the IRQ number, the second cell is the IRQ trigger
- flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
+ gpio-ranges:
+ maxItems: 1
interrupt-controller: true
- "#address-cells":
- const: 1
+ "#interrupt-cells":
+ const: 2
- "#size-cells":
+ "#thermal-sensor-cells":
const: 0
-patternProperties:
- "^gpio@[0-9a-f]+$":
+ pinctrl:
type: object
+ additionalProperties: false
+ patternProperties:
+ "-state$":
+ type: object
+ $ref: "#/$defs/qcom-pm8008-pinctrl-state"
+ unevaluatedProperties: false
- description: |
- The GPIO peripheral. This node may be specified twice, one for each GPIO.
-
- properties:
- compatible:
- items:
- - const: qcom,pm8008-gpio
- - const: qcom,spmi-gpio
+ regulators:
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^ldo[1-7]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
- reg:
- description: Peripheral address of one of the two GPIO peripherals.
- maxItems: 1
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vdd-l1-l2-supply
+ - vdd-l3-l4-supply
+ - vdd-l5-supply
+ - vdd-l6-supply
+ - vdd-l7-supply
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+ - interrupt-controller
+ - "#interrupt-cells"
+ - "#thermal-sensor-cells"
- gpio-controller: true
+additionalProperties: false
- gpio-ranges:
- maxItems: 1
+$defs:
+ qcom-pm8008-pinctrl-state:
+ type: object
- interrupt-controller: true
+ allOf:
+ - $ref: /schemas/pinctrl/pinmux-node.yaml
+ - $ref: /schemas/pinctrl/pincfg-node.yaml
- "#interrupt-cells":
- const: 2
+ properties:
+ pins:
+ items:
+ pattern: "^gpio[12]$"
- "#gpio-cells":
- const: 2
+ function:
+ items:
+ - enum:
+ - normal
required:
- - compatible
- - reg
- - gpio-controller
- - interrupt-controller
- - "#gpio-cells"
- - gpio-ranges
- - "#interrupt-cells"
+ - pins
+ - function
additionalProperties: false
-required:
- - compatible
- - reg
- - interrupts
- - "#address-cells"
- - "#size-cells"
- - "#interrupt-cells"
-
-additionalProperties: false
-
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/mfd/qcom-pm8008.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
- pmic@8 {
+ pm8008: pmic@8 {
compatible = "qcom,pm8008";
reg = <0x8>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
interrupt-parent = <&tlmm>;
interrupts = <32 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
- pm8008_gpios: gpio@...0 {
- compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pm8008_gpios 0 0 2>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ vdd-l1-l2-supply = <&vreg_s8b_1p2>;
+ vdd-l3-l4-supply = <&vreg_s1b_1p8>;
+ vdd-l5-supply = <&vreg_bob>;
+ vdd-l6-supply = <&vreg_bob>;
+ vdd-l7-supply = <&vreg_bob>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8008 0 0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #thermal-sensor-cells = <0>;
+
+ pinctrl {
+ gpio-keys-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+ };
+
+ regulators {
+ ldo1 {
+ regulator-name = "vreg_l1";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ };
};
};
};
--
2.44.1
Powered by blists - more mailing lists