[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <71452f6882efe6a181d477914488617d28a38e2f.camel@gmail.com>
Date: Wed, 29 May 2024 14:27:46 +0200
From: Nuno Sá <noname.nuno@...il.com>
To: dumitru.ceclan@...log.com
Cc: Lars-Peter Clausen <lars@...afoo.de>, Michael Hennerich
<Michael.Hennerich@...log.com>, Jonathan Cameron <jic23@...nel.org>, Rob
Herring <robh@...nel.org>, Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
David Lechner <dlechner@...libre.com>, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, Dumitru Ceclan
<mitrutzceclan@...il.com>
Subject: Re: [PATCH v3 3/6] iio: adc: ad7173: refactor ain and vref selection
On Mon, 2024-05-27 at 20:02 +0300, Dumitru Ceclan via B4 Relay wrote:
> From: Dumitru Ceclan <dumitru.ceclan@...log.com>
>
> Move validation of analog inputs and reference voltage selection to
> separate functions to reduce the size of the channel config parsing
> function and improve readability.
>
> Reviewed-by: David Lechner <dlechner@...libre.com>
> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@...log.com>
> ---
> drivers/iio/adc/ad7173.c | 62 ++++++++++++++++++++++++++++++++++--------------
> 1 file changed, 44 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c
> index 9e507e2c66f0..8a53821c8e58 100644
> --- a/drivers/iio/adc/ad7173.c
> +++ b/drivers/iio/adc/ad7173.c
> @@ -906,6 +906,44 @@ static int ad7173_register_clk_provider(struct iio_dev
> *indio_dev)
> &st->int_clk_hw);
> }
>
> +static int ad7173_validate_voltage_ain_inputs(struct ad7173_state *st,
> + unsigned int ain[2])
> +{
> + struct device *dev = &st->sd.spi->dev;
> +
> + for (int i = 0; i < 2; i++) {
> + if (ain[i] < st->info->num_inputs)
> + continue;
> +
> + return dev_err_probe(dev, -EINVAL,
> + "Input pin number out of range for pair (%d %d).\n",
> + ain[0], ain[1]);
> + }
> +
> + return 0;
> +}
> +
> +static int ad7173_validate_reference(struct ad7173_state *st, int ref_sel)
> +{
> + struct device *dev = &st->sd.spi->dev;
> + int ret;
> +
> + if (ref_sel == AD7173_SETUP_REF_SEL_INT_REF && !st->info->has_int_ref)
> + return dev_err_probe(dev, -EINVAL,
> + "Internal reference is not available on current
> model.\n");
> +
> + if (ref_sel == AD7173_SETUP_REF_SEL_EXT_REF2 && !st->info->has_ref2)
> + return dev_err_probe(dev, -EINVAL,
> + "External reference 2 is not available on current
> model.\n");
> +
> + ret = ad7173_get_ref_voltage_milli(st, ref_sel);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Cannot use reference %u\n",
> + ref_sel);
> +
> + return 0;
If you need a v4, I would just 'return ad7173_get_ref_voltage_milli(...)'. Any error
log needed should be done inside ad7173_get_ref_voltage_milli(). Anyways:
Reviewed-by: Nuno Sa <nuno.sa@...log.com>
- Nuno Sá
Powered by blists - more mailing lists