[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240530231608.3557782-1-chris.packham@alliedtelesis.co.nz>
Date: Fri, 31 May 2024 11:16:08 +1200
From: Chris Packham <chris.packham@...iedtelesis.co.nz>
To: andrew@...n.ch,
gregory.clement@...tlin.com,
sebastian.hesselbarth@...il.com
Cc: linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Chris Packham <chris.packham@...iedtelesis.co.nz>
Subject: [PATCH] ARM: dts: marvell: Add 7-segment LED display on x530
The Allied Telesis x530 products have a 7-segment LED display which is
used for node identification when the devices are stacked. Represent
this as a gpio-7-segment device.
Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
---
This was originally sent as part of the series that added the seg-led-gpio
driver but wasn't applied with those changes. At the time I said I'd submit
this separately but I forgot about it until now.
arch/arm/boot/dts/marvell/armada-385-atl-x530.dts | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
index 5a9ab8410b7b..2fb7304039be 100644
--- a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
@@ -43,6 +43,17 @@ uart0: serial@...00 {
};
};
};
+
+ led-7seg {
+ compatible = "gpio-7-segment";
+ segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>,
+ <&led_7seg_gpio 1 GPIO_ACTIVE_LOW>,
+ <&led_7seg_gpio 2 GPIO_ACTIVE_LOW>,
+ <&led_7seg_gpio 3 GPIO_ACTIVE_LOW>,
+ <&led_7seg_gpio 4 GPIO_ACTIVE_LOW>,
+ <&led_7seg_gpio 5 GPIO_ACTIVE_LOW>,
+ <&led_7seg_gpio 6 GPIO_ACTIVE_LOW>;
+ };
};
&pciec {
@@ -149,7 +160,7 @@ i2c@3 {
#size-cells = <0>;
reg = <3>;
- gpio@20 {
+ led_7seg_gpio: gpio@20 {
compatible = "nxp,pca9554";
gpio-controller;
#gpio-cells = <2>;
--
2.45.1
Powered by blists - more mailing lists