lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240530092930.434026-2-j-choudhary@ti.com>
Date: Thu, 30 May 2024 14:59:29 +0530
From: Jayesh Choudhary <j-choudhary@...com>
To: <linux-kernel@...r.kernel.org>, <dmitry.baryshkov@...aro.org>,
        <andrzej.hajda@...el.com>, <neil.armstrong@...aro.org>,
        <rfoss@...nel.org>, <Laurent.pinchart@...asonboard.com>,
        <mripard@...nel.org>, <sam@...nborg.org>, <j-choudhary@...com>
CC: <jonas@...boo.se>, <jernej.skrabec@...il.com>,
        <maarten.lankhorst@...ux.intel.com>, <tzimmermann@...e.de>,
        <airlied@...il.com>, <daniel@...ll.ch>, <a-bhatia1@...com>,
        <dri-devel@...ts.freedesktop.org>
Subject: [PATCH v4 1/2] drm/bridge: sii902x: Fix mode_valid hook

Currently, mode_valid hook returns all mode as valid and it is
defined only in drm_connector_helper_funcs. With the introduction of
'DRM_BRIDGE_ATTACH_NO_CONNECTOR', connector is not initialized in
bridge_attach call for cases when the encoder has this flag enabled.
So move the mode_valid hook to drm_bridge_funcs with proper clock
checks for maximum and minimum pixel clock supported by the bridge.

Signed-off-by: Jayesh Choudhary <j-choudhary@...com>
---
 drivers/gpu/drm/bridge/sii902x.c | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 2fbeda9025bf..6a6055a4ccf9 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -163,6 +163,14 @@
 
 #define SII902X_AUDIO_PORT_INDEX		3
 
+/*
+ * The maximum resolution supported by the HDMI bridge is 1080p@...z
+ * and 1920x1200 requiring a pixel clock of 165MHz and the minimum
+ * resolution supported is 480p@...z requiring a pixel clock of 25MHz
+ */
+#define SII902X_MIN_PIXEL_CLOCK_KHZ		25000
+#define SII902X_MAX_PIXEL_CLOCK_KHZ		165000
+
 struct sii902x {
 	struct i2c_client *i2c;
 	struct regmap *regmap;
@@ -310,17 +318,8 @@ static int sii902x_get_modes(struct drm_connector *connector)
 	return num;
 }
 
-static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
-					       struct drm_display_mode *mode)
-{
-	/* TODO: check mode */
-
-	return MODE_OK;
-}
-
 static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
 	.get_modes = sii902x_get_modes,
-	.mode_valid = sii902x_mode_valid,
 };
 
 static void sii902x_bridge_disable(struct drm_bridge *bridge)
@@ -504,6 +503,20 @@ static int sii902x_bridge_atomic_check(struct drm_bridge *bridge,
 	return 0;
 }
 
+static enum drm_mode_status
+sii902x_bridge_mode_valid(struct drm_bridge *bridge,
+			  const struct drm_display_info *info,
+			  const struct drm_display_mode *mode)
+{
+	if (mode->clock < SII902X_MIN_PIXEL_CLOCK_KHZ)
+		return MODE_CLOCK_LOW;
+
+	if (mode->clock > SII902X_MAX_PIXEL_CLOCK_KHZ)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
 static const struct drm_bridge_funcs sii902x_bridge_funcs = {
 	.attach = sii902x_bridge_attach,
 	.mode_set = sii902x_bridge_mode_set,
@@ -516,6 +529,7 @@ static const struct drm_bridge_funcs sii902x_bridge_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
 	.atomic_get_input_bus_fmts = sii902x_bridge_atomic_get_input_bus_fmts,
 	.atomic_check = sii902x_bridge_atomic_check,
+	.mode_valid = sii902x_bridge_mode_valid,
 };
 
 static int sii902x_mute(struct sii902x *sii902x, bool mute)
-- 
2.25.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ