linux-kernel - Re: [PATCH V5 6/6] PCI: qcom: Add support for IPQ9574

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Thu, 30 May 2024 20:17:49 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: devi priya <quic_devipriy@...cinc.com>
Cc: bhelgaas@...gle.com, lpieralisi@...nel.org, kw@...ux.com,
	robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
	andersson@...nel.org, konrad.dybcio@...aro.org,
	mturquette@...libre.com, sboyd@...nel.org,
	manivannan.sadhasivam@...aro.org, linux-arm-msm@...r.kernel.org,
	linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Subject: Re: [PATCH V5 6/6] PCI: qcom: Add support for IPQ9574

On Sun, May 12, 2024 at 01:58:58PM +0530, devi priya wrote:
> The IPQ9574 platform has 4 Gen3 PCIe controllers:
> two single-lane and two dual-lane based on SNPS core 5.70a
> 
> The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a
> Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0'
> which reuses all the members of 'ops_2_9_0' except for the post_init
> as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0
> and 1_27_0.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> Reviewed-by: Manivannan Sadhasivam <mani@...nel.org>
> Co-developed-by: Anusha Rao <quic_anusha@...cinc.com>
> Signed-off-by: Anusha Rao <quic_anusha@...cinc.com>
> Signed-off-by: devi priya <quic_devipriy@...cinc.com>
> ---
>  Changes in V5:
> 	- Rebased on top of the below series which adds support for fetching
> 	  clocks from the device tree
> 	  https://lore.kernel.org/linux-pci/20240417-pci-qcom-clk-bulk-v1-1-52ca19b3d6b2@linaro.org/
> 
>  drivers/pci/controller/dwc/pcie-qcom.c | 36 +++++++++++++++++++++++---
>  1 file changed, 32 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 3d2eeff9a876..af36a29c092e 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -106,6 +106,7 @@
>  
>  /* PARF_SLV_ADDR_SPACE_SIZE register value */
>  #define SLV_ADDR_SPACE_SZ			0x10000000
> +#define SLV_ADDR_SPACE_SZ_1_27_0		0x08000000

Can you please explain what this value corresponds to? Even though there is an
old value, I didn't get much info earlier on what it is.

- Mani

>  
>  /* PARF_MHI_CLOCK_RESET_CTRL register fields */
>  #define AHB_CLK_EN				BIT(0)
> @@ -1095,16 +1096,13 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie)
>  	return clk_bulk_prepare_enable(res->num_clks, res->clks);
>  }
>  
> -static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
> +static int qcom_pcie_post_init(struct qcom_pcie *pcie)
>  {
>  	struct dw_pcie *pci = pcie->pci;
>  	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>  	u32 val;
>  	int i;
>  
> -	writel(SLV_ADDR_SPACE_SZ,
> -		pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
> -
>  	val = readl(pcie->parf + PARF_PHY_CTRL);
>  	val &= ~PHY_TEST_PWR_DOWN;
>  	writel(val, pcie->parf + PARF_PHY_CTRL);
> @@ -1144,6 +1142,22 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
>  	return 0;
>  }
>  
> +static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie)
> +{
> +	writel(SLV_ADDR_SPACE_SZ_1_27_0,
> +	       pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
> +
> +	return qcom_pcie_post_init(pcie);
> +}
> +
> +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
> +{
> +	writel(SLV_ADDR_SPACE_SZ,
> +	       pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
> +
> +	return qcom_pcie_post_init(pcie);
> +}
> +
>  static int qcom_pcie_link_up(struct dw_pcie *pci)
>  {
>  	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> @@ -1297,6 +1311,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
>  	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>  };
>  
> +/* Qcom IP rev.: 1.27.0  Synopsys IP rev.: 5.80a */
> +static const struct qcom_pcie_ops ops_1_27_0 = {
> +	.get_resources = qcom_pcie_get_resources_2_9_0,
> +	.init = qcom_pcie_init_2_9_0,
> +	.post_init = qcom_pcie_post_init_1_27_0,
> +	.deinit = qcom_pcie_deinit_2_9_0,
> +	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> +};
> +
>  static const struct qcom_pcie_cfg cfg_1_0_0 = {
>  	.ops = &ops_1_0_0,
>  };
> @@ -1334,6 +1357,10 @@ static const struct qcom_pcie_cfg cfg_sc8280xp = {
>  	.no_l0s = true,
>  };
>  
> +static const struct qcom_pcie_cfg cfg_1_27_0 = {
> +	.ops = &ops_1_27_0,
> +};
> +
>  static const struct dw_pcie_ops dw_pcie_ops = {
>  	.link_up = qcom_pcie_link_up,
>  	.start_link = qcom_pcie_start_link,
> @@ -1603,6 +1630,7 @@ static const struct of_device_id qcom_pcie_match[] = {
>  	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
>  	{ .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },
>  	{ .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
> +	{ .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 },
>  	{ .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 },
>  	{ .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 },
>  	{ .compatible = "qcom,pcie-sa8540p", .data = &cfg_sc8280xp },
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்