[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240530165335.GB11438@thinkpad>
Date: Thu, 30 May 2024 22:23:35 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: Abel Vesa <abel.vesa@...aro.org>
Cc: Bjorn Andersson <andersson@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rajendra Nayak <quic_rjendra@...cinc.com>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Sibi Sankar <quic_sibis@...cinc.com>, linux-arm-msm@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] clk: qcom: gcc-x1e80100: Fix halt_check for all 3 USB
PHY pipe clocks
On Thu, May 30, 2024 at 07:48:44PM +0300, Abel Vesa wrote:
> Since the pipe clocks are fed by the QMP PHYs, they are not under the
> GCC control, therefore the halt bit might not get. This will lead to
> the clock driver reporting the clock as stuck, but that is inaccurate.
> So instead of waiting for the halt bit to get set, just use the
> HALT_DELAY flag.
>
Isn't this behavior applicable to PCIe pipe clocks also?
- Mani
> Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
> Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
> ---
> drivers/clk/qcom/gcc-x1e80100.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-x1e80100.c b/drivers/clk/qcom/gcc-x1e80100.c
> index 1404017be918..afff7cd14848 100644
> --- a/drivers/clk/qcom/gcc-x1e80100.c
> +++ b/drivers/clk/qcom/gcc-x1e80100.c
> @@ -5186,7 +5186,7 @@ static struct clk_regmap_mux gcc_usb3_prim_phy_pipe_clk_src = {
>
> static struct clk_branch gcc_usb3_prim_phy_pipe_clk = {
> .halt_reg = 0x39068,
> - .halt_check = BRANCH_HALT_VOTED,
> + .halt_check = BRANCH_HALT_DELAY,
> .hwcg_reg = 0x39068,
> .hwcg_bit = 1,
> .clkr = {
> @@ -5257,7 +5257,7 @@ static struct clk_regmap_mux gcc_usb3_sec_phy_pipe_clk_src = {
>
> static struct clk_branch gcc_usb3_sec_phy_pipe_clk = {
> .halt_reg = 0xa1068,
> - .halt_check = BRANCH_HALT_VOTED,
> + .halt_check = BRANCH_HALT_DELAY,
> .hwcg_reg = 0xa1068,
> .hwcg_bit = 1,
> .clkr = {
> @@ -5327,7 +5327,7 @@ static struct clk_regmap_mux gcc_usb3_tert_phy_pipe_clk_src = {
>
> static struct clk_branch gcc_usb3_tert_phy_pipe_clk = {
> .halt_reg = 0xa2068,
> - .halt_check = BRANCH_HALT_VOTED,
> + .halt_check = BRANCH_HALT_DELAY,
> .hwcg_reg = 0xa2068,
> .hwcg_bit = 1,
> .clkr = {
>
> ---
> base-commit: 9d99040b1bc8dbf385a8aa535e9efcdf94466e19
> change-id: 20240530-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-ef8cf5b5631b
>
> Best regards,
> --
> Abel Vesa <abel.vesa@...aro.org>
>
>
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists