linux-kernel - Re: [PATCH net-next V2] virtio-net: synchronize operstate with admin state on up/down

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CACGkMEsYRCJ96=sja9pBo_mnPsp75Go6E-wmm=-QX0kaOu4RFQ@mail.gmail.com>
Date: Fri, 31 May 2024 08:18:00 +0800
From: Jason Wang <jasowang@...hat.com>
To: "Michael S. Tsirkin" <mst@...hat.com>
Cc: xuanzhuo@...ux.alibaba.com, eperezma@...hat.com, davem@...emloft.net, 
	edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com, 
	virtualization@...ts.linux.dev, netdev@...r.kernel.org, 
	linux-kernel@...r.kernel.org, 
	Venkat Venkatsubra <venkat.x.venkatsubra@...cle.com>, 
	Gia-Khanh Nguyen <gia-khanh.nguyen@...cle.com>
Subject: Re: [PATCH net-next V2] virtio-net: synchronize operstate with admin
 state on up/down

On Thu, May 30, 2024 at 9:09 PM Michael S. Tsirkin <mst@...hat.com> wrote:
>
> On Thu, May 30, 2024 at 06:29:51PM +0800, Jason Wang wrote:
> > On Thu, May 30, 2024 at 2:10 PM Michael S. Tsirkin <mst@...hat.com> wrote:
> > >
> > > On Thu, May 30, 2024 at 11:20:55AM +0800, Jason Wang wrote:
> > > > This patch synchronize operstate with admin state per RFC2863.
> > > >
> > > > This is done by trying to toggle the carrier upon open/close and
> > > > synchronize with the config change work. This allows propagate status
> > > > correctly to stacked devices like:
> > > >
> > > > ip link add link enp0s3 macvlan0 type macvlan
> > > > ip link set link enp0s3 down
> > > > ip link show
> > > >
> > > > Before this patch:
> > > >
> > > > 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> > > >     link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> > > > ......
> > > > 5: macvlan0@...0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
> > > >     link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
> > > >
> > > > After this patch:
> > > >
> > > > 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> > > >     link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> > > > ...
> > > > 5: macvlan0@...0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
> > > >     link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
> > > >
> > > > Cc: Venkat Venkatsubra <venkat.x.venkatsubra@...cle.com>
> > > > Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@...cle.com>
> > > > Reviewed-by: Xuan Zhuo <xuanzhuo@...ux.alibaba.com>
> > > > Acked-by: Michael S. Tsirkin <mst@...hat.com>
> > > > Signed-off-by: Jason Wang <jasowang@...hat.com>
> > > > ---
> > > > Changes since V1:
> > > > - rebase
> > > > - add ack/review tags
> > >
> > >
> > >
> > >
> > >
> > > > ---
> > > >  drivers/net/virtio_net.c | 94 +++++++++++++++++++++++++++-------------
> > > >  1 file changed, 63 insertions(+), 31 deletions(-)
> > > >
> > > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > > > index 4a802c0ea2cb..69e4ae353c51 100644
> > > > --- a/drivers/net/virtio_net.c
> > > > +++ b/drivers/net/virtio_net.c
> > > > @@ -433,6 +433,12 @@ struct virtnet_info {
> > > >       /* The lock to synchronize the access to refill_enabled */
> > > >       spinlock_t refill_lock;
> > > >
> > > > +     /* Is config change enabled? */
> > > > +     bool config_change_enabled;
> > > > +
> > > > +     /* The lock to synchronize the access to config_change_enabled */
> > > > +     spinlock_t config_change_lock;
> > > > +
> > > >       /* Work struct for config space updates */
> > > >       struct work_struct config_work;
> > > >
> > >
> > >
> > > But we already have dev->config_lock and dev->config_enabled.
> > >
> > > And it actually works better - instead of discarding config
> > > change events it defers them until enabled.
> > >
> >
> > Yes but then both virtio-net driver and virtio core can ask to enable
> > and disable and then we need some kind of synchronization which is
> > non-trivial.
>
> Well for core it happens on bring up path before driver works
> and later on tear down after it is gone.
> So I do not think they ever do it at the same time.

For example, there could be a suspend/resume when the admin state is down.

>
>
> > And device enabling on the core is different from bringing the device
> > up in the networking subsystem. Here we just delay to deal with the
> > config change interrupt on ndo_open(). (E.g try to ack announce is
> > meaningless when the device is down).
> >
> > Thanks
>
> another thing is that it is better not to re-read all config
> on link up if there was no config interrupt - less vm exits.

Yes, but it should not matter much as it's done in the ndo_open().

Thanks

>
> --
> MST
>