| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240531193115.3814887-1-robh@kernel.org>
Date: Fri, 31 May 2024 14:31:14 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>
Cc: devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name
The standard node name for I2C buses is 'i2c'.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 28 +++++++++++-----------
arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 28 +++++++++++-----------
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 32 ++++++++++++-------------
3 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 857cb26ed6d7..c669ec202085 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -463,7 +463,7 @@ i2c_ic: interrupt-controller@0 {
interrupt-controller;
};
- i2c0: i2c-bus@40 {
+ i2c0: i2c@40 {
#address-cells = <1>;
#size-cells = <0>;
@@ -478,7 +478,7 @@ i2c0: i2c-bus@40 {
/* Does not need pinctrl properties */
};
- i2c1: i2c-bus@80 {
+ i2c1: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
@@ -493,7 +493,7 @@ i2c1: i2c-bus@80 {
/* Does not need pinctrl properties */
};
- i2c2: i2c-bus@c0 {
+ i2c2: i2c@c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -509,7 +509,7 @@ i2c2: i2c-bus@c0 {
status = "disabled";
};
- i2c3: i2c-bus@100 {
+ i2c3: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
@@ -525,7 +525,7 @@ i2c3: i2c-bus@100 {
status = "disabled";
};
- i2c4: i2c-bus@140 {
+ i2c4: i2c@140 {
#address-cells = <1>;
#size-cells = <0>;
@@ -541,7 +541,7 @@ i2c4: i2c-bus@140 {
status = "disabled";
};
- i2c5: i2c-bus@180 {
+ i2c5: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
@@ -557,7 +557,7 @@ i2c5: i2c-bus@180 {
status = "disabled";
};
- i2c6: i2c-bus@1c0 {
+ i2c6: i2c@1c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -573,7 +573,7 @@ i2c6: i2c-bus@1c0 {
status = "disabled";
};
- i2c7: i2c-bus@300 {
+ i2c7: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
@@ -589,7 +589,7 @@ i2c7: i2c-bus@300 {
status = "disabled";
};
- i2c8: i2c-bus@340 {
+ i2c8: i2c@340 {
#address-cells = <1>;
#size-cells = <0>;
@@ -605,7 +605,7 @@ i2c8: i2c-bus@340 {
status = "disabled";
};
- i2c9: i2c-bus@380 {
+ i2c9: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
@@ -621,7 +621,7 @@ i2c9: i2c-bus@380 {
status = "disabled";
};
- i2c10: i2c-bus@3c0 {
+ i2c10: i2c@3c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -637,7 +637,7 @@ i2c10: i2c-bus@3c0 {
status = "disabled";
};
- i2c11: i2c-bus@400 {
+ i2c11: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -653,7 +653,7 @@ i2c11: i2c-bus@400 {
status = "disabled";
};
- i2c12: i2c-bus@440 {
+ i2c12: i2c@440 {
#address-cells = <1>;
#size-cells = <0>;
@@ -669,7 +669,7 @@ i2c12: i2c-bus@440 {
status = "disabled";
};
- i2c13: i2c-bus@480 {
+ i2c13: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index e6f3cf3c721e..6e05cbcce49c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -592,7 +592,7 @@ i2c_ic: interrupt-controller@0 {
interrupt-controller;
};
- i2c0: i2c-bus@40 {
+ i2c0: i2c@40 {
#address-cells = <1>;
#size-cells = <0>;
@@ -607,7 +607,7 @@ i2c0: i2c-bus@40 {
/* Does not need pinctrl properties */
};
- i2c1: i2c-bus@80 {
+ i2c1: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
@@ -622,7 +622,7 @@ i2c1: i2c-bus@80 {
/* Does not need pinctrl properties */
};
- i2c2: i2c-bus@c0 {
+ i2c2: i2c@c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -638,7 +638,7 @@ i2c2: i2c-bus@c0 {
status = "disabled";
};
- i2c3: i2c-bus@100 {
+ i2c3: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
@@ -654,7 +654,7 @@ i2c3: i2c-bus@100 {
status = "disabled";
};
- i2c4: i2c-bus@140 {
+ i2c4: i2c@140 {
#address-cells = <1>;
#size-cells = <0>;
@@ -670,7 +670,7 @@ i2c4: i2c-bus@140 {
status = "disabled";
};
- i2c5: i2c-bus@180 {
+ i2c5: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
@@ -686,7 +686,7 @@ i2c5: i2c-bus@180 {
status = "disabled";
};
- i2c6: i2c-bus@1c0 {
+ i2c6: i2c@1c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -702,7 +702,7 @@ i2c6: i2c-bus@1c0 {
status = "disabled";
};
- i2c7: i2c-bus@300 {
+ i2c7: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
@@ -718,7 +718,7 @@ i2c7: i2c-bus@300 {
status = "disabled";
};
- i2c8: i2c-bus@340 {
+ i2c8: i2c@340 {
#address-cells = <1>;
#size-cells = <0>;
@@ -734,7 +734,7 @@ i2c8: i2c-bus@340 {
status = "disabled";
};
- i2c9: i2c-bus@380 {
+ i2c9: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
@@ -750,7 +750,7 @@ i2c9: i2c-bus@380 {
status = "disabled";
};
- i2c10: i2c-bus@3c0 {
+ i2c10: i2c@3c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -766,7 +766,7 @@ i2c10: i2c-bus@3c0 {
status = "disabled";
};
- i2c11: i2c-bus@400 {
+ i2c11: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -782,7 +782,7 @@ i2c11: i2c-bus@400 {
status = "disabled";
};
- i2c12: i2c-bus@440 {
+ i2c12: i2c@440 {
#address-cells = <1>;
#size-cells = <0>;
@@ -798,7 +798,7 @@ i2c12: i2c-bus@440 {
status = "disabled";
};
- i2c13: i2c-bus@480 {
+ i2c13: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 7fb421153596..0c00882f111a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -905,7 +905,7 @@ udma: dma-controller@...9e000 {
#include "aspeed-g6-pinctrl.dtsi"
&i2c {
- i2c0: i2c-bus@80 {
+ i2c0: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80 0x80>;
@@ -919,7 +919,7 @@ i2c0: i2c-bus@80 {
status = "disabled";
};
- i2c1: i2c-bus@100 {
+ i2c1: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x100 0x80>;
@@ -933,7 +933,7 @@ i2c1: i2c-bus@100 {
status = "disabled";
};
- i2c2: i2c-bus@180 {
+ i2c2: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x180 0x80>;
@@ -947,7 +947,7 @@ i2c2: i2c-bus@180 {
status = "disabled";
};
- i2c3: i2c-bus@200 {
+ i2c3: i2c@200 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x200 0x80>;
@@ -961,7 +961,7 @@ i2c3: i2c-bus@200 {
status = "disabled";
};
- i2c4: i2c-bus@280 {
+ i2c4: i2c@280 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x280 0x80>;
@@ -975,7 +975,7 @@ i2c4: i2c-bus@280 {
status = "disabled";
};
- i2c5: i2c-bus@300 {
+ i2c5: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x300 0x80>;
@@ -989,7 +989,7 @@ i2c5: i2c-bus@300 {
status = "disabled";
};
- i2c6: i2c-bus@380 {
+ i2c6: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x380 0x80>;
@@ -1003,7 +1003,7 @@ i2c6: i2c-bus@380 {
status = "disabled";
};
- i2c7: i2c-bus@400 {
+ i2c7: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x400 0x80>;
@@ -1017,7 +1017,7 @@ i2c7: i2c-bus@400 {
status = "disabled";
};
- i2c8: i2c-bus@480 {
+ i2c8: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x480 0x80>;
@@ -1031,7 +1031,7 @@ i2c8: i2c-bus@480 {
status = "disabled";
};
- i2c9: i2c-bus@500 {
+ i2c9: i2c@500 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x500 0x80>;
@@ -1045,7 +1045,7 @@ i2c9: i2c-bus@500 {
status = "disabled";
};
- i2c10: i2c-bus@580 {
+ i2c10: i2c@580 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x580 0x80>;
@@ -1059,7 +1059,7 @@ i2c10: i2c-bus@580 {
status = "disabled";
};
- i2c11: i2c-bus@600 {
+ i2c11: i2c@600 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x600 0x80>;
@@ -1073,7 +1073,7 @@ i2c11: i2c-bus@600 {
status = "disabled";
};
- i2c12: i2c-bus@680 {
+ i2c12: i2c@680 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x680 0x80>;
@@ -1087,7 +1087,7 @@ i2c12: i2c-bus@680 {
status = "disabled";
};
- i2c13: i2c-bus@700 {
+ i2c13: i2c@700 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x700 0x80>;
@@ -1101,7 +1101,7 @@ i2c13: i2c-bus@700 {
status = "disabled";
};
- i2c14: i2c-bus@780 {
+ i2c14: i2c@780 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x780 0x80>;
@@ -1115,7 +1115,7 @@ i2c14: i2c-bus@780 {
status = "disabled";
};
- i2c15: i2c-bus@800 {
+ i2c15: i2c@800 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x800 0x80>;
--
2.43.0
Powered by blists - more mailing lists