linux-kernel - [PATCH 2/4] arm64: dts: ls1043a: Change I2C clock name to ipg to fix DTB

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Fri, 31 May 2024 17:50:15 -0400
From: Frank Li <Frank.Li@....com>
To: frank.li@....com,
	shawnguo@...nel.org
Cc: conor+dt@...nel.org,
	devicetree@...r.kernel.org,
	imx@...ts.linux.dev,
	krzk+dt@...nel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	robh@...nel.org
Subject: [PATCH 2/4] arm64: dts: ls1043a: Change I2C clock name to ipg to fix DTB_CHECK warning

dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c"
to fix below DTB_CHECK warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: i2c@...0000: clock-names:0: 'ipg' was expecte

Signed-off-by: Frank Li <Frank.Li@....com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 8ee6d8c0ef619..a4a476b04ebe3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -533,7 +533,7 @@ i2c0: i2c@...0000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <0 56 0x4>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			dmas = <&edma0 1 38>,
@@ -548,7 +548,7 @@ i2c1: i2c@...0000 {
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <0 57 0x4>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -561,7 +561,7 @@ i2c2: i2c@...0000 {
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <0 58 0x4>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -574,7 +574,7 @@ i2c3: i2c@...0000 {
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
 			interrupts = <0 59 0x4>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-- 
2.34.1