lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a7390da4-d830-438f-97ab-cb1b30d86385@linaro.org>
Date: Fri, 31 May 2024 14:35:08 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Abel Vesa <abel.vesa@...aro.org>, Bjorn Andersson <andersson@...nel.org>,
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>, Sibi Sankar <quic_sibis@...cinc.com>,
 Rajendra Nayak <quic_rjendra@...cinc.com>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: qcom: x1e80100: Describe the PCIe 6a
 resources

On 30.05.2024 5:43 PM, Abel Vesa wrote:
> On both the CRD and QCP, on PCIe 6a sits the NVMe. Add the 3.3V
> gpio-controlled regulator and the clkreq, perst and wake gpios as
> resources for the PCIe 6a.
> 
> Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 52 +++++++++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 52 +++++++++++++++++++++++++++++++
>  2 files changed, 104 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> index 3ce2c8a841ec..10ec40a193fb 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> @@ -173,6 +173,20 @@ vreg_edp_3p3: regulator-edp-3p3 {
>  		regulator-always-on;
>  		regulator-boot-on;
>  	};
> +
> +	vreg_nvme: regulator-nvme {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "VREG_NVME_3P3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +
> +		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&nvme_reg_en>;

property-n
property-names

Konrad

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ