| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240531150712.2503554-8-amelie.delaunay@foss.st.com>
Date: Fri, 31 May 2024 17:07:07 +0200
From: Amelie Delaunay <amelie.delaunay@...s.st.com>
To: Vinod Koul <vkoul@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof
Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley
<conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre
Torgue <alexandre.torgue@...s.st.com>
CC: <dmaengine@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<linux-hardening@...r.kernel.org>,
Amelie Delaunay
<amelie.delaunay@...s.st.com>
Subject: [PATCH v4 07/12] dmaengine: stm32-dma3: add DMA_MEMCPY capability
Add DMA_MEMCPY capability and relative device_prep_dma_memcpy ops with
stm32_dma3_prep_dma_memcpy(). It reuses stm32_dma3_chan_prep_hw() and
stm32_dma3_prep_hwdesc() helpers.
As this driver relies on both device_config and of_xlate ops to
pre-configure the channel for transfer, add a new helper
(stm32_dma3_init_chan_config_for_memcpy) in case the channel is used
without being pre-configured (with DT and/or dmaengine_slave_config()).
Signed-off-by: Amelie Delaunay <amelie.delaunay@...s.st.com>
---
drivers/dma/stm32/stm32-dma3.c | 131 ++++++++++++++++++++++++++++++++-
1 file changed, 130 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/stm32/stm32-dma3.c b/drivers/dma/stm32/stm32-dma3.c
index fc131c758d7c..31c5b0e3fd18 100644
--- a/drivers/dma/stm32/stm32-dma3.c
+++ b/drivers/dma/stm32/stm32-dma3.c
@@ -222,6 +222,11 @@ enum stm32_dma3_port_data_width {
#define STM32_DMA3_DT_PFREQ BIT(9) /* CTR2_PFREQ */
#define STM32_DMA3_DT_TCEM GENMASK(13, 12) /* CTR2_TCEM */
+/* struct stm32_dma3_chan .config_set bitfield */
+#define STM32_DMA3_CFG_SET_DT BIT(0)
+#define STM32_DMA3_CFG_SET_DMA BIT(1)
+#define STM32_DMA3_CFG_SET_BOTH (STM32_DMA3_CFG_SET_DT | STM32_DMA3_CFG_SET_DMA)
+
#define STM32_DMA3_MAX_BLOCK_SIZE ALIGN_DOWN(CBR1_BNDT, 64)
#define port_is_ahb(maxdw) ({ typeof(maxdw) (_maxdw) = (maxdw); \
((_maxdw) != DW_INVALID) && ((_maxdw) == DW_32); })
@@ -281,6 +286,7 @@ struct stm32_dma3_chan {
bool semaphore_mode;
struct stm32_dma3_dt_conf dt_config;
struct dma_slave_config dma_config;
+ u8 config_set;
struct dma_pool *lli_pool;
struct stm32_dma3_swdesc *swdesc;
enum ctr2_tcem tcem;
@@ -548,7 +554,7 @@ static int stm32_dma3_chan_prep_hw(struct stm32_dma3_chan *chan, enum dma_transf
{
struct stm32_dma3_ddata *ddata = to_stm32_dma3_ddata(chan);
struct dma_device dma_device = ddata->dma_dev;
- u32 sdw, ddw, sbl_max, dbl_max, tcem;
+ u32 sdw, ddw, sbl_max, dbl_max, tcem, init_dw, init_bl_max;
u32 _ctr1 = 0, _ctr2 = 0;
u32 ch_conf = chan->dt_config.ch_conf;
u32 tr_conf = chan->dt_config.tr_conf;
@@ -667,6 +673,49 @@ static int stm32_dma3_chan_prep_hw(struct stm32_dma3_chan *chan, enum dma_transf
break;
+ case DMA_MEM_TO_MEM:
+ /* Set source (memory) data width and burst */
+ init_dw = sdw;
+ init_bl_max = sbl_max;
+ sdw = stm32_dma3_get_max_dw(chan->max_burst, sap_max_dw, len, src_addr);
+ sbl_max = stm32_dma3_get_max_burst(len, sdw, chan->max_burst);
+ if (chan->config_set & STM32_DMA3_CFG_SET_DMA) {
+ sdw = min_t(u32, init_dw, sdw);
+ sbl_max = min_t(u32, init_bl_max,
+ stm32_dma3_get_max_burst(len, sdw, chan->max_burst));
+ }
+
+ /* Set destination (memory) data width and burst */
+ init_dw = ddw;
+ init_bl_max = dbl_max;
+ ddw = stm32_dma3_get_max_dw(chan->max_burst, dap_max_dw, len, dst_addr);
+ dbl_max = stm32_dma3_get_max_burst(len, ddw, chan->max_burst);
+ if (chan->config_set & STM32_DMA3_CFG_SET_DMA) {
+ ddw = min_t(u32, init_dw, ddw);
+ dbl_max = min_t(u32, init_bl_max,
+ stm32_dma3_get_max_burst(len, ddw, chan->max_burst));
+ }
+
+ _ctr1 |= FIELD_PREP(CTR1_SDW_LOG2, ilog2(sdw));
+ _ctr1 |= FIELD_PREP(CTR1_SBL_1, sbl_max - 1);
+ _ctr1 |= FIELD_PREP(CTR1_DDW_LOG2, ilog2(ddw));
+ _ctr1 |= FIELD_PREP(CTR1_DBL_1, dbl_max - 1);
+
+ if (ddw != sdw) {
+ _ctr1 |= FIELD_PREP(CTR1_PAM, CTR1_PAM_PACK_UNPACK);
+ /* Should never reach this case as ddw is clamped down */
+ if (len & (ddw - 1)) {
+ dev_err(chan2dev(chan),
+ "Packing mode is enabled and len is not multiple of ddw");
+ return -EINVAL;
+ }
+ }
+
+ /* CTR2_REQSEL/DREQ/BREQ/PFREQ are ignored with CTR2_SWREQ=1 */
+ _ctr2 |= CTR2_SWREQ;
+
+ break;
+
default:
dev_err(chan2dev(chan), "Direction %s not supported\n",
dmaengine_get_direction_text(dir));
@@ -936,6 +985,82 @@ static void stm32_dma3_free_chan_resources(struct dma_chan *c)
/* Reset configuration */
memset(&chan->dt_config, 0, sizeof(chan->dt_config));
memset(&chan->dma_config, 0, sizeof(chan->dma_config));
+ chan->config_set = 0;
+}
+
+static void stm32_dma3_init_chan_config_for_memcpy(struct stm32_dma3_chan *chan,
+ dma_addr_t dst, dma_addr_t src)
+{
+ struct stm32_dma3_ddata *ddata = to_stm32_dma3_ddata(chan);
+ u32 dw = get_chan_max_dw(ddata->ports_max_dw[0], chan->max_burst); /* port 0 by default */
+ u32 burst = chan->max_burst / dw;
+
+ /* Initialize dt_config if channel not pre-configured through DT */
+ if (!(chan->config_set & STM32_DMA3_CFG_SET_DT)) {
+ chan->dt_config.ch_conf = FIELD_PREP(STM32_DMA3_DT_PRIO, CCR_PRIO_VERY_HIGH);
+ chan->dt_config.ch_conf |= FIELD_PREP(STM32_DMA3_DT_FIFO, chan->fifo_size);
+ chan->dt_config.tr_conf = STM32_DMA3_DT_SINC | STM32_DMA3_DT_DINC;
+ chan->dt_config.tr_conf |= FIELD_PREP(STM32_DMA3_DT_TCEM, CTR2_TCEM_CHANNEL);
+ }
+
+ /* Initialize dma_config if dmaengine_slave_config() not used */
+ if (!(chan->config_set & STM32_DMA3_CFG_SET_DMA)) {
+ chan->dma_config.src_addr_width = dw;
+ chan->dma_config.dst_addr_width = dw;
+ chan->dma_config.src_maxburst = burst;
+ chan->dma_config.dst_maxburst = burst;
+ chan->dma_config.src_addr = src;
+ chan->dma_config.dst_addr = dst;
+ }
+}
+
+static struct dma_async_tx_descriptor *stm32_dma3_prep_dma_memcpy(struct dma_chan *c,
+ dma_addr_t dst, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct stm32_dma3_chan *chan = to_stm32_dma3_chan(c);
+ struct stm32_dma3_swdesc *swdesc;
+ size_t next_size, offset;
+ u32 count, i, ctr1, ctr2;
+
+ count = DIV_ROUND_UP(len, STM32_DMA3_MAX_BLOCK_SIZE);
+
+ swdesc = stm32_dma3_chan_desc_alloc(chan, count);
+ if (!swdesc)
+ return NULL;
+
+ if (chan->config_set != STM32_DMA3_CFG_SET_BOTH)
+ stm32_dma3_init_chan_config_for_memcpy(chan, dst, src);
+
+ for (i = 0, offset = 0; offset < len; i++, offset += next_size) {
+ size_t remaining;
+ int ret;
+
+ remaining = len - offset;
+ next_size = min_t(size_t, remaining, STM32_DMA3_MAX_BLOCK_SIZE);
+
+ ret = stm32_dma3_chan_prep_hw(chan, DMA_MEM_TO_MEM, &swdesc->ccr, &ctr1, &ctr2,
+ src + offset, dst + offset, next_size);
+ if (ret)
+ goto err_desc_free;
+
+ stm32_dma3_chan_prep_hwdesc(chan, swdesc, i, src + offset, dst + offset, next_size,
+ ctr1, ctr2, next_size == remaining, false);
+ }
+
+ /* Enable Errors interrupts */
+ swdesc->ccr |= CCR_USEIE | CCR_ULEIE | CCR_DTEIE;
+ /* Enable Transfer state interrupts */
+ swdesc->ccr |= CCR_TCIE;
+
+ swdesc->cyclic = false;
+
+ return vchan_tx_prep(&chan->vchan, &swdesc->vdesc, flags);
+
+err_desc_free:
+ stm32_dma3_chan_desc_free(chan, swdesc);
+
+ return NULL;
}
static struct dma_async_tx_descriptor *stm32_dma3_prep_slave_sg(struct dma_chan *c,
@@ -1119,6 +1244,7 @@ static int stm32_dma3_config(struct dma_chan *c, struct dma_slave_config *config
struct stm32_dma3_chan *chan = to_stm32_dma3_chan(c);
memcpy(&chan->dma_config, config, sizeof(*config));
+ chan->config_set |= STM32_DMA3_CFG_SET_DMA;
return 0;
}
@@ -1233,6 +1359,7 @@ static struct dma_chan *stm32_dma3_of_xlate(struct of_phandle_args *dma_spec, st
chan = to_stm32_dma3_chan(c);
chan->dt_config = conf;
+ chan->config_set |= STM32_DMA3_CFG_SET_DT;
return c;
}
@@ -1331,6 +1458,7 @@ static int stm32_dma3_probe(struct platform_device *pdev)
dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask);
dma_cap_set(DMA_CYCLIC, dma_dev->cap_mask);
+ dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
dma_dev->dev = &pdev->dev;
/*
* This controller supports up to 8-byte buswidth depending on the port used and the
@@ -1352,6 +1480,7 @@ static int stm32_dma3_probe(struct platform_device *pdev)
dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
dma_dev->device_alloc_chan_resources = stm32_dma3_alloc_chan_resources;
dma_dev->device_free_chan_resources = stm32_dma3_free_chan_resources;
+ dma_dev->device_prep_dma_memcpy = stm32_dma3_prep_dma_memcpy;
dma_dev->device_prep_slave_sg = stm32_dma3_prep_slave_sg;
dma_dev->device_prep_dma_cyclic = stm32_dma3_prep_dma_cyclic;
dma_dev->device_caps = stm32_dma3_caps;
--
2.25.1
Powered by blists - more mailing lists