linux-kernel - Re: [PATCH iwl-next 03/12] idpf: split &idpf_queue into 4 strictly-typed queue structures

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Sat, 1 Jun 2024 09:53:08 +0100
From: Simon Horman <horms@...nel.org>
To: Alexander Lobakin <aleksander.lobakin@...el.com>
Cc: intel-wired-lan@...ts.osuosl.org,
	Tony Nguyen <anthony.l.nguyen@...el.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Mina Almasry <almasrymina@...gle.com>,
	nex.sw.ncis.osdt.itp.upstreaming@...el.com, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH iwl-next 03/12] idpf: split &idpf_queue into 4
 strictly-typed queue structures

On Tue, May 28, 2024 at 03:48:37PM +0200, Alexander Lobakin wrote:
> Currently, sizeof(struct idpf_queue) is 32 Kb.
> This is due to the 12-bit hashtable declaration at the end of the queue.
> This HT is needed only for Tx queues when the flow scheduling mode is
> enabled. But &idpf_queue is unified for all of the queue types,
> provoking excessive memory usage.
> The unified structure in general makes the code less effective via
> suboptimal fields placement. You can't avoid that unless you make unions
> each 2 fields. Even then, different field alignment etc., doesn't allow
> you to optimize things to the limit.
> Split &idpf_queue into 4 structures corresponding to the queue types:
> RQ (Rx queue), SQ (Tx queue), FQ (buffer queue), and CQ (completion
> queue). Place only needed fields there and shortcuts handy for hotpath.
> Allocate the abovementioned hashtable dynamically and only when needed,
> keeping &idpf_tx_queue relatively short (192 bytes, same as Rx). This HT
> is used only for OOO completions, which aren't really hotpath anyway.
> Note that this change must be done atomically, otherwise it's really
> easy to get lost and miss something.
> 
> Signed-off-by: Alexander Lobakin <aleksander.lobakin@...el.com>

...

> diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c

...

> @@ -1158,20 +1325,22 @@ static void idpf_rxq_set_descids(struct idpf_vport *vport, struct idpf_queue *q)
>   */
>  static int idpf_txq_group_alloc(struct idpf_vport *vport, u16 num_txq)
>  {
> -	bool flow_sch_en;
> -	int err, i;
> +	bool split, flow_sch_en;
> +	int i;
>  
>  	vport->txq_grps = kcalloc(vport->num_txq_grp,
>  				  sizeof(*vport->txq_grps), GFP_KERNEL);
>  	if (!vport->txq_grps)
>  		return -ENOMEM;
>  
> +	split = idpf_is_queue_model_split(vport->txq_model);
>  	flow_sch_en = !idpf_is_cap_ena(vport->adapter, IDPF_OTHER_CAPS,
>  				       VIRTCHNL2_CAP_SPLITQ_QSCHED);
>  
>  	for (i = 0; i < vport->num_txq_grp; i++) {
>  		struct idpf_txq_group *tx_qgrp = &vport->txq_grps[i];
>  		struct idpf_adapter *adapter = vport->adapter;
> +		struct idpf_txq_stash *stashes;
>  		int j;
>  
>  		tx_qgrp->vport = vport;
> @@ -1180,45 +1349,62 @@ static int idpf_txq_group_alloc(struct idpf_vport *vport, u16 num_txq)
>  		for (j = 0; j < tx_qgrp->num_txq; j++) {
>  			tx_qgrp->txqs[j] = kzalloc(sizeof(*tx_qgrp->txqs[j]),
>  						   GFP_KERNEL);
> -			if (!tx_qgrp->txqs[j]) {
> -				err = -ENOMEM;
> +			if (!tx_qgrp->txqs[j])
>  				goto err_alloc;
> -			}
> +		}
> +
> +		if (split && flow_sch_en) {
> +			stashes = kcalloc(num_txq, sizeof(*stashes),
> +					  GFP_KERNEL);

Hi Alexander,

Here stashes is assigned a memory allocation and
then then assigned to tx_qgrp->stashes a few lines below...

> +			if (!stashes)
> +				goto err_alloc;
> +
> +			tx_qgrp->stashes = stashes;
>  		}
>  
>  		for (j = 0; j < tx_qgrp->num_txq; j++) {
> -			struct idpf_queue *q = tx_qgrp->txqs[j];
> +			struct idpf_tx_queue *q = tx_qgrp->txqs[j];
>  
>  			q->dev = &adapter->pdev->dev;
>  			q->desc_count = vport->txq_desc_count;
>  			q->tx_max_bufs = idpf_get_max_tx_bufs(adapter);
>  			q->tx_min_pkt_len = idpf_get_min_tx_pkt_len(adapter);
> -			q->vport = vport;
> +			q->netdev = vport->netdev;
>  			q->txq_grp = tx_qgrp;
> -			hash_init(q->sched_buf_hash);
>  
> -			if (flow_sch_en)
> -				set_bit(__IDPF_Q_FLOW_SCH_EN, q->flags);
> +			if (!split) {
> +				q->clean_budget = vport->compln_clean_budget;
> +				idpf_queue_assign(CRC_EN, q,
> +						  vport->crc_enable);
> +			}
> +
> +			if (!flow_sch_en)
> +				continue;
> +
> +			if (split) {

... but here elements of stashes seem to be assigned to q->stash
without stashes having being initialised.

Flagged by Smatch

> +				q->stash = &stashes[j];
> +				hash_init(q->stash->sched_buf_hash);
> +			}
> +
> +			idpf_queue_set(FLOW_SCH_EN, q);
>  		}
>  
> -		if (!idpf_is_queue_model_split(vport->txq_model))
> +		if (!split)
>  			continue;
>  
>  		tx_qgrp->complq = kcalloc(IDPF_COMPLQ_PER_GROUP,
>  					  sizeof(*tx_qgrp->complq),
>  					  GFP_KERNEL);
> -		if (!tx_qgrp->complq) {
> -			err = -ENOMEM;
> +		if (!tx_qgrp->complq)
>  			goto err_alloc;
> -		}
>  
> -		tx_qgrp->complq->dev = &adapter->pdev->dev;
>  		tx_qgrp->complq->desc_count = vport->complq_desc_count;
> -		tx_qgrp->complq->vport = vport;
>  		tx_qgrp->complq->txq_grp = tx_qgrp;
> +		tx_qgrp->complq->netdev = vport->netdev;
> +		tx_qgrp->complq->clean_budget = vport->compln_clean_budget;
>  
>  		if (flow_sch_en)
> -			__set_bit(__IDPF_Q_FLOW_SCH_EN, tx_qgrp->complq->flags);
> +			idpf_queue_set(FLOW_SCH_EN, tx_qgrp->complq);
>  	}
>  
>  	return 0;
> @@ -1226,7 +1412,7 @@ static int idpf_txq_group_alloc(struct idpf_vport *vport, u16 num_txq)
>  err_alloc:
>  	idpf_txq_group_rel(vport);
>  
> -	return err;
> +	return -ENOMEM;
>  }
>  
>  /**

...