[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240601-b4-rk3588-bridge-upstream-v1-11-f6203753232b@collabora.com>
Date: Sat, 01 Jun 2024 16:12:33 +0300
From: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
To: Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>, Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>, Jernej Skrabec <jernej.skrabec@...il.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Sandy Huang <hjc@...k-chips.com>,
Heiko Stübner <heiko@...ech.de>,
Andy Yan <andy.yan@...k-chips.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Mark Yao <markyao0591@...il.com>
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org,
devicetree@...r.kernel.org, kernel@...labora.com,
Alexandre ARNOUD <aarnoud@...com>, Luis de Arquer <ldearquer@...il.com>
Subject: [PATCH 11/14] drm/rockchip: dw_hdmi: Drop superfluous assignments
of mpll_cfg, cur_ctr and phy_config
The mpll_cfg, cur_ctr and phy_config members in struct dw_hdmi_plat_data
are only used to configure the Synopsys PHYs supported internally by DW
HDMI transmitter driver (gpu/drm/bridge/synopsys/dw-hdmi.c), via
hdmi_phy_configure_dwc_hdmi_3d_tx(), which is further invoked from
dw_hdmi_phy_init(). This is part of the internal
dw_hdmi_synopsys_phy_ops struct, managed within dw_hdmi_detect_phy().
To handle vendor PHYs, DW HDMI driver doesn't make use of the internal
PHY ops and, instead, relies on the glue layer to provide the phy_ops
and phy_name members of struct dw_hdmi_plat_data.
Drop the unnecessary assignments of DW internal PHY related members from
structs rk3228_hdmi_drv_data and rk3328_hdmi_drv_data, since both set
the phy_force_vendor flag and correctly provide the expected vendor PHY
data.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
---
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index edfd877c98fc..ca6728a43159 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -444,9 +444,6 @@ static struct rockchip_hdmi_chip_data rk3228_chip_data = {
static const struct dw_hdmi_plat_data rk3228_hdmi_drv_data = {
.mode_valid = dw_hdmi_rockchip_mode_valid,
- .mpll_cfg = rockchip_mpll_cfg,
- .cur_ctr = rockchip_cur_ctr,
- .phy_config = rockchip_phy_config,
.phy_data = &rk3228_chip_data,
.phy_ops = &rk3228_hdmi_phy_ops,
.phy_name = "inno_dw_hdmi_phy2",
@@ -481,9 +478,6 @@ static struct rockchip_hdmi_chip_data rk3328_chip_data = {
static const struct dw_hdmi_plat_data rk3328_hdmi_drv_data = {
.mode_valid = dw_hdmi_rockchip_mode_valid,
- .mpll_cfg = rockchip_mpll_cfg,
- .cur_ctr = rockchip_cur_ctr,
- .phy_config = rockchip_phy_config,
.phy_data = &rk3328_chip_data,
.phy_ops = &rk3328_hdmi_phy_ops,
.phy_name = "inno_dw_hdmi_phy2",
--
2.45.0
Powered by blists - more mailing lists