linux-kernel - Re: [PATCH v2 1/7] soc: qcom: geni-se: Add GP_LENGTH/IRQ_EN_SET/IRQ_EN

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <nuxdwhd6vdickuctf75wjan3x6vtwkbypydhj5d5wewkafe66n@h5aduxfym6iz>
Date: Sat, 1 Jun 2024 23:23:32 -0500
From: Bjorn Andersson <andersson@...nel.org>
To: Douglas Anderson <dianders@...omium.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, 
	Jiri Slaby <jirislaby@...nel.org>, linux-arm-msm@...r.kernel.org, 
	John Ogness <john.ogness@...utronix.de>, 
	Uwe Kleine-König <u.kleine-koenig@...gutronix.de>, Tony Lindgren <tony@...mide.com>, 
	Stephen Boyd <swboyd@...omium.org>, linux-serial@...r.kernel.org, 
	Yicong Yang <yangyicong@...ilicon.com>, Johan Hovold <johan+linaro@...nel.org>, 
	linux-kernel@...r.kernel.org, Andy Shevchenko <andriy.shevchenko@...ux.intel.com>, 
	Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: Re: [PATCH v2 1/7] soc: qcom: geni-se: Add
 GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers

On Thu, May 30, 2024 at 03:45:53PM GMT, Douglas Anderson wrote:
> For UART devices the M_GP_LENGTH is the TX word count. For other
> devices this is the transaction word count.
> 
> For UART devices the S_GP_LENGTH is the RX word count.
> 
> The IRQ_EN set/clear registers allow you to set or clear bits in the
> IRQ_EN register without needing a read-modify-write.
> 

Acked-by: Bjorn Andersson <andersson@...nel.org>

Regards,
Bjorn

> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> ---
> Since these new definitions are used in the future UART patches the
> hope is that they could be acked by Qualcomm folks and then go through
> the same tree as the UART patches that need them.
> 
> Changes in v2:
> - New
> 
>  include/linux/soc/qcom/geni-se.h | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h
> index 0f038a1a0330..8d07c442029b 100644
> --- a/include/linux/soc/qcom/geni-se.h
> +++ b/include/linux/soc/qcom/geni-se.h
> @@ -88,11 +88,15 @@ struct geni_se {
>  #define SE_GENI_M_IRQ_STATUS		0x610
>  #define SE_GENI_M_IRQ_EN		0x614
>  #define SE_GENI_M_IRQ_CLEAR		0x618
> +#define SE_GENI_M_IRQ_EN_SET		0x61c
> +#define SE_GENI_M_IRQ_EN_CLEAR		0x620
>  #define SE_GENI_S_CMD0			0x630
>  #define SE_GENI_S_CMD_CTRL_REG		0x634
>  #define SE_GENI_S_IRQ_STATUS		0x640
>  #define SE_GENI_S_IRQ_EN		0x644
>  #define SE_GENI_S_IRQ_CLEAR		0x648
> +#define SE_GENI_S_IRQ_EN_SET		0x64c
> +#define SE_GENI_S_IRQ_EN_CLEAR		0x650
>  #define SE_GENI_TX_FIFOn		0x700
>  #define SE_GENI_RX_FIFOn		0x780
>  #define SE_GENI_TX_FIFO_STATUS		0x800
> @@ -101,6 +105,8 @@ struct geni_se {
>  #define SE_GENI_RX_WATERMARK_REG	0x810
>  #define SE_GENI_RX_RFR_WATERMARK_REG	0x814
>  #define SE_GENI_IOS			0x908
> +#define SE_GENI_M_GP_LENGTH		0x910
> +#define SE_GENI_S_GP_LENGTH		0x914
>  #define SE_DMA_TX_IRQ_STAT		0xc40
>  #define SE_DMA_TX_IRQ_CLR		0xc44
>  #define SE_DMA_TX_FSM_RST		0xc58
> -- 
> 2.45.1.288.g0e0cd299f1-goog
>