[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240603-rb2-l9a-aon-v1-1-81c35a0de43d@linaro.org>
Date: Mon, 03 Jun 2024 15:49:10 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: qcom: qrb4210-rb2: make L9A always-on
The L9A regulator is used to further control voltage regulators on the
board. Make sure that is stays always on to prevent undervolting some of
the volage rails.
Fixes: 8d58a8c0d930 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 2c39bb1b97db..e0c14d23b909 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -403,6 +403,8 @@ vreg_l9a_1p8: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
+ regulator-always-on;
+ regulator-boot-on;
};
vreg_l10a_1p8: l10 {
---
base-commit: 0e1980c40b6edfa68b6acf926bab22448a6e40c9
change-id: 20240603-rb2-l9a-aon-d1292bad5aaa
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Powered by blists - more mailing lists