[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4c6d11d0-5e5e-4fef-b8dc-78f22bf14860@gmail.com>
Date: Mon, 3 Jun 2024 17:49:07 +0100
From: Ivan Orlov <ivan.orlov0322@...il.com>
To: Mudit Sharma <muditsharma.info@...il.com>, jic23@...nel.org,
lars@...afoo.de, krzk+dt@...nel.org, conor+dt@...nel.org, robh@...nel.org
Cc: linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
On 6/3/24 17:21, Mudit Sharma wrote:
> Add support for BH1745, which is an I2C colour sensor with red, green,
> blue and clear channels. It has a programmable active low interrupt pin.
> Interrupt occurs when the signal from the selected interrupt source
> channel crosses set interrupt threshold high or low level.
>
> This driver includes device attributes to configure the following:
> - Interrupt pin latch: The interrupt pin can be configured to
> be latched (until interrupt register (0x60) is read or initialized)
> or update after each measurement.
> - Interrupt source: The colour channel that will cause the interrupt
> when channel will cross the set threshold high or low level.
>
> This driver also includes device attributes to present valid
> configuration options/values for:
> - Integration time
> - Interrupt colour source
> - Hardware gain
>
> Signed-off-by: Mudit Sharma <muditsharma.info@...il.com>
> ---
LGTM,
Reviewed-by: Ivan Orlov <ivan.orlov0322@...il.com>
--
Kind regards,
Ivan Orlov
Powered by blists - more mailing lists