[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1717486682.git.mazziesaccount@gmail.com>
Date: Tue, 4 Jun 2024 10:53:16 +0300
From: Matti Vaittinen <mazziesaccount@...il.com>
To: Matti Vaittinen <mazziesaccount@...il.com>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
Cc: Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Matti Vaittinen <mazziesaccount@...il.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>,
Thomas Gleixner <tglx@...utronix.de>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-watchdog@...r.kernel.org
Subject: [PATCH v3 00/10] Support ROHM BD96801 Scalable PMIC
Support ROHM BD96801 Scalable PMIC
The ROHM BD96801 is automotive grade PMIC, intended to be usable in
multiple solutions. The BD96801 can be used as a stand-alone, or together
with separate 'companion PMICs'. This modular approach aims to make this
PMIC suitable for various use-cases.
This series brings only limited support. The more complete set of
features was sent in the RFC:
https://lore.kernel.org/lkml/cover.1712058690.git.mazziesaccount@gmail.com/
The BD96801 provides two physical IRQ lines called "intb" and "errb" in
the data-sheet. These are handled using own regmap-IRQ controller for
both of the IRQ lines. This causes a debugFS naming conflict for IRQ
domains created by the regmap-IRQ. This series adds support for setting
a name suffix to IRQ domains. Some prior discussion can be seen here:
https://lore.kernel.org/all/Zjzt8mOW6dO_7XNV@finisterre.sirena.org.uk/
As writing of this there is no known system doing configurations which
require the PMIC to be in STBY state using Linux driver. Furthermore,
ensuring the PMIC is and stays in the STBY state when configurations
are done may not be trivial. Especially, not in a generic way in a
regulator driver. This is likely to be system specific.
Hence it felt natural to upstream only partial support for
now, while leaving a note about the RFC series with more complete
support for those who may need it later.
The patches from 1 to 6 are just typical "add support for device X"
stuff. They should provide very much usable driver for BD96801 and I
hope they don't cause too many questions and can be merged when
quality seems high enough :)
Supporting the ERRB IRQ (patches 9 and 10) requires the regmap IRQ change
(patch 8) which further requires the IRQ domain change (patch 7).
Patches 7 and 8 may need more careful thinking. Thus, the ERRB IRQ
support is added as a separate step, which can be merged later or even
dropped if the irqdomain changes prove to be unacceptable.
Revision history still tries to summarize changes from the RFC for the
reviewers.
Revision history:
v2 => v3: Mostly based on feedback from Thomas Gleixner
- Added acks from Krzysztof and Mark
- Rebased on v6.10-rc2
- Drop name suffix support for legacy IRQ domains (both
irqdomain and regmap)
- Improve the commit message for patch 7/10
v1 => v2:
- Add support for setting a name suffix for fwnode backed IRQ domains.
- Add support for setting a domain name suffix for regmap-IRQ.
- Add handling of ERRB IRQs.
- Small fixes based on feedback.
RFCv2 => v1:
- Drop ERRB IRQ from drivers (but not DT bindings).
- Drop configuration which requires STBY - state.
- Fix the register lock race by moving it from the regulator
driver to the MFD driver.
RFCv1 => RFCv2:
- Tidying code based on feedback form Krzysztof Kozlowski and
Lee Jones.
- Documented undocumented watchdog related DT properties.
- Added usage of the watchdog IRQ.
- Use irq_domain_update_bus_token() to work-around debugFS name
collision for IRQ domains.
---
Matti Vaittinen (10):
dt-bindings: ROHM BD96801 PMIC regulators
dt-bindings: mfd: bd96801 PMIC core
mfd: support ROHM BD96801 PMIC core
regulator: bd96801: ROHM BD96801 PMIC regulators
watchdog: ROHM BD96801 PMIC WDG driver
MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
irqdomain: Allow giving name suffix for domain
regmap: Allow setting IRQ domain name suffix
mfd: bd96801: Add ERRB IRQ
regulator: bd96801: Add ERRB IRQ
.../bindings/mfd/rohm,bd96801-pmic.yaml | 173 +++
.../regulator/rohm,bd96801-regulator.yaml | 63 ++
MAINTAINERS | 4 +
drivers/base/regmap/regmap-irq.c | 15 +-
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/rohm-bd96801.c | 488 ++++++++
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 2 +
drivers/regulator/bd96801-regulator.c | 1008 +++++++++++++++++
drivers/watchdog/Kconfig | 13 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bd96801_wdt.c | 416 +++++++
include/linux/irqdomain.h | 22 +-
include/linux/mfd/rohm-bd96801.h | 215 ++++
include/linux/mfd/rohm-generic.h | 1 +
include/linux/regmap.h | 4 +
kernel/irq/irqdomain.c | 37 +-
18 files changed, 2470 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
create mode 100644 drivers/mfd/rohm-bd96801.c
create mode 100644 drivers/regulator/bd96801-regulator.c
create mode 100644 drivers/watchdog/bd96801_wdt.c
create mode 100644 include/linux/mfd/rohm-bd96801.h
base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0
--
2.45.1
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists