[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZmDHHFF-qD2UBkMT@surfacebook.localdomain>
Date: Wed, 5 Jun 2024 23:14:20 +0300
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Thomas Gleixner <tglx@...utronix.de>
Cc: Herve Codina <herve.codina@...tlin.com>,
Simon Horman <horms@...nel.org>,
Sai Krishna Gajula <saikrishnag@...vell.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Lee Jones <lee@...nel.org>, Arnd Bergmann <arnd@...db.de>,
Horatiu Vultur <horatiu.vultur@...rochip.com>,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Saravana Kannan <saravanak@...gle.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Daniel Machon <daniel.machon@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
netdev@...r.kernel.org, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Allan Nielsen <allan.nielsen@...rochip.com>,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v2 11/19] irqchip: Add support for LAN966x OIC
Wed, Jun 05, 2024 at 04:17:53PM +0200, Thomas Gleixner kirjoitti:
> On Mon, May 27 2024 at 18:14, Herve Codina wrote:
...
> > + irq_reg_writel(gc, ~0, gc->chip_types[0].regs.disable);
>
> ~0U
>
> > + irq_reg_writel(gc, ~0, gc->chip_types[0].regs.ack);
...
Below just to annoy people a bit :)
(Yes, I understand that this is a prototype, it's just a pre-review in case one
want to blindly copy'n'paste it).
Other than that, I like the result!
> I just did a quick conversion to the template approach. Unsurprisingly
> it removes 30 lines of boiler plate code:
>
> +static void lan966x_oic_chip_init(struct irq_chip_generic *gc)
> +{
> + struct lan966x_oic_data *lan966x_oic = gc->domain->host_data;
> + struct lan966x_oic_chip_regs *chip_regs;
> +
> + gc->reg_base = lan966x_oic->regs;
> +
> + chip_regs = lan966x_oic_chip_regs + gc->irq_base / 32;
> + gc->chip_types[0].regs.enable = chip_regs->reg_off_ena_set;
> + gc->chip_types[0].regs.disable = chip_regs->reg_off_ena_clr;
> + gc->chip_types[0].regs.ack = chip_regs->reg_off_sticky;
> +
> + gc->chip_types[0].chip.irq_startup = lan966x_oic_irq_startup;
> + gc->chip_types[0].chip.irq_shutdown = lan966x_oic_irq_shutdown;
> + gc->chip_types[0].chip.irq_set_type = lan966x_oic_irq_set_type;
> + gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
> + gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
> + gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
> + gc->private = chip_regs;
> +
> + /* Disable all interrupts handled by this chip */
> + irq_reg_writel(gc, ~0, chip_regs->reg_off_ena_clr);
> +}
> +
> +static void lan966x_oic_chip_exit(struct irq_chip_generic *gc)
> +{
> + /* Disable and ack all interrupts handled by this chip */
> + irq_reg_writel(gc, ~0, gc->chip_types[0].regs.disable);
> + irq_reg_writel(gc, ~0, gc->chip_types[0].regs.ack);
~0U :-)
But I, for example, think that GENMASK() even better as it shows exactly what
bits we set for the HW writes.
> +}
> +
> +static void lan966x_oic_domain_init(struct irq_domain *d)
> +{
> + struct lan966x_oic_data *lan966x_oic = d->host_data;
> +
> + irq_set_chained_handler_and_data(lan966x_oic->irq, lan966x_oic_irq_handler, d);
> +}
> +
> +static int lan966x_oic_probe(struct platform_device *pdev)
> +{
> + struct irq_domain_chip_generic_info gc_info = {
> + .irqs_per_chip = 32,
> + .num_chips = 1,
> + .name = "lan966x-oic"
> + .handler = handle_level_irq,
> + .init = lan966x_oic_chip_init,
> + .destroy = lan966x_oic_chip_exit,
> + };
> +
> + struct irq_domain_info info = {
> + .fwnode = of_node_to_fwnode(pdev->dev.of_node),
It's as simple as dev_fwnode()
> + .size = LAN966X_OIC_NR_IRQ,
> + .hwirq_max = LAN966X_OIC_NR_IRQ,
> + .ops = &irq_generic_chip_ops,
> + .gc_info = &gc_info,
> + .init = lan966x_oic_domain_init,
> + };
> + struct lan966x_oic_data *lan966x_oic;
> + struct device *dev = &pdev->dev;
> +
> + lan966x_oic = devm_kmalloc(dev, sizeof(*lan966x_oic), GFP_KERNEL);
> + if (!lan966x_oic)
> + return -ENOMEM;
> +
> + lan966x_oic->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(lan966x_oic->regs))
> + return dev_err_probe(dev, PTR_ERR(lan966x_oic->regs), "failed to map resource\n");
> +
> + lan966x_oic->irq = platform_get_irq(pdev, 0);
> + if (lan966x_oic->irq < 0)
> + return dev_err_probe(dev, lan966x_oic->irq, "failed to get the IRQ\n");
> +
> + lan966x_oic->domain = irq_domain_instantiate(&info);
> + if (!lan966x_oic->domain)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, lan966x_oic);
> + return 0;
> +}
> +
> +static void lan966x_oic_remove(struct platform_device *pdev)
> +{
> + struct lan966x_oic_data *lan966x_oic = platform_get_drvdata(pdev);
> +
> + irq_set_chained_handler_and_data(lan966x_oic->irq, NULL, NULL);
> + irq_domain_remove(lan966x_oic->domain);
> +}
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists